If your engine oil has no water in it or metal flakes than your engine and pulleys are bad. Also if your car doesn't leak oil than that means you need to drill some Holes by oil pan to make sure it leaks. Also use a 14mm wrench to tap the window pretty hard make sure they can break in Case an emergency
Yeah I just upgraded my flat tappet muffler bearings to roller muffler bearings and gained about a 100 hp! Also some Brad Penn full synthetic self contained alternator lubricant.
@@v0lts Some people are not mechanical and do not work on cars, so they may have no idea if this works or not. That is why I left that comment, to save them wasted time!
*The Fact That We Have To Live With Gullible As People Who Believe Shi Like This & Actually Tell Actual Mechanics How To Do Their Job Is Sad As Hell* 😂
The chime means it’s vibrating, it’s loosey goosey, everything is all good. The lack of chime means it’s not vibrating, means it’s tight, meaning it’s not spinning freely.
If Mordecai from regular show was a mechanic
😂😂😂 spot on
i can’t unhear it
That one sounds like it needs more blinker fluid
Or grease the muffler bearings
@@loganswepston8978need a pipe stretcher for that😂
I KNOW THAT ONE!! 😂😂😂😂😂😂
Definition of why you can't take 50% of things you see on RUclips seriously😅
Specifically a 14mm... I'm questioning why that specific wrench
thank youtube for getting rid of the dislike bar
You fucking got me I really went outside to try this and I thought they were all bad
😂😂😂😂😂
If your engine oil has no water in it or metal flakes than your engine and pulleys are bad. Also if your car doesn't leak oil than that means you need to drill some Holes by oil pan to make sure it leaks. Also use a 14mm wrench to tap the window pretty hard make sure they can break in Case an emergency
A customer just asked me about this…. He said why aren’t you using the 14mm wrench trick on the pulleys… he was being serious btw 😂😂😂
😂😂😂😂
Yeah I just upgraded my flat tappet muffler bearings to roller muffler bearings and gained about a 100 hp! Also some Brad Penn full synthetic self contained alternator lubricant.
Needs more cow bell 🤣👍
Please tell me this a joke
Right
Thanks. Installed new idler and belt. Sounds better now
This is a joke guys.
DO NOT FOLLOW lol
I was ready to go whack the shit out of my pulleys 😂😂😂 cuz I'm like no f'n way
Lol
Bruh I just bought a 400 pulley set TF! Lol
Its crazy how we all share the same voice with someone...
That last one the alternator has a clutch under the pulley that's why it doesn't chime. It doesn't mean it's bad....
Downvote this ish
And you ruined it…..
You're smoking what?
Had to read comments 😅 was definitely unsure of this one
Ive heard of using harmonics to tune a spoked wheel, but idk about this
Great video I’m checking mine when I get off work
Comic relief
I misplaced my 14mm. I used a 12mm with no luck. When I tapped a 2mm with the 12 it was effective.
Trolling “informative” content is just lame bruh
🥱
Anyone with any common sense would know. That makes this hilarious 😂
@@jessebonner6616see I ain’t pressed but I’m just getting into cars so this woulda been a waste of my time
Whatever tho
@@jessebonner6616there's plenty of people that would believe this is real. Not everyone especially Women are car informed.
Is this how Motorhead got started? 😂. Could make quite a little jingle with that 14mm😂
Does the belt have to be off?
YOU ARE CRAZY , HAHAAH
16mm spanner is more precise
Just needs tuned. Alternator pulley sounded a little flat.
Can you perform this same test with serpentine belt still on?
Now you have dents on the pulleys and the serpentine belt will break in half the normal wearing time. 🙄🙄🙄
14 mm rock band as apposed to the 9/16th band
Okay Pablo I'm sure 😅
Crank pulley tad sharp need to lossen it a bit lol
That’s your alternator on top of that so ofc it’s not gone make no dam noise
is this a musical joke? me me me me meeeeee
Bro that is a spanner not a wrench
😎Thank bro
PLEASE DO NOT listen to this for anyone who is looking for serious information.
if you take this seriously you need general education about other things than mechanics before ever touching a car.
@@v0lts Some people are not mechanical and do not work on cars, so they may have no idea if this works or not. That is why I left that comment, to save them wasted time!
Very smart 😮
headlight fluid will fix that
I heard pickle forks can be used as a tuning fork too
*The Fact That We Have To Live With Gullible As People Who Believe Shi Like This & Actually Tell Actual Mechanics How To Do Their Job Is Sad As Hell* 😂
I'm pretty sure he's joking
LMAO!
good one rings like a bell?
*Wtf that alternator not making 1 sound*
Why only a 14mm?
😂
😂😂
wtf bro😂
What if I only have a 9/16
It'll work fine if its long enough to reach the lower pulleys
Why even put this out there? Some people are actually gonna take you seriously.
Lol
The chain for the flux capacitor looks a little loose. Maybe a turbo incabulator issue?
yeah possible ion cable staying open
Good thinking... that could cause the unilateral phase detractor to lose its capacitive duractance.
Really!
Change it and wack it
Typical mechanic. 😂😂
Bro what
😂😂😂😂😂
Lmao
That not how I do
Hmmm
Is this true or not because I don’t have time for games can someone please help
Hmm figured you would know, especially you being a “mechanic” 🤔
Can someone explain how this works?
It's not tight - broken bearing or else..
The chime means it’s vibrating, it’s loosey goosey, everything is all good.
The lack of chime means it’s not vibrating, means it’s tight, meaning it’s not spinning freely.
@@psychedelicbdsm7301 You are retarded
Bs
The best advice!
Sound helps to recognize.
Appreciate you.
Hahaha !!