Amazing how dirt can mix with grease on the wheel bearings and still work. But as much weight is here it will be ground down to nothing after a few rotations. I’m sure they remove the grease from their clothes and hair every night to reuse.
Мне такая "модернизация", напоминает Узбекистан середины 90х! Когда все запасы Союзные закончились, и технику ремонтировали у нас в заводском гараже, ну точь в точь как на этом видео! По принципу "я тебя слепила, из того что было!" 😂😂😂
Hardworking men doing a very difficult job with limited equipment. Here in the UK we'd be closed down by the Health and Safety lot for working like this. These lads just use their common sense. You definitely wouldn't want one of those rear bowls rolling over you flip flops. Well done.
Отверстия не сверлим, а прожигаем. Смазку кладём на грязь. Чисто по Пакестански. И это они ещё стараются, так как их на камеру снимают. А что и как без камеры, страшно представить. 😡😡😡
Parts that needed to be cleaned, I did not see anyone doing. Will you also be giving the steamroller a new paint job. I will not be watching the rest of this video.
Nice. Now people can buy new but lousy china construction equipment and send it to you. Same as Brabus, Ruf, ... send the new to get modified and rebadged before putting it "on the road".
I appreciate the way you guys work way harder than you have to. A few simple self made tools and your job would be way easier. But no, you refuse to do it and work your ass off. Putting yourself in danger over and over.. principles. I get it.
We don't drill holes or "trim" material off, we just "blow" holes with a torch or turn up the voltage & "burn" the excess material off.....my gosh!!
Amazing how dirt can mix with grease on the wheel bearings and still work. But as much weight is here it will be ground down to nothing after a few rotations. I’m sure they remove the grease from their clothes and hair every night to reuse.
i think they work for rag industries🤣
The dirt on the bearing will not harm it, right?..LOL
great to see the art of bodging is still going strong just like this roller should be good for another 10 years
They can obviously keep old crap running for ever with bugger all. The way the west is going, could we?
Эти походу тендер выиграли на модернизацию катков😂.
Рестайлинг.
Мне такая "модернизация", напоминает Узбекистан середины 90х! Когда все запасы Союзные закончились, и технику ремонтировали у нас в заводском гараже, ну точь в точь как на этом видео! По принципу "я тебя слепила, из того что было!" 😂😂😂
@@zitel-zemli0671 а каточек-то копия советского, по-моему)
@@dfgggfg
А чёрт его знает!! Вроде похож!
it is amazing how dirty the bearings and grease is when they assemble this stuff.
They do not believe in cleaning much
That's to ensure it wears out quickly. Pakistani planned obsolescence.
@@andrewallen9993 it must be maintained as a Formula 1 Road Roller.
@@raufjaleel8317 you mean needing a complete overhaul after every race like an F1 car?
This machine looks like it has been maintained by Pakistani experts.
Hardworking men doing a very difficult job with limited equipment. Here in the UK we'd be closed down by the Health and Safety lot for working like this. These lads just use their common sense. You definitely wouldn't want one of those rear bowls rolling over you flip flops. Well done.
Or a British standard steel toed boot either!
@@andrewallen9993 😄
I'm sorry I wouldn't call this an expert repair. They do work very hard.
Без рюшечек и бирюлек "реставрацию" считаю незаконченной 😂
Отверстия не сверлим, а прожигаем.
Смазку кладём на грязь.
Чисто по Пакестански.
И это они ещё стараются, так как их на камеру снимают.
А что и как без камеры, страшно представить.
😡😡😡
The tenacity of these men is great to watch. I could only imagine what they could do with proper tools and a modern workshop.
Hard work-labor intensive job hats off for all..
Is it me, or are we missing a few parts yet?
Hard work without the correct equipment...but at 15:40 we can see how to destroy all the bearings!
Каток "Ну погоди" еще побегает!
🤣
I hope those are electric powered rollers . We have to save the environment.
I must have blinked and missed the expert refurbished bit
Нет самой главной детали, антикрыла.🧐
Very hard work perfectly executed. BRAVO. GERRY G. from canada.
За такой ремонт их надо бить ногами, пока все бракодельчество вместе с душой не отлетит!
Calling this "expertly refurnished" is like calling President Biden cognitive after he has the instructions printed on his toilet paper
Expertly refurbished?....🤔......😂😂😂😂😂......🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Как то аж жутко стало после просмотра… Сколько дурной, бессмысленной тяжелой работы.
I am always amazed by the process. Great job👍
That was a great video. More of these types of videos please ! Well done.
If a little grease is good then ALL the grease is best!!
Parts that needed to be cleaned, I did not see anyone doing. Will you also be giving the steamroller a new paint job. I will not be watching the rest of this video.
They removed the wheels to install fresh dirt ..well done
I wish they had safety equipment.
Wouldn't actually call this expert refurbishment.. Can't even clean the debris out of the bearing races.
Looks like it's filmed in Marseille, France.
Excellent video ! 👍
Bahut Mushkil kaam hai good work.👍
What a joke. 3 Stooges were more efficient than these guys.
These guys are very hardworking, hats off for them.
🤡🤡🤡NPP Zvesda K 36,Ejection seat ! ! !
Such a depressing job without the proper tools.
Health and Safety at its Best
Im so glad im not the owner of that roller!!!!
If you have 2 you should race them 😂
Hard work,👍👍👍
Nice. Now people can buy new but lousy china construction equipment and send it to you. Same as Brabus, Ruf, ... send the new to get modified and rebadged before putting it "on the road".
Top job mates
Good job. God bless you all.
My blind grandmother could paint better than that 😂😂😂
where was it made to run ??????
Может вы себе сверло купите???
I appreciate the way you guys work way harder than you have to. A few simple self made tools and your job would be way easier. But no, you refuse to do it and work your ass off. Putting yourself in danger over and over.. principles. I get it.
They can't change it - it's allah's will.
Orkz
Fail ..we wanted to see it painted , looking new
Ремонтники от бога
Great job👍
Αυτά τα μηχανήματα τα βλέπεις μόνο σε μουσεία
This work is not easy.
Great work, hard work 👍🏻❤️
Where is the elephant s ?
That dude welding.... wow. Going to be blind very soon.
🤗😎👌👍👍
♥ 😘 from Pakistan 🇵🇰 ♥ 😘
OMG 'Expertly Refurbished' this is what I call a redneck restoration!!! Drilling holes with oxy-acet burner??????
Awesome Work......
wow...looks great
Good job as always
They are muslim very talented great bahi
Steinzeit
abhi thik karta hu😂
Poor Pakistani people
🤨