Same exact issue with my 2014 Equinox. Thank you for this video. I cleared it and was able to use the remote start, however the second time I used it, it started, shut down and the same code popped up again. I’ll have to take it to the mechanic
I want to thank you for your video it really helped me to learn how to start the auto start on my Equinox that I've just bought. I thought something was wrong with the auto start when they've put a new motor in I thought that they didn't hook it back up but again thank you very much enjoyed your video. Also is there any way that you can send me the site on where you got the diagnostic tool for the vehicle cuz I would like to buy one
This has been happening to me lately I have a older scan gauge 2 and it was giving me a bogus code B2AAA I figured first thing to do is change remote battery I cleared the code and yes it worked right away only a few auto starts later the code came back actually this morning the car started with remote and about 2 min later it shut off . Code displayed B2Aaa then I did see a different code for a split second PO46 it seems that's the purge valve , I'm going to drive it without using the remote starter for awhile see if I get any engine codes if there's any problem even if the hood is up ,gas cap loose , etc seems like it messes it up .
I have a 2014 Chevy equinox. Went to start my car this morning with the automatic starter did not work engine light came on. I already placed camshaft Months ago so can it be the sensor on the automatic starter or the automatic starter? But I will go to AutoZone Just want you guys opinion what you think it would be
Hello I’m Damien J frm B’HAM AL, I hav an 2013 equinox, when I purchased it, it had 101,000 miles on it so I got and protect my car warranty and just so happen three months later the timing and the water pump went out and to take my car told me to take it to the Chevrolet dealership and it came out to $2200 and all I had to pay was $200 then too much later I had and Val cover leak, I thought for sure that they would not cover it by me having one claim after another but like clockwork they covered it and all I had to pay was $200 and the Chevrolet dealership told me it came out to 1200 so $470 a month for the warranty. it’s worth every penny because you get free oil changes they were told your car anywhere in the USA for free and they cover everything even if you have a supercharger or turbo charger. Also, they don’t go by mileage to start, all they ask is, is your check engine light on and what year is your car or vehicle? As long as it’s 1999 and up you are good. Just thought that everyone should know about this and is not a scam or a gimmick is just $70 per month protect my car warranty is the name of it thanks to all my Chevy owners..💯👍
well thank God I'm going to get my car looked at tomorrow cuz my engine oil light is on my traction light is on my tire tire pressure lights are on my car is a hot mess these equinoxes I don't know I've heard some bad things about him and I just got this about 5 months ago and it's been going downhill ever since then so I think we got us a lemon! and what is up with the stability track that's in these equinoxes?? they seem to cause a lot of issues and why would they put such a thing in a car when all it was going to do was give people headaches and cost more money as if we don't have enough bills as is!!!
All you did, you erased the faulty codes with your obd tester in order for the remote start to function. The check engine light will eventually come back on after 2 to 3 remote starts and after that, check engine will illuminate once again. You need to get those faulty codes fixed if you want to remote start your car as many times as you want to.
Sometimes codes get triggered but nothing is wrong. If you don't have the tester, unplug battery in engine compartment for a couple minutes, then reattach. Remote starter can work again and no codes. If the issue comes up again, look into it because an issue may really be there and not just an accidental code trigger.
![Eminem - The Death of Slim Shady [Album Trailer]](http://i.ytimg.com/vi/X0HIrS6kUYI/mqdefault.jpg)
Wow Who would have Thought a check engine light would keep the remote start from working. Great video.
Same exact issue with my 2014 Equinox. Thank you for this video. I cleared it and was able to use the remote start, however the second time I used it, it started, shut down and the same code popped up again. I’ll have to take it to the mechanic
It's always the low quality video that have the highest quality info.
Thank you so much…went to a mechanic and they said it was something way worse than this…glad your video came up and helped me out…thank you so much
I found out that if the check engine is on, then the remote starter gets deactivated and stops working for safety reasons per factory specs.
Yep. I wish the dealer had mentioned that
Thank you. You solved my issue without even watching the vidio.
I had the same problem I fixed my problem. I replaced oil sensors because I had to put a brand new battery. And automatic starter works no problem 👍🏼
I want to thank you for your video it really helped me to learn how to start the auto start on my Equinox that I've just bought. I thought something was wrong with the auto start when they've put a new motor in I thought that they didn't hook it back up but again thank you very much enjoyed your video. Also is there any way that you can send me the site on where you got the diagnostic tool for the vehicle cuz I would like to buy one
Thank you, I have the same problem. Tomorrow I going to buy one. Thank you
Thank you, very helpful!!!
Thank you this was very helpful
Thanks man very helpful
This has been happening to me lately I have a older scan gauge 2 and it was giving me a bogus code B2AAA I figured first thing to do is change remote battery I cleared the code and yes it worked right away only a few auto starts later the code came back actually this morning the car started with remote and about 2 min later it shut off . Code displayed B2Aaa then I did see a different code for a split second PO46 it seems that's the purge valve , I'm going to drive it without using the remote starter for awhile see if I get any engine codes if there's any problem even if the hood is up ,gas cap loose , etc seems like it messes it up .
very helpful thank you
Is there a way to get the remote start to work with the check engine light on.
Wow awesome! Thank you so much!God Bless!😇🙏
Check engine light on. Cadillac does aswell.
Thank you!
I have a 2014 Chevy equinox. Went to start my car this morning with the automatic starter did not work engine light came on. I already placed camshaft Months ago so can it be the sensor on the automatic starter or the automatic starter? But I will go to AutoZone Just want you guys opinion what you think it would be
Did you get it fixed?
thanks. this helped. Mine ended up being the bank 1 oxygen sensor
How’d you fix it?
@@Kamahaku I replaced both oxygen sensors
Will this be the problem on a 2010 eqanox
hi, how do i change the run time on a 2015 GMC factory remote start so it runs longer than 10 minutes?
You can't do this
Replace both CamShaft sensors. Worked for me. Replace or your car will not turn on in future.
M Escobar I just replaced the camshaft coils yesterday! Waiting on sensor to arrive.
M Escobar I was about to say, he cleared the code but what’s needed to fix it lol
@@beardedyaker9767 do you have the same vehicle mines is a 13 and it comes and goes
Your timing is probably off
how long after this did you have to put a timing chain in it?
Hello I’m Damien J frm B’HAM AL, I hav an 2013 equinox, when I purchased it, it had 101,000 miles on it so I got and protect my car warranty and just so happen three months later the timing and the water pump went out and to take my car told me to take it to the Chevrolet dealership and it came out to $2200 and all I had to pay was $200 then too much later I had and Val cover leak, I thought for sure that they would not cover it by me having one claim after another but like clockwork they covered it and all I had to pay was $200 and the Chevrolet dealership told me it came out to 1200 so $470 a month for the warranty. it’s worth every penny because you get free oil changes they were told your car anywhere in the USA for free and they cover everything even if you have a supercharger or turbo charger. Also, they don’t go by mileage to start, all they ask is, is your check engine light on and what year is your car or vehicle? As long as it’s 1999 and up you are good. Just thought that everyone should know about this and is not a scam or a gimmick is just $70 per month protect my car warranty is the name of it thanks to all my Chevy owners..💯👍
Why do you have to turn off car before taking it out
I believe this will fix my problem
But I don’t have a check engine light. Do I need to have it?
Kimberly Zamora probably keyfob then
wat was the name of the tool that u use please?
OBD reader
well thank God I'm going to get my car looked at tomorrow cuz my engine oil light is on my traction light is on my tire tire pressure lights are on my car is a hot mess these equinoxes I don't know I've heard some bad things about him and I just got this about 5 months ago and it's been going downhill ever since then so I think we got us a lemon! and what is up with the stability track that's in these equinoxes?? they seem to cause a lot of issues and why would they put such a thing in a car when all it was going to do was give people headaches and cost more money as if we don't have enough bills as is!!!
Check the fuses mine was the fuel pump number 10 red fuse on mine today
Wtfh mines not werkin sdill....
All you did, you erased the faulty codes with your obd tester in order for the remote start to function. The check engine light will eventually come back on after 2 to 3 remote starts and after that, check engine will illuminate once again. You need to get those faulty codes fixed if you want to remote start your car as many times as you want to.
samuraimaster989 just pushed down on my fuses it started 🤗!!
My obd2 don't have power is any fuse for this I can't scanner my equinox 2013
Battery may be dead
If u don't have power to you cigg lighter charging port there is a bad fuse there replace it and you will have power to the obd
Donde venden ese aparato ?
Amazon
Sometimes codes get triggered but nothing is wrong. If you don't have the tester, unplug battery in engine compartment for a couple minutes, then reattach. Remote starter can work again and no codes. If the issue comes up again, look into it because an issue may really be there and not just an accidental code trigger.
I'm looking for a bypass not the obeys
Same here lol my lights just gonna come back on… it’s been 2 years since you commented did you find anything out? 😅
You can erase the code all you want and the check engine will come back into yo fix the problem
It was just on valet Parking it is easy to take it off hold the Trump and the unlock button
It fixes the remote start
@@travisinfo7562 how about if it just makes the engine crank for 5 seconda but wont continue, no engine light on starts perfectly with the key
What you mean the trump
What if you don't have an engine light on and it doesn't work
You could still have a pending code without the check engine light being on
No duh the car isn’t gonna start with an engine light lmao
Ur voice is king of weird
No one cares about your negative comments.
I know😒
I know WHAT I’m doing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Now delete that commenT!
Dumpster
You just only deleted the light but you didn't solve the root of issue
Nice
Thank you!