The potential of this fellow if he have the right shop and tools,this is the type of individual that can make a difference and pull his community forward for a better future.
Well not actually a mechanic he destroyed the cvc joints at the end of the axle,did you hear the popping noises when he pulled out and turned right.welded rebar straight to the transmission bolts,removed his clutch and his ability to change or even engage gears by cutting the clutch disc out. But hey it was a cool project,he had some fun and maybe it will last a few weeks. I admire his ingenuity. I think it would have been way cheaper to buy am engine. But I still give him 10 out of 10 for being a great dad. Dad if you read this keep rockin!!!
@@howlinwulfWhy would you need a clutch on an electric motor? I do not even need a clutch to shift once I am moving with a gas engine. Most modern cars have syncro mesh gears. Would take a bit of learning to use the throttle or put sensors on the gear shift that when you go to shift it decreases power to the motor momentarily.
I like your style of filming/editing. You show your intent and then the finished product with minimal how it was done in between. No 10-minute selfies 🙂
Albert Nario:- one of the best EV conversion seen on U tube, you are amazing and know your subject very well, no time waste, *just do it* style, hearty appreciation 👍🏿100likes.
That is genius... Many people have done their own DIY electric car conversions, but I've NEVER seen someone do their own version of regen brakes with the power steering system. That blew my mind! 😄😊 Very well done, fair play 👍 And the noise is so weird, it's like a big remote control car 😝
I think he just converted the power steering system to be electric instead of belt driven. looks like he's manually controlling the motor and only using it when turning, too.
@@javier.villatoro definitely looks like a brake pump, otherwise the brakes would be too stiff for road use since they usually use engine vacuum to soften the brake pedal.
@@dummkompf Pardon the delay in reply, RUclips notifications and all... 😛 Ah I see. So it's a form of engine braking hey. I don't see why it couldn't be used as a regen system though. Very clever stuff.
This pump he took is the power steering pump. It works for now. But it needs to run on oil, it will vacuüm but not for long until it breaks. Internals are made for oil not air.
Yeah, there should be clear distinction between cheap commuter/city car and larger ev, tbh ev industry will probably go to shit thanks to current uses of lithium, and then even projects like this will be unaffordable.
Just found this! This is insane! The level of ingenuity and resourcefulness is mind-blowing! If this guy was able to design EV conversion kits at an commercial level, he would for sure get many buyers
Honestly super impressed by this accomplishment. I had this idea a while back (replace engine but keep gearbox) but haven't got the skills or time yet to take on such a project. This may look slow but for a 2.2kw ~3hp motor this is honestly decent. It's less power than a moped (but more tourque of course) And it still moves the car well. And your skill with a welder to get that motor lined up so well.... honestly I hope I can achieve this skill one day! You have renewed my ambition to explore the field of electric motors. (Regular car mechanic here) The only negative is it sounds like this gearbox could use some fresh oil (or maybe its worn out) a smooth gearbox will maximise the potential from this motor since it isn't powerful. But I look forward to seeing more of this kind of content
I was thinking about the battery, for these modern times is using lithium ion, can we use the 12 volts normal battery since were after the kilowatts probably for about 6 12 volts or more rather, will it last long in running time?
@@bruhmoment802 - I’m still impressed. However lightweight it is, it still looked pretty unwieldy to me. I just bought an engine crane and saved myself the strife.
There are no tech billionaires. They are all carefully selected and given technology to use for profit. In return they have to comply with everything they are asked. We have been seeing it last two years and more to come.
Toma el alternador para usarlo como cargar instantánea del sistema así no tendrás que conectarlo más para que cargue porque se va a ir cargando mientras ruedas de forma más eficiente!!! Estuvo genial tu trabajo sigue así
Amazing job, young man! The conversion you did reminds me that you don't have to start with perfection. Just start! You'll figure it out as you go along! The brake booster was a masterful touch. Add a simple bank of batteries, and off you go. Add more batteries as you can afford it, remembering that to get more power, wire them in series. To get more range, wire them in parallel. For highway speeds, you need at least 144 volts, but if you want a fast car, then you'll need more volts. Initially, the battery pack could be taken out to charge, but soon you'd have to charge insitu. That means an AC to DC inverter. Then you'll need a DC to DC inverter to charge the 12 volt battery from your main battery pack for lights, wipers etc. Then an electric powersteering conversion and eventually an electric a/c system, maybe from a home unit. I'm excited!
This is so great! I really like the minimalist approach to this conversion. That looks like it could work well in your home town. Here in the USA, that car was sold as a Nissan Sentra from about 1992-1994 - most of them are all in junk yards now, sadly.
Lol “Tortilla Motors” Bro for real, amazing job. You’re a talented mechanic and getting that clutch disk to rotate straight with that welded bar, come on bro, awesome. I think i know what you did but many won’t notice how that is tricky And this is a man who knows and understands the components and complexities of a modern day car. He thought of a lot including that brilliant brake booster! Hot damn!
the sound is not bad, Tesla cars legally require them to make noise when driving to alert people of an active moving vehicle because they are too quiet to notice. This one already has it built in :)
Genial😀! Lo único que note que anuló el sistema de embrague, lo que sería muy útil en bajada para no forzar el motor, ahora si esa energía extra se pueda utilizarla para recargar las baterías seria genial, pero no veo ese detalle en este proyecto. Dada las condiciones de los medios en la que se maneja esta persona, tiene mis respetos y admiración.👍☺
Job well done, you have some good skills! The welding with rods between transmission and electric motor is surprisingly accurate, no wobbling or vibration! I wish you could have electric motor with more power.
Absolutely love this. Take older cars, take out the heavy engine/wiring /gas tank/exhaust, and replace it with a motor and batteries (yes, I know they're heavy, it just fills in the weight removed) and make them electric. Since they hardly weigh anything, they don't need large packs, and can charge up quicker, using less energy
But as a results the one thats are already a millionaire will loose out on sales of new cars. Would give somebody lower down on the ladder more chance to get their hands dirty and profit from the scrap recycle value
There are so many people out there that can take us into a new era of less pollution or zero pollution whether or not you believe in climate change we know that big money in the oil and autos have kept any of these Innovative people from surfacing. Hopefully at this time in history these people can rise to the top and bring us into that new era. Keep big money out of it keep the big money out of it and see which direction it goes
Pura ingeniería popular!, A los "ingenieros" les debe estar dando un infarto porque alguien de forma rudimentaria puso en marcha un auto eléctrico. Genial este proyecto!😎
Porque nos daría un infarto? Nosotros tratamos de que todo sea simple y barato, pero al final el dinero manda. A los que les estaría incomodando las conversiones son a las compañías, no a los ingenieros.
Boss Sir 5 star respect... Ang galing po. Kung gagawa ka ng institution na magtuturo ng ganitong coversion im very much willing to attend. More power and God bless.
Gears are used to multiply the torque or speed at a required rpm. Electric motors can give you the same torque at any rpm so using a gear box is unnecessary.
@@ulrichraymond8372 it is unnecessary on big motors but they are perfect for small motors like these because they have a limited RPM range Now you can go faster with just a small motor
Pretty cool and no doubt your a talented MR. RIPLEY, you people can have your electric cars and trucks to save the planet. When the lights go out HOW ARE WE CHARGING ANYTHING without a Gas Motor??
48v with an xt-60 providing all that power, amazing. with at least a 72 volt setup you could bring out the potential of that motor. i hope you see you upgrade this in the future. i've been wanting to make something similar, but it would not be legal to drive where i live.
it is amazing to see this because 48v 2200w motor and 1300kg car with 45kmph speed wow you amazed me ...... from today toward my past days i thought 2.2kw motor can only 5-10kmph speed in 1000kg car but brother dont mind i think i few it will burn because you have given too much load on motor. how i am saying this because motor is making noise in slow speed another i want to see use two bldc 2.2kw motor in V-type ....
The controller is giving a maximum of 50A on the motor, 48v X 50A = 2400W it's safe on the motor even on continuous loading. Also the motor is a in-runner it's cool faster.
@@albertnario4877 yes, i agree that opinion...open area around the "engine"...but what if you must solve a little overheating because of higher voltages and current?...i saw a yt-er making a 5 kw motor what was originally made for third performance...he used a liquid called statorade.
Congrats! This is an amazing job you did. You have my like. I am planning to convert my boat to electric home made of course and in time also a car. Again congrats and keep up the amazing work!👏
I just can't stop thinking about wha this guy can do with with new tools and technology But this is the interesting thing of this watch people so talented Good job don't stop doing what you doing
i am impressed, one thing got me confused, what is the gear shifting for aside from reverse and forward, i think i saw you shifting gear while driving and with no clutch. 🤔
I love that he reused so much to make it absolutely love it!!! Major props brother!!! Super impressed!!! Tesla @ElonMusk needs to hire this guy for real!!!
Sir this is an awesome project. I think this will the best solution to the rising cost of Gasoline and Petroleum products. How much does your project cost? Where is your location? I'm also planning to convert my old Nissan Sentra to electric.
Muito bom perfeito gostei e vou fazer na minha picape 1966 ...🇧🇷🇧🇷🇧🇷🇧🇷👍👍👏👏👏👏👏👏☝🤗...uma dica instalar um carregador de baterias conjugado com o motor usando um inversor ...assim rodando ele próprio se carrega as baterias ..
How much is the total cost of the project and where can I buy those materials? ( electric motor etc.). 🤔 perfect to revive our owner type jeep. Was that in the Philippines?
Wonderful. Almost perfect. It's just the noise from the motor left to work on. But how do you keep the battery charged. I did not notice your ch to charging system.
This guy is very useful if we go back to Stone Age. Come on guys I was not expecting these type of comments. we should help him in on thing, to focus on doing the right things for the right job.
Dude lmao I am speechless!!!!!!!; I'm here like man he has his hand on the shifter for fun, that thing don't... *upshifts* OHHHH MYYYY GOOOSSDDDDDDDD!!!!!!!!!!!!!!!!!!!!!!
1:50 Amazing alignment of the clutch centre. It spins perfectly true! Good job!
That alone was impressive
^ 100%, with minimal tools its very impressive.
It was centered on a pipe im sure. It's not too difficult without a lathe.
@@andrewchristiansen8311 Ah, thank you- excellent point and probably rings true
Yeap how the fuuuuuck
The potential of this fellow if he have the right shop and tools,this is the type of individual that can make a difference and pull his community forward for a better future.
I'm loving this man's tech know-how and ingenuity to pull this off. He's both a mechanic, an electrician, a welder plus other things all in one. Wow.
... foot model
genius
Well not actually a mechanic he destroyed the cvc joints at the end of the axle,did you hear the popping noises when he pulled out and turned right.welded rebar straight to the transmission bolts,removed his clutch and his ability to change or even engage gears by cutting the clutch disc out.
But hey it was a cool project,he had some fun and maybe it will last a few weeks.
I admire his ingenuity.
I think it would have been way cheaper to buy am engine.
But I still give him 10 out of 10 for being a great dad.
Dad if you read this keep rockin!!!
@@howlinwulfWhy would you need a clutch on an electric motor? I do not even need a clutch to shift once I am moving with a gas engine. Most modern cars have syncro mesh gears. Would take a bit of learning to use the throttle or put sensors on the gear shift that when you go to shift it decreases power to the motor momentarily.
I just can't believe he's using an e-bike controller and tiny battery pack to move a car....
I like your style of filming/editing. You show your intent and then the finished product with minimal how it was done in between. No 10-minute selfies 🙂
Don’t forget to like and subscribe! 😁
Agree. No 10-min selfies or whatsoever in this vid ... Straight to the point. No talk, action :D
When this buddy pulls out the Engine himself. I knew he can do it 🙌🏼 earned my respect 👌🏼🔥❤️
❤️ From Bangladesh 🇧🇩
eeeehh bangla! cheers!
@@fribiesdi hehehe yes.
Same. Dudes just standing IN the engine bay in his flip flops hauling the engine out with an old seat belt 😂 that was my favorite part
This is by far the best EV build video i've seen. Kudos to the frugality and the results are just Awesome !
I bet nobody can make a cheaper conversion especially in DIY style!
bro this was awesome, i need to start my own business in this after university. This man has MAD skills and is a modern man for his time!
Albert Nario:- one of the best EV conversion seen on U tube, you are amazing and know your subject very well, no time waste, *just do it* style, hearty appreciation 👍🏿100likes.
That is genius... Many people have done their own DIY electric car conversions, but I've NEVER seen someone do their own version of regen brakes with the power steering system. That blew my mind! 😄😊
Very well done, fair play 👍
And the noise is so weird, it's like a big remote control car 😝
I think he just converted the power steering system to be electric instead of belt driven. looks like he's manually controlling the motor and only using it when turning, too.
@@dummkompf Actually that motor is for the brake booster, if you see it only activated when pressing the pedal brake.
@@javier.villatoro definitely looks like a brake pump, otherwise the brakes would be too stiff for road use since they usually use engine vacuum to soften the brake pedal.
@@dummkompf Pardon the delay in reply, RUclips notifications and all... 😛
Ah I see. So it's a form of engine braking hey. I don't see why it couldn't be used as a regen system though. Very clever stuff.
This pump he took is the power steering pump. It works for now. But it needs to run on oil, it will vacuüm but not for long until it breaks. Internals are made for oil not air.
Bro this is insane. Just imagine if he had the resources to actually do it on a much nicer scale
Yeah, there should be clear distinction between cheap commuter/city car and larger ev, tbh ev industry will probably go to shit thanks to current uses of lithium, and then even projects like this will be unaffordable.
@гопник garbage, that's what we are, as humanity.
Yes yes it's a Tesla . @elonmusk
@@LegalizaLaMaruja except not costing you $72,000
@гопник what if Cambry was running that show?... not Jerry Rig .. haha he is just the muscle
This might be the biggest project you've done yet, literally. Awesome stuff right off the bat.
It amazes me how amazing things can be built with simple tools. I'd love to see what people like you can do with lots of funds behind you
Excellent work. I would love the combination of electric torque and shifting gears. Those early 90's Nissans had a great-looking body style.
Just found this! This is insane! The level of ingenuity and resourcefulness is mind-blowing! If this guy was able to design EV conversion kits at an commercial level, he would for sure get many buyers
Freakin awesome job centering the output gear to the sprocket, especially With that design. Impressive!
I was shocked when I saw how nice the fit was. I certainly couldn't center it by eye and stick weld it that perfectly.
You think he is the first guy to do this? people have been doing this for years dude.
@@edstar83 nobody asked you lol
@@Phil_Jumaa Just like noone asked you?
@God's Final Warning The OP changed his comment.
Pare ang galing mo. This is the first electric stick shift car in the world.
Well done. You ought to get an award for innovation. "Do what you can with what you have where you are". Theodore Roosevelt
Really nice and simple conversion with no frills! Loving the battery pack in the passenger seat
You gave me more reason to love and
keep my favorite ST191 1996 car.....Thank you for the peace of mind bro...God Bless you
You know this will be the future. Mad max😄👍
Honestly super impressed by this accomplishment. I had this idea a while back (replace engine but keep gearbox) but haven't got the skills or time yet to take on such a project. This may look slow but for a 2.2kw ~3hp motor this is honestly decent. It's less power than a moped (but more tourque of course)
And it still moves the car well. And your skill with a welder to get that motor lined up so well.... honestly I hope I can achieve this skill one day!
You have renewed my ambition to explore the field of electric motors. (Regular car mechanic here)
The only negative is it sounds like this gearbox could use some fresh oil (or maybe its worn out) a smooth gearbox will maximise the potential from this motor since it isn't powerful.
But I look forward to seeing more of this kind of content
I was thinking about the battery, for these modern times is using lithium ion, can we use the 12 volts normal battery since were after the kilowatts probably for about 6 12 volts or more rather, will it last long in running time?
I just got the car from the junk yard.. in my experience you need at least 5kw motor to make a decent speed on it.
@@albertnario4877 may I know whats the wattage of your motor? Thx
A CVT, I suspect, would perform suitably in this application.
@@alphasiera1757 Are you blind? look in the description and you will find it is 2.2Kw meaning 2200w. Omg!!!😐
woowww ..... you are GENIUS.....future. ELCTRIC CAR INNOVATOR/INVENTOR here in the Philippines...
this guy is a one man army..
he pulled that engine on his own
IN fkn sandals!!!
Yeah, that impressed me too. I’m swapping an engine at the moment and even getting the new one off the pallet nearly killed me!
That GA16 is pretty lightweight, you can Carry it easily with 2 people, but Man just one person trying to lift it is impressive
@@bruhmoment802 - I’m still impressed. However lightweight it is, it still looked pretty unwieldy to me. I just bought an engine crane and saved myself the strife.
Its a tiny engine...
Your fabrication skills are VERY impressive!
Napaka gandang proyekto ikalat sa fb at magtayo ng shop para marami tao magpagawa bro at cguradong uunlad ka at nakakatulong sa kalikasan.👍😊
haha nice translation, thanks. 😁
This is a work in progress!
Lots of improvements in progress. This lad deserves 👏. The future looks promising!!!😊
If we must have tech billionaires, let's make this guy the next one!
They won't Jelousy is boiling " world wide or angers their faith to see good guys winning!..
Don't worry he won't be that like many others who rebuild ice to el.vehicle
There are no tech billionaires. They are all carefully selected and given technology to use for profit. In return they have to comply with everything they are asked. We have been seeing it last two years and more to come.
It's impossible to move a car with a so small battery ! For me it's just a fake video.
@@igory8698 I have heard this before and it makes sense... proof?
Toma el alternador para usarlo como cargar instantánea del sistema así no tendrás que conectarlo más para que cargue porque se va a ir cargando mientras ruedas de forma más eficiente!!! Estuvo genial tu trabajo sigue así
Really cool. Whit 72v or 80v battery it probably would go past 60km/h. Wery nice project man :)
I'm going to remove the gear of the motor and add another in the future
pls give that car a 220v battery it deserves it
Amazing job, young man! The conversion you did reminds me that you don't have to start with perfection. Just start! You'll figure it out as you go along! The brake booster was a masterful touch. Add a simple bank of batteries, and off you go. Add more batteries as you can afford it, remembering that to get more power, wire them in series. To get more range, wire them in parallel. For highway speeds, you need at least 144 volts, but if you want a fast car, then you'll need more volts. Initially, the battery pack could be taken out to charge, but soon you'd have to charge insitu. That means an AC to DC inverter. Then you'll need a DC to DC inverter to charge the 12 volt battery from your main battery pack for lights, wipers etc. Then an electric powersteering conversion and eventually an electric a/c system, maybe from a home unit. I'm excited!
This is so great! I really like the minimalist approach to this conversion. That looks like it could work well in your home town. Here in the USA, that car was sold as a Nissan Sentra from about 1992-1994 - most of them are all in junk yards now, sadly.
Crushed by cash for clunkers a program that hurt low income families who can't afford new cars..
Common sense doesn't seem to work in the US either bc you critically need some.
What can absolutely be duplicated anywhere which is science
thanks i was just about to ask what car is that...looks very much like audi 80 from 1994
@@kirdot2011 the description said nissan sentra 91, nissan sentra is still pretty common here in the philippines
Lol “Tortilla Motors”
Bro for real, amazing job. You’re a talented mechanic and getting that clutch disk to rotate straight with that welded bar, come on bro, awesome. I think i know what you did but many won’t notice how that is tricky
And this is a man who knows and understands the components and complexities of a modern day car. He thought of a lot including that brilliant brake booster! Hot damn!
Electric car with manual box 😍😍 I'd literally buy an electric car if it was like this
your very good hope one day you can have your own car company love your car
Good job brother..very inspirational..in now time the era of car eletric..i'm sure many people will try your conversion way.
No
My congratulations. Great job. Did you know you are a genius...
Excellent idea this is giving me some incentive to get the 86 4Runner to run on electric. Thank you for the value of your time.
WOW! This is super fast for 48V !!! RESPECT! please more detailed builds :D
Aside from it sounding like a toy car, this is freakin awesome!!!
the sound is not bad, Tesla cars legally require them to make noise when driving to alert people of an active moving vehicle because they are too quiet to notice. This one already has it built in :)
Genial😀! Lo único que note que anuló el sistema de embrague, lo que sería muy útil en bajada para no forzar el motor, ahora si esa energía extra se pueda utilizarla para recargar las baterías seria genial, pero no veo ese detalle en este proyecto. Dada las condiciones de los medios en la que se maneja esta persona, tiene mis respetos y admiración.👍☺
Job well done, you have some good skills! The welding with rods between transmission and electric motor is surprisingly accurate, no wobbling or vibration!
I wish you could have electric motor with more power.
thanks, maybe soon i got enough budget to get one.. 😁
WOW! That clutch disc weld is BALANCED! I've bought machine made parts from the store that weren't that perfect!
Absolutely love this. Take older cars, take out the heavy engine/wiring /gas tank/exhaust, and replace it with a motor and batteries (yes, I know they're heavy, it just fills in the weight removed) and make them electric. Since they hardly weigh anything, they don't need large packs, and can charge up quicker, using less energy
But as a results the one thats are already a millionaire will loose out on sales of new cars.
Would give somebody lower down on the ladder more chance to get their hands dirty and profit from the scrap recycle value
Wrong, it causes a osha death trap around familys
Why not just adapt the old engines to hydrogen? Less efficient but more speed and more power with no batteries
@@mattbanks3517 you seriously think there are hydrogen stations where he is?
@@RazoE make the hydrogen at home with a basic electrolyzer
There are so many people out there that can take us into a new era of less pollution or zero pollution whether or not you believe in climate change we know that big money in the oil and autos have kept any of these Innovative people from surfacing. Hopefully at this time in history these people can rise to the top and bring us into that new era. Keep big money out of it keep the big money out of it and see which direction it goes
Pura ingeniería popular!, A los "ingenieros" les debe estar dando un infarto porque alguien de forma rudimentaria puso en marcha un auto eléctrico. Genial este proyecto!😎
¿Infarto? La gente lleva haciendo estás conversiones por décadas, en esto vídeo no se está haciendo nada que no se haga a diario en todos lados.
Porque nos daría un infarto? Nosotros tratamos de que todo sea simple y barato, pero al final el dinero manda. A los que les estaría incomodando las conversiones son a las compañías, no a los ingenieros.
I'm impressed with your skills. Give this guy a welder and angle grinder, and there is nothing he can't do!
Very interesting project. Can still the gear lever be used to change gears?
yes
Good DIY project bro.. proof of concept. saludo ako sa yo.. hope you get funding for any real commercial projects!!! Good luck..
Parabéns pelo projeto e pelo vídeo. Também tenho desejo de fazer algo parecido.
Boss Sir 5 star respect... Ang galing po. Kung gagawa ka ng institution na magtuturo ng ganitong coversion im very much willing to attend. More power and God bless.
That's something i always wanted to do. Just watching this really interesting to see a man build it by himself.🙌 Maybe I'll give a try someday.
I would have appreciated if you showed how you lined up the clutch disk with that sprocket so dead perfect
Nice build. Impressed that you got the clutch adapter centered. If you use a FOC controller the motor will be much quieter.
Now that's pretty impressive using something that was sitting there and now it's back to life 👍
Congraduation from Russia! Increase voltage
and try controller with 4000W or more.
dislike bec. of putin.
@@TequilaMario I am hate Putin!
@@АлексейПетрозаводск I take de dislike back.
@@TequilaMario Thank You! Stop war!!!
Greetings from Finland. Hope we can yet again be friends and brothers.
Wow ...46kph it's not bad... brilliant idea 💡
Cheapest conversion I've ever seen...so far...
how did the power steering work without the pump? @ 11:55 , there's no power steering? looks like a struggle to turn
nice work anyway 👍👏
I have always wondered why dont car manufacturers use gearbox such as CVT or even a manual one like this one. Well done
Gears are used to multiply the torque or speed at a required rpm. Electric motors can give you the same torque at any rpm so using a gear box is unnecessary.
Maybe for example: More expensive, less efficient and major of ppl wants auto
A few electric cars have 2 gears or so. But the reason is they just don't need them.
Especially not a rubber band device sapping loads of power!
CVTs are cheap and hot garbage, they barely last for any normal application in a weak engined car
@@ulrichraymond8372 it is unnecessary on big motors but they are perfect for small motors like these because they have a limited RPM range
Now you can go faster with just a small motor
Pretty cool and no doubt your a talented MR. RIPLEY, you people can have your electric cars and trucks to save the planet. When the lights go out HOW ARE WE CHARGING ANYTHING without a Gas Motor??
Simple and impressive! but aren't those welds too weak?
i observed it too but very nice project
48v with an xt-60 providing all that power, amazing. with at least a 72 volt setup you could bring out the potential of that motor. i hope you see you upgrade this in the future. i've been wanting to make something similar, but it would not be legal to drive where i live.
it is amazing to see this because 48v 2200w motor and 1300kg car with 45kmph speed wow
you amazed me ......
from today toward my past days i thought 2.2kw motor can only 5-10kmph speed in 1000kg car
but brother dont mind i think i few it will burn because you have given too much load on motor. how i am saying this because motor is making noise in slow speed
another i want to see
use two bldc 2.2kw motor in V-type ....
The controller is giving a maximum of 50A on the motor, 48v X 50A = 2400W it's safe on the motor even on continuous loading. Also the motor is a in-runner it's cool faster.
@@albertnario4877 yes, i agree that opinion...open area around the "engine"...but what if you must solve a little overheating because of higher voltages and current?...i saw a yt-er making a 5 kw motor what was originally made for third performance...he used a liquid called statorade.
@@albertnario4877 if you can do this it will be grateful for me, make a video of twin bldc motor in a V-type in this nissan
you can put as many motors and batteries you want as long as you have the $$$$
Luh! ginawa mo sir na electric car yan?! wow. ang galing!
thanks for the fantastic build video, learned so much!
Mind blowing he got good alignment of the motor drive shaft.
Congrats! This is an amazing job you did. You have my like. I am planning to convert my boat to electric home made of course and in time also a car. Again congrats and keep up the amazing work!👏
I just can't stop thinking about wha this guy can do with with new tools and technology
But this is the interesting thing of this watch people so talented
Good job don't stop doing what you doing
Thats great, but how long does the battery last?
I think he made it self charging
@@azzeddineelouadi yes sure LMAO
in my current charger it takes 18hrs
i am impressed, one thing got me confused, what is the gear shifting for aside from reverse and forward, i think i saw you shifting gear while driving and with no clutch. 🤔
Woah 45kmph on the flat is a lot more than I expected from that little motor.
kph
😂😂😂😂 the sounds it makes is so funny
i had to edit cuz my comment sounded hateful, im not, am actually impressed :D.
Where did you buy the electrical motor kit & was it expensive 👍😁
I just saw it on an online store, i think usd300 on motor and usd90 on controller
It always amazes me the projects people can achieve working in a dirt floor workshop with a few basic tools.
I love that he reused so much to make it absolutely love it!!! Major props brother!!! Super impressed!!! Tesla @ElonMusk needs to hire this guy for real!!!
He needs to put Muck out of business.
#KMJS na yan bro, Galing mo wag ka sanang papadala sa mga ganid na negosyante dito sa atin.. 🇵🇭
Wait, how did you balance that sprocket so easily??
Clutch platetto gearbox? Yeah I wondered that.
This is beyond excellent ingenuity. Great video.
we need more people like you!
@8:18 you hold up a sprocket with screws to hold it fast. how did you find that ? what measurements/data did you use to pick that exact sprocket ?
Sir this is an awesome project. I think this will the best solution to the rising cost of Gasoline and Petroleum products. How much does your project cost? Where is your location? I'm also planning to convert my old Nissan Sentra to electric.
yung motor nasa 15k pero kung merong motor n at least 5kw mas maganda.
@@albertnario4877 medjo kulang yung torque? na equivalent sa gas atleast.
Boss kung may 5kw motor ka na nahanap, pa heads up naman. Hahah! Trying to build din po
Muito bom perfeito gostei e vou fazer na minha picape 1966 ...🇧🇷🇧🇷🇧🇷🇧🇷👍👍👏👏👏👏👏👏☝🤗...uma dica instalar um carregador de baterias conjugado com o motor usando um inversor ...assim rodando ele próprio se carrega as baterias ..
Bro it’s the best conversion I ever seen, congratulations to your bro, it’s pretty cool 😎 😊
I would love to see this get so many views that he can buy a fully decked out workshop
A manual transmission car Gen-Z can't even stall out. Great Job man!
Well done 👍
Looking to do something similar myself soon great work 😎
Love the Mad Max, just make it work engineering! Well done.
lo hubieras dejado con su motor original son bien silenciosos y trabajan perfecto y económico
You should share this with Nissan Motors ! I’m sure they would be impressed!! Well done 👍🏻
Likee fom Brasil 🇧🇷🇧🇷🇧🇷 projeto relativamente simples porém top , qual o custo da conversão ?
Uns 50 mil bozocoins
How fast can you go and how far...what's the distance before you gave to charge up....or use solar panels...as well.....
Professional work.
I'm also doing this soon
How much is the total cost of the project and where can I buy those materials? ( electric motor etc.). 🤔 perfect to revive our owner type jeep. Was that in the Philippines?
Well done brother man. Thanks for being crafty out there. 😊🌎✨
Ok my questions how is is going to cool the battery down and how’s the rest of the electric components on the car getting juice like headlights ?
The build is amazing. However I am not so comfortable with those lithium ion battery pack, they explode. Use Lithium Iron Phosphate instead.
Explode? Alla akbro boom 💥
@@nudewpriya7613 Crusader for Paul!!
yes youre right!!
@@fidelcatsro6948 No. Old ugly nabi for baby ayesha💕
Wonderful. Almost perfect. It's just the noise from the motor left to work on.
But how do you keep the battery charged. I did not notice your ch to charging system.
Great job. Tesla better watch out.
it's far from it 😆
Elon Musk left the chat...
wow, all I want to know is how long did it run before the battery died.
This guy is very useful if we go back to Stone Age. Come on guys I was not expecting these type of comments. we should help him in on thing, to focus on doing the right things for the right job.
Dude lmao I am speechless!!!!!!!; I'm here like man he has his hand on the shifter for fun, that thing don't... *upshifts* OHHHH MYYYY GOOOSSDDDDDDDD!!!!!!!!!!!!!!!!!!!!!!
haha, maybe next time I include the gearshift video 😅
@@albertnario4877 Yes ! Please ! lol