Bonjour de france : Sans discours il courre il courre mais tout est visuel est usuel. Le résultat est sensationnel et ça marche , plus qu'à en prendre de la graine .Merci 💌
Thanks a lot for your explanation ... Where did you find the positive wire ? In the left tail but , wich color is it ? Red also ? Difficult to see that
Ok this is a bit funny but here it goes. Initially I found a thin red wire that gave me a light whenever I turned the ignition on which gave me a reason to believe it's a live wire but it turned out it was not. What I actually found was a wire that powered the left taillight, so whenever the lights were switched on everything would work as intended. Now since the car has automatic lights that get switched on based on day/night sensor, and since I was working inside a garage the whole time, every time I turned on the ignition the lights would automatically turn on as well so everything seemed to be working correctly. It was only a couple days later I figured out what the actual issue was, and it was exactly that, that the trailer socket worked only when the lights were turned on. After that I decided to undo some of the work, and just connect the positive wire directly to the battery. I had more than enough wire to pull it through the side trim (plastic) right to the battery up front, which unfortunately is not in the video. I still believe there's supposed to be a live wire back in the trunk somewhere but at that point I just gave up on finding it and decided to go with the safest route. Anyways, everything works perfect now.
Nessuno ha pensato che la sbarra protezione paraurti rimossa lascia uno spazio vuoto tra paraurti e la Barra del gancio. Nessuno ha pensato che la plastica del paraurti non ha più una base dove appoggiare? Le Conseguenze le capirete da soli dopo un piccolo tamponamento. 😑🫣 Già con la semplice pressione della mano flette parecchio e si sgancia dai supporti che ci sono tra le due parti del paraurti 🙄 Parlo per esperienza perché ho le foto di come si sganciano i supporti tra i due pezzi del paraurti. Tutt'ora sto cercando una soluzione penso la schiuma poliuretanica
When you have LED tail lights these cheap red connectors will not work. And you connect old style 7 port plug. Modern cars use the 13 port plug. If you use these older connectors you get problems on your dashbord.
Thanks a lot for showing how to do this installation. It would be great to see this tow bar in use!
Nice to see how it is done, properly. Thanks. :}
Bonjour de france : Sans discours il courre il courre mais tout est visuel est usuel. Le résultat est sensationnel et ça marche , plus qu'à en prendre de la graine .Merci 💌
was looking exactly for this tutorial, thanks a lot, hopefully not too different on my car
What car u have?
Good job !
I preferred instal a hitch (square). For use a pulling ball.
Thanks a lot for your explanation ... Where did you find the positive wire ? In the left tail but , wich color is it ? Red also ? Difficult to see that
Ok this is a bit funny but here it goes. Initially I found a thin red wire that gave me a light whenever I turned the ignition on which gave me a reason to believe it's a live wire but it turned out it was not. What I actually found was a wire that powered the left taillight, so whenever the lights were switched on everything would work as intended.
Now since the car has automatic lights that get switched on based on day/night sensor, and since I was working inside a garage the whole time, every time I turned on the ignition the lights would automatically turn on as well so everything seemed to be working correctly. It was only a couple days later I figured out what the actual issue was, and it was exactly that, that the trailer socket worked only when the lights were turned on.
After that I decided to undo some of the work, and just connect the positive wire directly to the battery. I had more than enough wire to pull it through the side trim (plastic) right to the battery up front, which unfortunately is not in the video. I still believe there's supposed to be a live wire back in the trunk somewhere but at that point I just gave up on finding it and decided to go with the safest route. Anyways, everything works perfect now.
Hoi,de sigaret aansteker in de kofferbak heeft een constante plus
thank you for de video can you leave link were can i buy sx 4 kit ? ty
Merci pour la vidéo
Whats the max Tow capacity recommend so the car does not struggle?
Google says up to 1200kg. I'm mostly towing lighter things though like motorcycles, tools, materials etc. and the car is not affected at all.
Nessuno ha pensato che la sbarra protezione paraurti rimossa lascia uno spazio vuoto tra paraurti e la Barra del gancio. Nessuno ha pensato che la plastica del paraurti non ha più una base dove appoggiare? Le Conseguenze le capirete da soli dopo un piccolo tamponamento. 😑🫣 Già con la semplice pressione della mano flette parecchio e si sgancia dai supporti che ci sono tra le due parti del paraurti 🙄
Parlo per esperienza perché ho le foto di come si sganciano i supporti tra i due pezzi del paraurti. Tutt'ora sto cercando una soluzione penso la schiuma poliuretanica
Have you got a link for the kits please?
The wiring kit is by Steinhof, there's a link for the manual in the description
Thanks, I mean a link of where I can purchase the tow bar please? Thank you
@@craigeybabe Didn't purchase it over the internet, I bought in in a local car shop in my country
Ok thank you
When you have LED tail lights these cheap red connectors will not work. And you connect old style 7 port plug. Modern cars use the 13 port plug. If you use these older connectors you get problems on your dashbord.
@@Coordinator61 Thanks for the comment, everything works fine though and there's always an option to use an adapter to convert if necessary. Cheers
@@wheelsnutsbolts ok cool i was warned on this with led lights.