Which PTZ joystick controller has HDMI output that you can easily pick the video that comes in via the ethernet sent from the PTZ camera itself? I am asking this because, i don't want to connect long hdmi cable to the PTZ camera into my video swicther but rather user one ethernet cable to power the camera and also receive receive video from it into the Joyticker controller and then connect the HDMI output from the joystick controller to my video switcher for live streaming.
Good idea but I don’t know any. Few suggestions maybe you should look for a switcher that has ptz control capabilities 🤔 but what can be helpful for you is to just use Ethernet to power and IP control with joystick and use NDI over the same cable to send the signal to your PC for live streaming. So no HDMI need just one able to do it all.
@LiveProductionTips Yeah, you are right. I have been thinking over this. It dropped in mind that the best will be to use OSEE GOSTREAM DECK, which has NDI capability, though we may not be able to control the camera but can receive a video from it.
@@ebentechstudio that’s an idea. Or you could use any joystick to control the camera and skip the switcher. Go directly to the PC because you are able to receive NDI sources into your pc. As long as it’s not too many ( because your Pc may suffer ).
Hello. Im trying to set up my controller but it is not turning on when connected to power supply adaptor and by POE. Do you have any idea about this one?
I would love a set up video I’ve had this controller for months but never used it because I couldn’t get it to communicate over ip to my camera for control.
I was looking forward to using this PTZ controller but I kept getting blackouts when it was connect to my church's Atem Mini Pro. After an unsuccessful attempt to reach the company for support I returned it. Hope you have a better experience.
Thanks for your feedback. We have been using it in the church that I ordered for, it’s been working no issues. Also we didn’t have any issues connecting cameras, although you need to have a bit of knowledge on how to deal with IP Adresses. Did you buy another brand?
You are welcome. If you check my description there is a link to amazon listing. You will find all the dimensions and other details about the controller
Hello My Name is Sam, we have the same controller your talking about but kind hard to set it up with our PoE to Communicate with our 2 PTZ cameras FAMAKO and AVKANS Please is it Possible to do a Video on The HSILITY CONTROLLER with the screen on how tro connect to the network how you did yours. Thank you. there no video on youtube explaining how to set it up.Thank you and remain Blessed Amen !
Can you do a video on how to set patrol preset, zone preset, set pattern, and call patrol & pattern, thanks, I have the same controller no instruction on how to do this, I can set the presets positions, just don't know how to transition from one point to another with the presets with the zone or pattern presets
Hello! I have a brand new AVIPAS AV-1081W and when I try to connect to my PTZ controller (LEFTEK S3) over the Ethernet cable and I am unsuccessful because when I enter 192.168.5.163 on Google chrome it lets me login, but gives me an error message saying UPDATE. I have nothing to UPDATE because when I click on UPDATE button it does not work at all and I have searched on Google for help and I cannot find anything. Please advise me on what to do
I have never used the AVIPAS AV-1081W, you need to make sure it is compatible with the S3, some cameras may not support the S3 protocol (on-vif) check your camera may be using Visca Protocol
@@LiveProductionTips It was working for three months then I turned it off while I was trying to place the camera on another location. When turned it on it was not detecting. First time it was not on internet, but I was using ethernet without internet
You can use any capture card (HDMI to USB) and connect the camera using an HDMI cable , and the controller will help you control the camera. I hope I answered your question right
Hi I enjoyed and appreciate all your informative videos. Because of your videos I purchased this machine along with two 30x zoom AVKANS PTZ for my church and they are lovely. I'm also planning on getting the AVKANS tracking camera as well. Thing is that I don’t know if I'll be able to control the auto tracking from this controller. Can you inform me on this? Thank much.
Hello Carlton, I am glad you found my vids helpful. It’s also awesome to know you built a full setup and you are happy with it. As for the Avkans Auto tracking camera I will look it up but I don’t see any reason why It wouldn’t work with the controller because they use the same protocol
@@dgreene3209 sure. Here is the link for the ball head: amzn.to/3wYEbGu For the light stand you can use any light stand I actually use what I already had from my lights since I don’t use them every day
Hello I have the same controller for my PTZ camera and i am having a bit of an issue i am looking tofix if possible you are able to help me. It has been working just fine for almost 1 year now and i like the quality but now i am noticing that for some reason it sometimes disconnects from the IP and the screen turns black and i cannot control the camera. When that happens i am still able to see the camera in my preview monitor but in on the PTZ controller. I usually have to wait til the controller connects back to the IP or i do a search of the IP and connect to it again but then after a while it disconnects again. I don't know why it's doint this or what's causing the controller to do this. Could it be a controller issue or PTZ camera issue, I'm not sure. Your help would be much appreciated in me fixing this issue please.
Hello I am sorry you are having issues with the controller. Did you try to contact the manufacturer? Feel free to email me :liveproductiontips@gmail.com
@@LiveProductionTips Thank for your contact info. I just sent you an email with subject: S3 IP Controller. I have tried to locate the manufacturer but have not been able to find the info or their support.
Which PTZ joystick controller has HDMI output that you can easily pick the video that comes in via the ethernet sent from the PTZ camera itself? I am asking this because, i don't want to connect long hdmi cable to the PTZ camera into my video swicther but rather user one ethernet cable to power the camera and also receive receive video from it into the Joyticker controller and then connect the HDMI output from the joystick controller to my video switcher for live streaming.
Good idea but I don’t know any. Few suggestions maybe you should look for a switcher that has ptz control capabilities 🤔 but what can be helpful for you is to just use Ethernet to power and IP control with joystick and use NDI over the same cable to send the signal to your PC for live streaming. So no HDMI need just one able to do it all.
@LiveProductionTips Yeah, you are right. I have been thinking over this. It dropped in mind that the best will be to use OSEE GOSTREAM DECK, which has NDI capability, though we may not be able to control the camera but can receive a video from it.
@@ebentechstudio that’s an idea. Or you could use any joystick to control the camera and skip the switcher. Go directly to the PC because you are able to receive NDI sources into your pc. As long as it’s not too many ( because your Pc may suffer ).
Hello. Im trying to set up my controller but it is not turning on when connected to power supply adaptor and by POE. Do you have any idea about this one?
@@jessona.3313 probably a faulty unit
Great video !!!!
How do you disable the keyboard beep sounds ?????
Somewhere in settings. Please send me a quick email when I will get back to you with clear instructions
How you connect pt camera to hisility controller
I would love a set up video I’ve had this controller for months but never used it because I couldn’t get it to communicate over ip to my camera for control.
Ya this one is overdue. I hope to make one in the near future
I was looking forward to using this PTZ controller but I kept getting blackouts when it was connect to my church's Atem Mini Pro. After an unsuccessful attempt to reach the company for support I returned it. Hope you have a better experience.
Thanks for your feedback. We have been using it in the church that I ordered for, it’s been working no issues. Also we didn’t have any issues connecting cameras, although you need to have a bit of knowledge on how to deal with IP Adresses. Did you buy another brand?
@@LiveProductionTips No. The others I've found are too expensive-- $400+. I'm using a different model without an image screen by the same company.
I enjoyed your video. Would it be possible to do a video on Hsility's newest IP controller, the E2?
Glad you enjoyed the video. I don’t have the unit right now but if I get hands on it I would definitely do it. Thank you
thanks for the very informative video. What is the actual dimension of the controller?
You are welcome. If you check my description there is a link to amazon listing. You will find all the dimensions and other details about the controller
Hello My Name is Sam, we have the same controller your talking about but kind hard to set it up with our PoE to Communicate with our 2 PTZ cameras FAMAKO and AVKANS Please is it Possible to do a Video on The HSILITY CONTROLLER with the screen on how tro connect to the network how you did yours. Thank you. there no video on youtube explaining how to set it up.Thank you and remain Blessed Amen !
Hello Sam thanks for your comment. I will definitely consider making the video
Can you do a video on how to set patrol preset, zone preset, set pattern, and call patrol & pattern, thanks, I have the same controller no instruction on how to do this, I can set the presets positions, just don't know how to transition from one point to another with the presets with the zone or pattern presets
I am considering on doing more about this controller . You are not the first to ask
Is there any way you can help me hook my control up? Having a hard time with it?
Absolutely. I am happy to . Can you send me a quick email ? liveproductiontips@gmail.com
Hello! I have a brand new AVIPAS AV-1081W and when I try to connect to my PTZ controller (LEFTEK S3) over the Ethernet cable and I am unsuccessful because when I enter 192.168.5.163 on Google chrome it lets me login, but gives me an error message saying UPDATE. I have nothing to UPDATE because when I click on UPDATE button it does not work at all and I have searched on Google for help and I cannot find anything. Please advise me on what to do
I have never used the AVIPAS AV-1081W, you need to make sure it is compatible with the S3, some cameras may not support the S3 protocol (on-vif) check your camera may be using Visca Protocol
@@LiveProductionTips It was working for three months then I turned it off while I was trying to place the camera on another location. When turned it on it was not detecting. First time it was not on internet, but I was using ethernet without internet
@@bravsss9984 could be IP adress issues
@@LiveProductionTips I will try again tomorrow, following one of your video and I will let you know
@@bravsss9984 sounds good. We’re you using static or dynamic IP ?
How you connect this to the laptop using obs to stream live
You can use any capture card (HDMI to USB) and connect the camera using an HDMI cable , and the controller will help you control the camera. I hope I answered your question right
Thank you for your comment
Hi I enjoyed and appreciate all your informative videos. Because of your videos I purchased this machine along with two 30x zoom AVKANS PTZ for my church and they are lovely.
I'm also planning on getting the AVKANS tracking camera as well. Thing is that I don’t know if I'll be able to control the auto tracking from this controller. Can you inform me on this? Thank much.
Hello Carlton, I am glad you found my vids helpful. It’s also awesome to know you built a full setup and you are happy with it.
As for the Avkans Auto tracking camera I will look it up but I don’t see any reason why It wouldn’t work with the controller because they use the same protocol
Please let me know. Thanks.
Which tripod are you using for the ptz at 0:10?
It’s actually a light stand I added a slider ball head though. If you need the same ball head let me know
@@LiveProductionTips Thank you. Do you mind sending me the link?
@@dgreene3209 sure. Here is the link for the ball head:
amzn.to/3wYEbGu
For the light stand you can use any light stand I actually use what I already had from my lights since I don’t use them every day
Hello I have the same controller for my PTZ camera and i am having a bit of an issue i am looking tofix if possible you are able to help me. It has been working just fine for almost 1 year now and i like the quality but now i am noticing that for some reason it sometimes disconnects from the IP and the screen turns black and i cannot control the camera. When that happens i am still able to see the camera in my preview monitor but in on the PTZ controller. I usually have to wait til the controller connects back to the IP or i do a search of the IP and connect to it again but then after a while it disconnects again. I don't know why it's doint this or what's causing the controller to do this. Could it be a controller issue or PTZ camera issue, I'm not sure. Your help would be much appreciated in me fixing this issue please.
Hello I am sorry you are having issues with the controller. Did you try to contact the manufacturer? Feel free to email me :liveproductiontips@gmail.com
@@LiveProductionTips Thank for your contact info. I just sent you an email with subject: S3 IP Controller. I have tried to locate the manufacturer but have not been able to find the info or their support.
is there a way to lock the ip address in. See if that helps.