I have this same problem on a 2003 Forrester. The solenoid was cycling like crazy making a nasty buzzing noise. CEL on, Transmission Temperature Light flashing. Removed the pan, replaced the solenoid, noise went away, CEL didn't TTL still flashing. I removed the pan again and found this video. Both the new and old solenoids ohm out at 3.6 Ohms. I'm kinda at a loss.
Hi Gary I have 2010 gt legacy with a 5eat automatic the valvebody range switch not working the valvebody works perfect same with auto itself it the range switch on the side or neutral/switch now sit inside with the valvebody in the oil all the older one used sit out side easy fix my problem I can't buy new range switch to tell the tc module prnd to stop going into limp mode my question is can I buy this range switch or can you buy this range switch separate I've had no luck anywhere thanks terry from Australia love to know your thourts on this 🤔 great video and content thank you
I didn't change the atf fluid of the my automatic transmission yet because i didn't have time for this.I may have forgot to change the atf fluid every 30k miles.That was negligence on my part.I don't know anyone here in Los Angeles that's specializing in automatic transmission.
i got this code reading with my car today, mechanic recommend solenoid valve replacement and atf flushing? my car have shift delay response and jerks a lot when shifting gears like from D to R or N to R. the R gear has the hardest jerk
That would make sense. The shift solenoids help direct fluid to make the shifts. They are designed to have high pressure in case of a failure so the shifts will be hard until the solenoid is fixed.
Wow a not a full rebuild video from Gary, I didn't know those existed😊... quick question Gary, which bushing kit do you prefer for 6HP, sonnex, omega or durabond? Also I remember you saying you only use Zf frictions not Raybestos or any other brand is that correct?
Gary i have a ram van 2014 w/92000 the book says to change trans every 10y or 120000 miles i checked the fluid its red looks good when should i change? it if i do should i just drop the pan or drain all 9q
It will be the some for subaru legacy outback 1999 .EJ 25. 2.5 engine. I have the some code on my car..if is the some please let me know sir.thank you so much. This is my frist car in my life.i really love this car
Hi Gary.My wife's car is a 2009 Land Rover LR3 equipped with the zf6hp26 automatic transmission.She should change the atf fluid but she forgot to change it every 30k miles because of that the automatic transmission broke.So i hope you don't mind if i ask you how much do you charge to make the diagnose? There isn't any ABS,electronic fuel inject or body failure that interferes in the automatic transmission's operation.
i have a 2006 chysler 300 my transmission doing the same my first transmission i had in giving codes about input/shaft (i change speed senser) and it would nt still change gears so i change out transmission (used) its hitting hard( a little )as i cycle threw gears it want change out either as am driving giving codes p7048 and p700 do anyone kno the problem
Yes sir i used a scan tool it say it may be a relay shut off something like that ....I don't kno sir with another transmission and it's doing same thing that's weird but I agree it my be electrical
I have this same problem on a 2003 Forrester. The solenoid was cycling like crazy making a nasty buzzing noise. CEL on, Transmission Temperature Light flashing. Removed the pan, replaced the solenoid, noise went away, CEL didn't TTL still flashing. I removed the pan again and found this video. Both the new and old solenoids ohm out at 3.6 Ohms. I'm kinda at a loss.
If the light is flashing, have it scanned for codes
@@GaryFerraro same code. P0748
Hi Gary I have 2010 gt legacy with a
5eat automatic the valvebody range switch not working the valvebody works perfect same with auto itself it the range switch on the side or neutral/switch now sit inside with the valvebody in the oil all the older one used sit out side easy fix my problem I can't buy new range switch to tell the tc module prnd to stop going into limp mode my question is can I buy this range switch or can you buy this range switch separate I've had no luck anywhere thanks terry from Australia love to know your thourts on this 🤔 great video and content thank you
I didn't change the atf fluid of the my automatic transmission yet because i didn't have time for this.I may have forgot to change the atf fluid every 30k miles.That was negligence on my part.I don't know anyone here in Los Angeles that's specializing in automatic transmission.
i got this code reading with my car today, mechanic recommend solenoid valve replacement and atf flushing? my car have shift delay response and jerks a lot when shifting gears like from D to R or N to R. the R gear has the hardest jerk
What kind of car do you have?
That would make sense. The shift solenoids help direct fluid to make the shifts. They are designed to have high pressure in case of a failure so the shifts will be hard until the solenoid is fixed.
Something a little different Gary. Good info.
Wow a not a full rebuild video from Gary, I didn't know those existed😊... quick question Gary, which bushing kit do you prefer for 6HP, sonnex, omega or durabond? Also I remember you saying you only use Zf frictions not Raybestos or any other brand is that correct?
I like durabond, if i can't get then sonnax, yes i like to use ZF frictions
Gary i have a ram van 2014 w/92000 the book says to change trans every 10y or 120000 miles
i checked the fluid its red looks good
when should i change? it if i do should i just drop the pan or drain all 9q
Do you know what trans you have? Do you have a Dipstick?
@@GaryFerraro no dip stick 3.6 v6 this is minivan but considered commercial {ram cv tradesman) can get number's
It will be the some for subaru legacy outback 1999 .EJ 25. 2.5 engine. I have the some code on my car..if is the some please let me know sir.thank you so much. This is my frist car in my life.i really love this car
Hi Gary.My wife's car is a 2009 Land Rover LR3 equipped with the zf6hp26 automatic transmission.She should change the atf fluid but she forgot to change it every 30k miles because of that the automatic transmission broke.So i hope you don't mind if i ask you how much do you charge to make the diagnose? There isn't any ABS,electronic fuel inject or body failure that interferes in the automatic transmission's operation.
Now a days if you have a speed sensor code it very well could effect the way the transmission operates, Are there any codes?
@@GaryFerraro Yes but i forgot.kk
@@GaryFerraro What more i need to do? I can't find any workshop specializing in automatic transmission here in Los Angeles.
@@mikepittsburg6939 So you need transmissions in both your cars?
@@GaryFerraro Yes.So what should i do?
i have a 2006 chysler 300 my transmission doing the same my first transmission i had in giving codes about input/shaft (i change speed senser) and it would nt still change gears so i change out transmission (used) its hitting hard( a little )as i cycle threw gears it want change out either as am driving giving codes p7048 and p700 do anyone kno the problem
That is electrical code, If you clear, does it come right back?
Yes sir i used a scan tool it say it may be a relay shut off something like that ....I don't kno sir with another transmission and it's doing same thing that's weird but I agree it my be electrical
If different trans doing the same thing, have to look outside the box, probably either a wire or Tcm problem@@Bigkev47
Yes sir I will try another tcm and check wires also do I need to reprogram the tcm that I buy from the junkyard
I honestly do not think a program is needed, I dont believe so@@Bigkev47