How to install detachable tow bar to Skoda Superb II
HTML-код
- Опубликовано: 26 авг 2024
- Step by step tutorial how to install OEM detachable tow bar to Skoda Superb II. Also this video shows how to remove:
- rear mudflaps
- rear bumper
- trunk trims
- interior trims
- bonnet latch
- etc.
Backround music: Science of Silence - Trangens
Awesome tutorial
I was trying to find this whole month
Thank you😄
09:20. Pull this part up after releasing the lower part. Don’t forget to disconnect airbag cable. I would recommend remove negative battery cable. In this case you will not get an error
Velice Děkuji !!!
Very nice video. Congrats for the work and patience put into making it. I have to do this operation on a Superb 3 with an original trailer module. I have now a better idea about where I have to place the module and wiring now. Thank you :)
Super video! Any suggestions on how to remove the heat shield fastener clips without destroying them?
Thank you so much to helped my install the tow bar and assamble the cable till the fuse box.
Why have not you activated “trailer” in engine and esp modules?
I feel like if I did this I’d have 6 left over screws at the end 😂
There are the same with the 4x4 model? I meant for the tow bar
Pěkná práce moc díky
Well don. Svaka cast majstore bravo.
Hi, great tutorial. I’m having issues removing the three disc type bolts on the heat shield. They just seem to spin and not release... cheers Dom
These disc type bolts are quite often in rust and it´s more convenient to break them in opening. Discs are not very expensive and it´s wise to replace them, when opening heat shields.
Hello, just 1 question, the Bk/gr cable (no.8 in Fusebox) doesn`t need to be powered ? like the other 3? I am sure that you do it correctly but i try to understand why it doesn`t need to.
Good job 👏🏼
Great video! This video saved me good money and really got me inspired!
Thank you! Good to hear, that this video is useful for others as well.
great video, gets all the points :)
Hi. Did you also replaced the rear axle coil springs? I saw that are different color code for vehicles with factory trailer hitch.Thank you for your work!
No, I leaved them as is. But as Greenline has quite low height, then its worth to change all springs.
@@lutz6441 OK. Thank you very much!
Why dont show everything?
Thanks a lot!
3 pin 43 44 45 oke and 1 pin take power from fuse panel constant power line Pin 8 fuse 5A ???
Hi Lutz, super video and very useful, I want to make the same process for an Octavia 2012. The process is similar but to conect the electric kit in panel I have somthing difference colors, pleaee help me wit an instalation guide for my car or a link from where to download.
Thanks a lot
Ciprian
Yes, it can be so, that Octavia set is a bit different than Superb, but in general they are the same. I don´t have instructions for you, but you can search it from Briskoda forum, most likely you´ll find some answers over there.
@@lutz6441 Hi Lutz, I made the installation and also on my Octavia 2 FL is totally the same like in your case. I made it in December but now I remembered to give you this feedback. Thanks for your patience to made this video. Have a great day, Greetings from Brasov-Romania
Good to hear, that this tutorial was helpful!
Hi, could you share the details of the long coding of the 69-Trailer module? I've a new module that isn't coded yet and I think that's why my install isn't working (yet I hope!)
Here you go: 01 00 00 02 00 00 00 00
@@lutz6441 thank you for your help with this 11 months ago, your video and reply helped me get the tow bar installed on our Superb
Very good to hear, that this video helped you out!
What/how did you use to get into the coding at the end of video?
Maybe I didn´t understand your question, but I use VCDS version 15.7 for coding.
@@lutz6441 so a normal plug in obd reader?
@@paulshelley4670 Yes, normal OBD reader cable with VCDS software.
Oiii oiii kui asjaliku video sa teinud oled. Viis topelt plussiga. Minu poolne austus sinu suunas🤜nukid🤛🤘🤘🤘😎
Siis on hästi, kui sellest ka teistel kasu on!
No ma just otsisingi seda videot taga ja sain tàpselt selle abi mis mul vaja oli. Suur aitàhh sulle.
@@harraharra6585 Siis on hästi! Soovitan peegli upgrade ka teha, väga mugav on automaatselt lülituvad esituled.