Refurbishing Car Wheels at Home!
HTML-код
- Опубликовано: 11 апр 2019
- Official Store www.vasyn.com
Subscribe to my channel for constant uploads! bit.ly/2mDCQD3
Refurbishing and Powdercoating Car Wheels at Home!
Powder Coat Gun: ebay.to/2IbWQrA
Gold Powder Coat: bit.ly/2v0PCxV
Clear Powder Coat: bit.ly/2IcUhoZ
Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
Amazon: amzn.to/2z6hMbF
Evo 8 Parts List:
Tuning: bit.ly/2GvX4YY
Manley H-Beam Rods: ebay.to/2I8jzpo
Wiseco Pistons: ebay.to/2RMVG6b
HKS 272 Cams: goo.gl/xNmg4G
AEM Cam Gears: ebay.to/2RNNz9h
ARP Studs: ebay.to/2WPIYHB
Clear Cam Cover: ebay.to/2SyL3bA
Comp Stage 3 Clutch: ebay.to/2TDjICp
FP Manifold: goo.gl/xNmg4G
Megan Downpipe: ebay.to/2RPLrhD
Cusco Heat Shield: ebay.to/2MSM0pK
Turbosmart BOV: ebay.to/2GvAobh
o2 Dump Housing: ebay.to/2TBVFUf
Intercooler Piping: ebay.to/2TFJ3vq
Fuel Pump: bit.ly/2HWqkKv
25G Turbo: bit.ly/2RN6scB
ETS Intake: ebay.to/2BmVMMo
EBCS: ebay.to/2Si7hzd
EBCS Harness: goo.gl/NWiRba
4 Bar MAP: ebay.to/2ShQgFb
HKS Coilovers: ebay.to/2BpaqD1
LED Interior Lights: ebay.to/2DlDdbv
Wide Band: ebay.to/2GxcfRK
Shift, eBrake Boots: goo.gl/NCepTb
Gauge Cluster: ebay.to/2RMa2nh
Fender Brackets: goo.gl/EeVmgf
10.2" Radio: amzn.to/2PwmupX
Double Din Dash Kit: ebay.to/2td8KrK
Tail Lights: bit.ly/2WJLeA9
Steering Wheel Wrap: bit.ly/2HX4RkR
Mini Battery Kit: bit.ly/2SCgNfZ
Mini Battery: ebay.to/2Tzf3Bu
Demon Eyes: bit.ly/2DZ2UjV
Camera Equipment I Use:
Sony A7Rii: goo.gl/amFpGV
Sony 28mm F2 Lens: goo.gl/YqQsmB
Sony 85mm F1.8 Lens: goo.gl/4M6eQ5
Gorilla TriPod: amzn.to/2wXm7zv
Rode Mic: goo.gl/cVrD2t
DJI Phantom 4 Pro+: goo.gl/9mNX9t
DJI Ronin S: goo.gl/EErvd7
Instagram: / dvniemela
Sponsors:
LitLightz: bit.ly/2DjVQg9 "DVNIEMELA15"
JDCustoms: bit.ly/2MX0mW4 "DVNIEMELA10"
ApexPowered: bit.ly/2GvX4YY "DEVIN10"
MVMT: bit.ly/2SnNpdZ "DVNIEMELA15"
www.braumracing.com/
www.aprperformance.com/
www.prismaticpowders.com/
www.spoolinup.com/
Send Me Stuff:
Devin Niemela
P.O. Box 225
Chattaroy, WA 99003 Авто/Мото
Id like to see more of your shop. Tools and all. If u can make a video dedicated to that
Very good job man love the color, you make it look easy. I have 2 questions for you: does the job weld come off at all during the heating time also what job weld did you use? 2 when your powdered coating the rims do you lose any of the color when you lay it down on the oven rack? Again love them gorgeous color, I'm going to start doing coating soon got my little shop almost set up. Thanks Tom.
I got big respect for you cuz everything done at home!
Hi, would you please share what kind of compressor you are using (bottle volume and productivity per minute) Also what kind of abrasive you are working on. Thanks in advance!
what temperature did you use to cure the powder coat?
Hey great video man I subed. Can you tell me what Air compressor your using or the CFM?
That’s great video. I have a question about the colour. How do you match up the colour with gold Caliper? Do you match the colour by yourself? Would you share the colour with us? Thanks
6:15 That gold bake method was incredible.. turn out awesome!
🚙🚘Have a great weekend Devin!! Keep up the amazing work!! I get stoked each day when I see a new upload!! God bless ya brother!!🙏🏻🚙🚘
Bro you make this so easy and look so good! How i wish i have a sand blaster! the possibilities are endless and i could do my Evo 9 brake calipers myself! Love you vids man, you definitely are the Jack of All Trades!
I see you got 2 different powder coats, do you first play down the base coat (color) and then the clear coat over them, and throw it in the oven?
Or do you bake it after applying base coat, and then put on clear, and bake it ?
Loving the back to stock look you're going with
What did you spray them with?
Brake parts cleaner?
Paint stripper?
Last time i saw you youre just starting out now 133k so nice. Congratz man!
Can you fit a 20” rim in a house oven?
Loving the build bro! I own a 04 blue wrx with built motor, tuned by tpg tuning outta Pittsburgh! Keep with the subie videos!
Vids are starting to be hella dope with the instrumentals during the process
What gun do you use?
eBay link is broken.
Also how much powder does it take to do a set of wheels?
What Media is being used for removing the paint? Black Beauty?
Ive never powder coated but can you have drips or overspray?
curb rash sucks. Barely clipped my wheel yesterday in a really inconspicuous spot but i cant stop seeing it every time i walk by the car and its really bothering me
So the jb weld gets magnetized too when you ground the wheels???
Man. I need a powdercoating setup in my life.
Its not too expensive to get into. Harbor freight and eastwood sells reasonably priced guns. Check craigslist for a used oven(the kind you bake food in) the powder isn't too expensive either and a pound goes a long way. I've powder coated some parts on my bike and some firearms. Sadly the oven I have is a compact one that fits in an rv so I can't fit a whole rim in it and close the door, but hey can't complain for an oven that cost me $50. I did an ar15 in a candy purple for my friend. Video of what it looks like on my channel. I think it was maybe $50 in powder that is including the base and the semi gloss clear powder, and I have enough left over to do probably 10 more.
Also I'd recommend the eastwood gun over the harbor freight gun as it has two settings. The harbor freight gun works fine with a single base. Color, but once you go to do a top coat it doesn't have enough voltage to get get the top coat to stick well without really working hard. When I did the ar15 some of the clear topcoat came loose while putting it in the oven.
Same and you should look into cerakoting at home for smaller sets the stuff is amazing!
Do a video on correcting the paint! That color looks amazing when it’s all buffed and waxed with the gold flake!
You know it's a powder coat job, not paint,this diesnt do the same with "paint correction"
Did u hotflock the clear coat?
Yo D the car is looking fire bro. Shout out from your fans over here in Virginia Beach man. There are tons of people I'm stationed with that watch your vids man. I got them all watching!
Looks great Devin. Keep up the great videos. Enjoy watching your progress
Hell yeah dude! Those wheels look fresh now! I need me a sand blaster...
@devin what kind of sand blast cabinet do you use?
What sand blasting cabinet do you have
What color is the gold you used??
Devin Niemela can chrome wheels get powder coated?
How long in the oven each wheel
Nice job. The contrast between the wheels and calipers looks great.
Jason Jones thats not contrast tho it FLOWS
Looks good! You just made me want to buy a powder coater
Did you prime these?
Here's me in the garage sanding my bbs alloys by hand, wish I had space for a sand blaster. Really envious of your equipment and space heh.
What does putting the rims in the oven do
these videos are so entertaining dude!
How many pounds of powder do you use for wheels and calipers?
I was waiting to see the JB weld repair after the powder coating... Must not have turned out good 😜
The amount of attention to detail is insane! Should do a video on how to keep a black car looking good!
Ok, how much for the 04 STI?
If I need something powder coated I know who I'm going too lol. Looks awesome bro.
Mad props to you, Sir! DIY powder coating, whodathunkit! I'm very jealous of your shop size
Bolt holes are suposed to be masked off now when you torgue them its gonna brake the paint and the torgue is going to go wrong also same think with the back surface that mounts to the hub
What did you mean by " Not destroy the sand ". Do you reuse the sand even though its got stuff in it from other jobs you've done? Thanks
It would also look sick with the STI wheel caps
that jb weld was a little too dark imo
Broooo they turned out amazing there killer man you do some quality work luv the channel 🤙
Quick tip for taking off plasti dip next just use brake cleaner and a rag or whatever and it comes off super easy
I think you picked a perfect gold for it. It’s not loud. Simple and clean!
Bro! Black lug nuts, would be a good cherry on top! Do headlights next! A set of those headlights from nikis wrx on yours would be bombbbb
Promo for wheel shop was pretty cool
5:37 what beat name is that ?
Have you found it?
What kind of sand is that? How come u dont make pinholes while blasting them?
1 thing you need to make it perfect is the STi wing on the back ASAP!!!
Good job. I enjoyed this DIY.
Why is it that in the US they use BBS's and and in all other countries they use Enkei's? they also look completely different when you compare them side by side.
STI is looking so good😍🔥
Man i wish i'd had the tools and materials to do this, i own a Abarth Grande Punto with white wheels and wanna make them gold like this like rally oem gold
Amazing work
Such Immaculate work this definitely satisfies my OCD and 😁
That looks amazing, great job!
Body filler/bondo also work awesomely
Where u from
Damn you got everything in yr shop
Bro can u help me up with my wheels i have to go revnation competition 😰😅
Looks great!
can you make you vids longer!!!!! i enjoy watching
my guy gots every piece of equipment you can think of
I'm so hungry!
What's for dinner, Hon?
Aww, you made my fav!
Gold rims.
,subtítulo en español por favor
It looks so good man 😍 Keep up the grind you’ve been on! Such an amazing youtuber who needs more credit bro, really hope you get HUGE on youtube soon and people start realising your hard work and dedication. ♥️
excellent‼️
Those turned out perfect.
thats smart heating them first so the paint will stick
Very nice deep fried weels!
Looks nice!
Best regards here from Brazil
dope vid
I think if you are looking to a stockish look you are done bro! . only need to replace de fender and you're all set!
Those wheels look Awesome man👌🏻😎👍🏻👍🏻. The powder looks exactly like paint. I honestly wouldn’t be able to tell the difference🤔.
Great Job!!
Blob eyes are awesome cars, proud owner of 04 impreza 2.5rs 🔥🔥🔥
The Brembo gold is a Brembo color I call dirty gold. It’s not a Subaru thing, it’s a Brembo thing.
You can powder coat at home but not paint your wing? I understand....powder is more forgiving but you still need to know what you are doing.
Good job!
Caught a glimpse on Insta and loved it. Nice work on the powder man.
You are one skilled man
Yer, cause we all have a sandblaster in our garage at home ... Nice if you have though
WTFFF THAT LOOKS SO FCKIN GOOD
So sick!!
Yooo it looks amazing🔥
I swear he has every single tool lmao
New headlights👌
Those headlights need to be black housing
I can see that you do mostly everything to your cars . Cool
Leave the wing off and get the rear visor(roof spoiler) that’s just me tho either way it’s a badass car
I have a feeling you’re going to sell the car?
Rudy Valdez he is for sure
Throw a fullsned sticker on it
Hell yeah reppin spokompton!! And wheelman rocks!
Whooaa you're the same of your brother!!
Bloody great job mate. :)