Hands down the best Coil On Plug Kit out there. Easy to install. and Durability is just like OEM. Engine Idles smoother. And has more pulling power. 3,000 miles a month and have 30,000 miles on my coil on plug kit in 1 year. and still runs like new.
Burton Racing hooked me up. I sent them my ecu and they installed the COP board and mailed me the harness. The idle is noticeably different. Would not hesitant to buy again.
This is beautiful! Once I found out that the tech was made to do coils to replace dizzy's on B series I always thought about doin it on my B18C swapped hatch. In the past i had so many dizzy issues especially after I installed MSD with external coil which I removed and regret ever doing. Went back to OEM dizzy setup on my chipped P28
@ajeshkamartin318 MSD was MAINLY designed for forced induction applications. The MSD destroyed the dizzy. Specifically, the ignitor. My suggestion is to not do an MSD UNLESS you have a forced induction setup
I have a P28 OBD1 ECU on my B20 block B16 (vtec) head setup and I’m considering buying this kit. I have a few questions. 1.) The only thing that doesn’t come with this kit is the blank distributor cap and the mounting plate for the coil packs correct? 2.) If I have to adjust the base distributor timing, how would I connect a timing light to the coils? Or would I have to set timing permanently before installing the kit? 3.) You mention that the only part of the distributor that is still being used in the cylinder position sensor. Recently my autozone duralast distributor broke up for a split second during acceleration and threw a Code 9 (position sensor). I’m not sure if the sensor was the culprit or if was the ignition parts inside the distributor, but if I have to replace the distributor because my cylinder position sensor fails, would it be difficult to do with this kit installed? Thank you in advanced :)
I was searching for this for a very long time ,love this! ...I have a Honda civic 2000 ex coupe manual..I have a MSD box and external coil can it work with a plugin kit ? I also have a chippedP28 cpu ...tell me what I need and the cost...I Tired buy distributers just bought a new one :( D16y8 motor...
That's pretty amazing..What does that kit run ... I have a b18b built block paired with a pr3-4 head ls vtec.. What would that kit run me?? If you guy are the distributor.. I have a chipped p28 as of now.. my car is boosted if it makes a difference.. thank you for your time
What are the benefits of this swap? I'm genuinely curious. I'm running an all stock D16y8 and am curious if my engine can benefit from this. I drive it daily
I have this kit and have a problem. Showing code 15 in neptune. Vehicle will start but stall immediately. It`s a 1999 crv using original obd2b harness with a odb1 adapter, odb1 P06 chipped ecu.
Absolutely not. Hondata charges $395 and it requires you purchasing another product at $495, so $890 or a standalone ecu is roughly $1,300. Our pricing is the lowest there is and we offer free install and free shipping PLUS we offer coil packs and mounting solutions at competitive pricing as well. Best of all your getting superb customer service and product reliability with every purchase!
I have a 92 vigor, it's a 2.5 5 cyl engine. Will this wok? It's basically a k20 with an extra cylinder. I guess what I'm asking is.. can you make a 5 port harness?
What kind of hp increase on a stock d16, b16, gsr etc..? A 3% increase in power would be realistic with no boost but I would like to see actual numbers to confirm.
I my car run b16a obd 0 ecu from integra first gen... Can my car install this Coil on Plug?? what modified should i done if i want to install this coil pack??
I got a 99 d16y7 Civic bone stock... What would I need to send in for a complete kit or would I need to buy anything or is my ecu applicable.. Just tryna get any sort of upgrades to my card performance so if anyone has any pointers or routes for me to go on or certain parts I should also get to increase power and torque and higher rpm redline.. thanks In advance..
If I have a p28 with hondata s300 already installed, do I still need to install the board that comes with the kit and can I tune the coils in smanager like the hondata kit can?
Yes and yes. Complete information is in the item description on www.burton-racing.com and for any question that you may have that you do not see answered please email us at info@burton-racing.com
Yep, sold many kits throughout those 3 years. We restock as often as possible and still sell out here and there. We just had them in stock for a long while and just recently went out of stock last week. We go above and beyond by offering an email notification when we restock, we highly recommend you to sign up if you keep missing out on restocks as that is quite literally the purpose of the emails.
so for a third of tha price still hav a dizzy and a harness sprout. damn. and not a mega squirt.. or basically a semi squirt, what abt fuel driver board diy b coo
daesyoung the only way to get rid of the distributor is with. $1400 ecu and $600 t1 cam trigger or similar setups in that price range. We are here to offer the same gains for a fraction of the cost. This setup does not control fuel at all, they already have chipped ecu with several tuning platforms to take care of that.
Ryanem1 Yes, just like any other car using a coil pack system you will want to run resistor plugs to help with electrical noise that would cause issues. On the vast majority of late model cars you want to run a resistor plug regardless.
Burton Racing is there any option to run a jumper and possibly get thru emissions, I was thinking no due to the stock ecu and the new coils. Let me know any ideas, AZ emissions aren’t much my 00 accord 2.3 they just plug into obd port and that’s it
It will work with p30 ecu no problem. Please note most p30 ecus come with a knock board, this is removed to install the COP and usually disabled within your tuning parameters/ settings.
Eldo El you can remove your ignitor and icm if you like do install a billet cap but removing anything is not necessary. You will need to retain the cyp (cam position) sensor.
That may be so, but this cop board mounts to the fc1 knock board slot on the ecu which i dont believe your computer has. For more info please feel free to send us an email.
Hands down the best Coil On Plug Kit out there. Easy to install. and Durability is just like OEM. Engine Idles smoother. And has more pulling power. 3,000 miles a month and have 30,000 miles on my coil on plug kit in 1 year. and still runs like new.
Burton Racing hooked me up. I sent them my ecu and they installed the COP board and mailed me the harness. The idle is noticeably different. Would not hesitant to buy again.
How much was it??
The dudes at Burton Racing are stand up guys, everything went smoothly once I received my ecu and coil packs.
This is beautiful! Once I found out that the tech was made to do coils to replace dizzy's on B series I always thought about doin it on my B18C swapped hatch. In the past i had so many dizzy issues especially after I installed MSD with external coil which I removed and regret ever doing. Went back to OEM dizzy setup on my chipped P28
Sorry for the late response lol, why was the MSD bad? I’m reason one asking is cause im thinking abt buying it
@ajeshkamartin318 MSD was MAINLY designed for forced induction applications. The MSD destroyed the dizzy. Specifically, the ignitor. My suggestion is to not do an MSD UNLESS you have a forced induction setup
when you guys restocking? im all about gettin my d16z6 firing right and bypassing the ole dizzy
cop for under a grand.. i wanted this for so long, could never afford it.. this makes me wanna build another honda lol
I have a P28 OBD1 ECU on my B20 block B16 (vtec) head setup and I’m considering buying this kit. I have a few questions.
1.) The only thing that doesn’t come with this kit is the blank distributor cap and the mounting plate for the coil packs correct?
2.) If I have to adjust the base distributor timing, how would I connect a timing light to the coils? Or would I have to set timing permanently before installing the kit?
3.) You mention that the only part of the distributor that is still being used in the cylinder position sensor. Recently my autozone duralast distributor broke up for a split second during acceleration and threw a Code 9 (position sensor). I’m not sure if the sensor was the culprit or if was the ignition parts inside the distributor, but if I have to replace the distributor because my cylinder position sensor fails, would it be difficult to do with this kit installed?
Thank you in advanced :)
I just got everything in the mail cant wait to install it.
How much was it
would for sure get this once the time comes
Very clear explanation. Thanks
Could you run this setup without the distributor and use just a crank sensor? Or does it need a cam and crank correlation?
I was searching for this for a very long time ,love this! ...I have a Honda civic 2000 ex coupe manual..I have a MSD box and external coil can it work with a plugin kit ? I also have a chippedP28 cpu ...tell me what I need and the cost...I Tired buy distributers just bought a new one :( D16y8 motor...
That's pretty amazing..What does that kit run ... I have a b18b built block paired with a pr3-4 head ls vtec.. What would that kit run me?? If you guy are the distributor.. I have a chipped p28 as of now.. my car is boosted if it makes a difference.. thank you for your time
All pricing is available on www.burton-racing.com
Would this affect the car on passing a smog check? I have a 99 civic d16y7 and I’m fitting a miss fire code and would like to know more of this kit
Hello! I have a 1998 Honda Accord 3.0 V6 j30 engine, have a distributor. Have the kit for this car? What’s the cost?
It’s possible to do it with a OBD2 99’ Honda Accord 2.3?
Can you repair motorcycle ignition modules ...
I've got a 1980 Yamaha xs1100. Ignition module no longer available..
73133d1d0bf80aa5b9d7edc7b71a9a8e6e42b8e7
What are the benefits of this swap? I'm genuinely curious. I'm running an all stock D16y8 and am curious if my engine can benefit from this. I drive it daily
robert! good to see you doing things man.
-kris avila
Will you guus have one that works on f22b1???
TStat bolts are more prone to corrosion and a common point for poor ground for the PCM.
What about a mugen spec obd0 pr3 .?
I have this kit and have a problem. Showing code 15 in neptune. Vehicle will start but stall immediately. It`s a 1999 crv using original obd2b harness with a odb1 adapter, odb1 P06 chipped ecu.
Email us or contact us directly to resolve any issues.
So it’s $360 plus shipping for a wire harness and the chip No plugs that’s kind of expensive don’t u think?
Absolutely not. Hondata charges $395 and it requires you purchasing another product at $495, so $890 or a standalone ecu is roughly $1,300. Our pricing is the lowest there is and we offer free install and free shipping PLUS we offer coil packs and mounting solutions at competitive pricing as well. Best of all your getting superb customer service and product reliability with every purchase!
How much is a set ready to go for a 01 integra gsr, it has pigtail obd2 to obd1 with hondata s300
I have a 92 vigor, it's a 2.5 5 cyl engine. Will this wok? It's basically a k20 with an extra cylinder. I guess what I'm asking is.. can you make a 5 port harness?
We can make a custom coil harness but the COP board can not be modified to run the extra cylinder.
Gotta get me this 👌🏽💯
so dope!!! luv it
What kind of hp increase on a stock d16, b16, gsr etc..? A 3% increase in power would be realistic with no boost but I would like to see actual numbers to confirm.
420themachine any car we have taken the time to put on a dyno with this setup was to do a full dyno tune, which by itself will show peak benefits.
I wanted to get a coil on plug setup for a while so I don't have to keep changing the damn distributor all the time
where can i find the information for the Fserie platform?? thanx
No one is asking but what kind of MPG gains do you get on stock engines with a COP set up?
Hi, I have a 94 honda prelude with a F20B swapped.
I need this setup.
Is the a contact info for you.?
What kind of plug would I need for a b20 turbo
What spark plugs should I run on your COP kit
I my car run b16a obd 0 ecu from integra first gen... Can my car install this Coil on Plug?? what modified should i done if i want to install this coil pack??
idzwan S you will need to do an obd1 ecu conversion as the system runs off of an obd1 ecu configuration.
So this is to get rid of the distributer completely and because its more reliable by using ecu since distributer is a moving part?
Hell i love CoPs.
Due to still needing some sensors inside the distributor you can not delete it completely, you can install a low profile cap instead.
oh ok
Can I buy the board in Hungary? I am from Hungary...can you give a hint? Would be greatly appreciated
Email sales@burton-racing.com
Is it possible to produce Hyundai Tucson 2.0 beta engine ecu?
So, how does the ECU determine which is TDC on #1 cylinder? Do the pre 2001 civics have a cam or crank sensor?
Cam position sensor is used for computing firing signals.
@@BurtonRacing thanks. I replaced a coil on the #1 cyl on a 05 civic. Engine purrs now!
If I use this on a stock p28 will I get a knock sensor code since I’m removing the knock board ?
Usdm p28 ecus do not have a knock board. Regardless, our latest revision retains the knock board for complete factory ecu use.
Any change to the Dwell settings in the S300?
Would love to get this done on my G25a
Hi, do you have a package that will work with an AEM v1 ecu instead? I'd like to keep the dizzy for the tacho signal.
Steven Seow please send us an email to burton6431@gmail.com we may be able to build you something.
I got a 99 d16y7 Civic bone stock... What would I need to send in for a complete kit or would I need to buy anything or is my ecu applicable..
Just tryna get any sort of upgrades to my card performance so if anyone has any pointers or routes for me to go on or certain parts I should also get to increase power and torque and higher rpm redline..
thanks In advance..
Best thing to do is convert to an obd1 ecu for more tuning options. Www.burton-racing.com
nice man
Hi have you got a kit for the f20b5 sohc vtec engine thank you 🇬🇧
Our kits are compatible with nearly all cars using the obd1 honda ecu. For more questions feel free to email sales@burton-racing.com
I need to buy a coil on plug kit for my 98 Honda CR-V . Can I use my stock ECU . My stock ECU is 37820-P3F-A54.
You will need to run an obd1 ecu for this conversion.
do you sell the obd1 ecu ready togo an the conversion harness to go to obd2 to obd1.@@BurtonRacing
@@pajero242 please email us sales@burton-racing.com
I’m looking for one coil on plug for my d16y8 civic 1999 thanks please let me know anything thanks
Available on www.burton-racing.com
Thanks so much
Would it work with a aem ecu v.1
If I have a p28 with hondata s300 already installed, do I still need to install the board that comes with the kit and can I tune the coils in smanager like the hondata kit can?
Yes and yes. Complete information is in the item description on www.burton-racing.com and for any question that you may have that you do not see answered please email us at info@burton-racing.com
@@BurtonRacing awesome! Thanks for the quick reply
Can I use coil from k20 into d16z6 ?
You will use d17 coil packs for d16 engines.
There is a link to the ignition coils
So if u hook this up to your dizzy do you still need to set ignition timing with a timing light?
Yes this is correct. Sensors at the lower housing still need to be synced to the engine just as you normally would.
with this, would i still need to run a msd 6al ignition box or is the coil on plug conversion an upgrade?
This is an upgrade in itself. No msd need.
is this guy still on business, It has been 3 years and the webpage still says out of stock???????
Yep, sold many kits throughout those 3 years. We restock as often as possible and still sell out here and there. We just had them in stock for a long while and just recently went out of stock last week. We go above and beyond by offering an email notification when we restock, we highly recommend you to sign up if you keep missing out on restocks as that is quite literally the purpose of the emails.
I’m sold 😍
I need this!
I’m trying to order but your sold out ??
will it work with honda tuning suite ?
Gonna sell my hondata kit for this right now! My Hondata box is having problems!!! Fuck that shit
Shoot us an email, we would be happy to help!
so for a third of tha price still hav a dizzy and a harness sprout. damn. and not a mega squirt.. or basically a semi squirt, what abt fuel driver board diy b coo
daesyoung the only way to get rid of the distributor is with. $1400 ecu and $600 t1 cam trigger or similar setups in that price range. We are here to offer the same gains for a fraction of the cost. This setup does not control fuel at all, they already have chipped ecu with several tuning platforms to take care of that.
Cool 👌
Thanks man
Do you think it's possible to get rid of the distributor all together? What's needed from the distributor to run properly?
Sev Pha at this time no. We still need a sensor signals to the ecu for running conditions.
I think aem sells a block off plate that cuts off the bulk of the distributor
I get rid of the stock dizzy, on factory obd2 ecu too
@@dstorm19 how?
Am in Jamaica how can I get this kit??
Desperately looking for ecu for my turbo d16y8 if you have one for sale I’ll buy it !! Will send a check just let me know please !!!
We have ecus in stock please send us an email to burton6431@gmail.com
Who bought this kit an can give some experience? Slow reaction of the oem honda ecu, or all fine?
We have 100s of customers with this kit any questions feel free to send us an email.
Can I buy the kit in Europe? Hungary maybe?
Email sales@burton-racing.com
How much this cost for everything you offer for h22a ?
Send us an email at burton6431@gmail.com
do you have a complete kit for stock 2001 integra gsr?
Our kit is compatible with cars swapped to an obd1 ecu. We are working on an external model thats compatible with obd2 ecus.
Burton Racing thank you
Do you have to use non resistor type spark plugs?
Ryanem1 Yes, just like any other car using a coil pack system you will want to run resistor plugs to help with electrical noise that would cause issues. On the vast majority of late model cars you want to run a resistor plug regardless.
Is it only for obd1 ecu's or will it work for obd2 as well
OBD1 ecus only, if you have an obd2 car you can run a jumper harness to convert to an obd1 ecu, we stock those as well.
Burton Racing is there any option to run a jumper and possibly get thru emissions, I was thinking no due to the stock ecu and the new coils. Let me know any ideas, AZ emissions aren’t much my 00 accord 2.3 they just plug into obd port and that’s it
We are currently working on a solution to this and we will keep out fans and customers updated.
Hi i want to ask is it possible to use on p30 ecu or it can run on p28 ecu only?
It will work with p30 ecu no problem. Please note most p30 ecus come with a knock board, this is removed to install the COP and usually disabled within your tuning parameters/ settings.
Do you gut the distributor or leave all internals in?
Eldo El you can remove your ignitor and icm if you like do install a billet cap but removing anything is not necessary. You will need to retain the cyp (cam position) sensor.
Burton Racing thank you!!!
Do you do b20 motor
Whats a price on a full h22/f20b kit for this?
Dommy Spec please send us an email and will send you our complete pricing list, thank you.
What about obd2b i have a 98 crv
Hey Robert how much cost this pack sending you my ECU?
is for a Honda civic 92 D16y7 and d16y8 head
Hi Kanjo, please send us an email to burton6431@gmail.com thank you.
Would this work on a obd1 f22a2 engine?
Yes
Do you have coil packs that would work on an LsVtec?
Yes he does
what coil to use for an F series?
Out of stock... when can I order a set?
For restock notifications you can subscribe to our email list on www.burton-racing.com
Does this kit work with obd0? How much if I send my ecu?
Matt Daley you will need to swap over to an obd1 ecu. Please send us an email for all price inquires thank you.
Well shit! Lol I got a s300 in mine so..
That may be so, but this cop board mounts to the fc1 knock board slot on the ecu which i dont believe your computer has. For more info please feel free to send us an email.
What's the average cost for a full kit for b vtec?
master Yang please shoot us an email to burton6431@gmail.com thank you.
Can I connect this to factory 1995 honda civic DX coupe automatic factory non vtec motor ?
How much if I send you my ecu will you do the connections ?
Yes you can all this needs is an obd1 ecu which a 1995 should already have.
So how much if I was to send to you ?
Please send an email to us using the email address in the video description for sales and pricing thank you.
My bad I got it just sent thanks
What about a 1992 honda accord with the F22 engine
Tracy Hill this kit will work, you will however need to be running and obd1 ecu on your car.
F22 needs to be swapped don't blow money on that engine. Go H22 or23
Where can I do it today????
www.burton-racing.com
how do i set ignition timming with this cop set up ?
Vtecing same exact way you would on a stock distributor car.
Will this kit work for h22a4
Angelica Green yes
How much for the kit
Do you have kits for obd0 honda ecu?
Murphy Edwards no sir you would need to convert to an obd1 ecu.
How can I get this kit?
what can be done for f series non vtec and vtec?
Custom brackets can be made, drill and tap valve cover, or studs welded to valve cover. We do have customers running these on F series.
Awesome.
Nice work very helpful .
Bro can send you coil line diagram.
Abu Kawsar can you please shoot us an email and we will discuss any info you might need, thank you.
i have email .
Mdkyser1@gmail.com
Cshionn@gmail.com
Stribue69@gmail.com
Everyone please send me your emails to burton6431@gmail.com my email is also in the description of the video.
How and where do I send my Ecu to you I have a boosted ls vtec
Www.burton-racing.com
Ok thanks I will check it out
It says out of stock online 💔😭
That only works for Honda Do you work with Toyota
Omar Rivera this setup is honda specific sorry. We do not have very much aftermarket Toyota experience at this time.
How much?
Please contact us via the info in the description and we will get back to you asap, thank you.
Where can I buy the set up
www.burton-racing.com
I have a p28 computer that I have to buy to complete dizzy delete