as per my knowledge, you are right. I do not have experience with hi-end airsoft replicas so maybe they shoot better. but i do not think that there will be significant difference for out of box performance. ofcourse accuracy and grouping will be better after tuning(for example more precise hop up unit with TDC, hi-end inned barrel, hpa...) but not as good as i would call it reliable to hit each shot because bb is still "too light" flying relatively long time - so the effect of enviroment(wind) is still too siginificant.
The accuracy is absolutely incredible, just played my SSG10 A3 for the first time this weekend. But the stock Hop Up is garbage in my opinion, only 20 clicks of adjustment can be too litle to properly adjust it for high range and it doesnt seem to be as consistent. Already ordered the Tridos 2.0 TDC and the Action Army Hop Up Chamber.
@@airsoftfantom Yeah, with 2,4J and 0.45g BBs, I usually sat around the middle mark of the HU adjustment. I played with a slight underhop at 40-50m, because one click more resulted in a big inconsistent overhop (the BB hit around 30cm too high at that range) The Tridos 2.0 TDC has nearly 60 clicks and is brutally consistent from what I saw and heard.
Novritsch quality control is awful, out the box you need to disassemble and give it a good clean with rubbing alcohol. Inner barrel comes full with metal and plastic debris, I won’t put a bb through it out the box without a good clean.
@@airsoftfantom novritsch has a video doing it on RUclips. The inner barrel usually comes with grease inside to prevent corrosion from transport…, mine had grease inside and there is another guy who did a video on RUclips about same issue 👍
I really dont know. Airsoft supressor is definitely needed on short barrel replicas such as mp5k which is loud as hell and supressor helps it much or even on mk18 but my ssg10 does not sound that loud... i have not tried to supress it yet cause i didnt felt it is needed. But many guys run it supressed so maybe it helps...
I bought a1 version and had a LOT of problems with that even send that back for fix XD now a problem is with bucking not want to hop bb more than 80m :(
ouch, sorry to hear that... as you can see my ssg worked pretty well out of box... which BB weight do You use? have you tried to clean it with rubbing alcohol?
@@airsoftfantom 0.45g alot of plastic shards,metal and old black thing was in the barrel, barrel glide ring needs change cuz it came with plastic shards which scratched the cylinder and glide rings, everything cleaned polished, shrinking tube on sprinf guide thick grease on trigger sear spring, works nice but accuracy is meh
@@airsoftfantom will do but it's gona be after august as i have Vacation late August and i'm in Bosnia and there i have more than enough space to test out range and accuracy.
it is standard configuration from factory. I bought it as 2,8J setting, hence it gives 3,05J with 0,46gBBs. I have not opened it yet, I have no clue which spring is inside.
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
Great video, the detail is very good. Seeing the flight of the BB, the hit placement, range + you cleaned the barrel 👌👍
Thanks for this. Your video was instrumental in me finally convincing my son that airsoft is not reliable beyond ~75 yards.
as per my knowledge, you are right. I do not have experience with hi-end airsoft replicas so maybe they shoot better. but i do not think that there will be significant difference for out of box performance. ofcourse accuracy and grouping will be better after tuning(for example more precise hop up unit with TDC, hi-end inned barrel, hpa...) but not as good as i would call it reliable to hit each shot because bb is still "too light" flying relatively long time - so the effect of enviroment(wind) is still too siginificant.
Very in-depth, straight to the point, all details given. 👍
Great video man! Very good job
Thanks for the video mate!
The accuracy is absolutely incredible, just played my SSG10 A3 for the first time this weekend. But the stock Hop Up is garbage in my opinion, only 20 clicks of adjustment can be too litle to properly adjust it for high range and it doesnt seem to be as consistent. Already ordered the Tridos 2.0 TDC and the Action Army Hop Up Chamber.
for me 20 clicks are not enough too, especialy for fine tuning for long distances.
@@airsoftfantom Yeah, with 2,4J and 0.45g BBs, I usually sat around the middle mark of the HU adjustment. I played with a slight underhop at 40-50m, because one click more resulted in a big inconsistent overhop (the BB hit around 30cm too high at that range)
The Tridos 2.0 TDC has nearly 60 clicks and is brutally consistent from what I saw and heard.
Novritsch quality control is awful, out the box you need to disassemble and give it a good clean with rubbing alcohol. Inner barrel comes full with metal and plastic debris, I won’t put a bb through it out the box without a good clean.
Ok, so i will clean it now, this test was done without any disassmbly nor cleaning... thanks for info👍
@@airsoftfantom novritsch has a video doing it on RUclips. The inner barrel usually comes with grease inside to prevent corrosion from transport…, mine had grease inside and there is another guy who did a video on RUclips about same issue 👍
I slapped a tcd mod with a m150 spring and im conskstwntly hitting cans and stuff from at least 60m
Saludos! Es de 0,6mm BBs ó 0,8mm? GRACIAS
Saludos! Eso es un ssg10 estándar con BB estándar de 6 mm. Usé el traductor de Google, así que espero que la traducción sea correcta.
Your poa is right 3 and down 4
With an M220 spring, a stalker piston and a 50 bucking a 70% hit rate at 110 meters is possible.
Sounds great, but such gun will not be allowed at our airosft fields. Do you play airsoft with such setup?
how loud is it? would it need supressor?
I really dont know. Airsoft supressor is definitely needed on short barrel replicas such as mp5k which is loud as hell and supressor helps it much or even on mk18 but my ssg10 does not sound that loud... i have not tried to supress it yet cause i didnt felt it is needed. But many guys run it supressed so maybe it helps...
awesome test！
I bought a1 version and had a LOT of problems with that even send that back for fix XD now a problem is with bucking not want to hop bb more than 80m :(
ouch, sorry to hear that... as you can see my ssg worked pretty well out of box... which BB weight do You use? have you tried to clean it with rubbing alcohol?
@@airsoftfantom 0.45g alot of plastic shards,metal and old black thing was in the barrel, barrel glide ring needs change cuz it came with plastic shards which scratched the cylinder and glide rings, everything cleaned polished, shrinking tube on sprinf guide thick grease on trigger sear spring, works nice but accuracy is meh
@@xxs1lentk1ller30 maybe try tridos tdc to improve accuracy i heard that it performs well😉 glad that the rest of rif works fine now👍
Is ssg10 and modify m24 is a same?
Modify mod24
I am sorry i do not have any experience with modify mod24 so i cant confirm.
The same thing i'm gona do with my Tac41.
Post a link here when it will be online please, i am very curious👍
@@airsoftfantom will do but it's gona be after august as i have Vacation late August and i'm in Bosnia and there i have more than enough space to test out range and accuracy.
which spring you are using?
it is standard configuration from factory. I bought it as 2,8J setting, hence it gives 3,05J with 0,46gBBs. I have not opened it yet, I have no clue which spring is inside.
what scoope is that?
M3 3.5-10x50 replica, 30mm body, manufacturer unknown...
@@airsoftfantom thanks bro
Real accuracy out of box novritsch replica.
???
any question?