Mathews VXR - How to sight in CBE Engage Hybrid 3 pin
HTML-код
- Опубликовано: 15 сен 2024
- 2020 Mathews VXR 28. New Mathews inc. bow for 2020. This is VXR 28, which is the 28 ATA model. Sighting in the new CBE Engage Hybrid 3 pin at 40, 50, 60 yards. How to sight in this bow sight was relatively easy but time consuming.
SUBSCRIBE HERE: / geleeoutdoors
MY OTHER CHANNEL: / 920tactical
Always taking DONATIONS to help with my channel, gear review, camera equipment
PAYPAL: www.paypal.com...
Mathews VXR 28
www.mathewsinc.com
CBE Engage Hybrid 3 Pin
custombowequip...
Easton FMJ
www.eastonarche...
QAD HDX Ultra Rest
www.qadinc.com
Rage Broadheads
www.ragebroadhe...
Nockturnal Nocks
www.nockturnal.com
Contact info:
Instagram:
/ gelee_outdoors
Email:
leege0087@gmail.com
Camera:
Canon M50 w/ Kit Lens
Microphone - Rode Mic Go
Tripod:
JOBY GorillaPod 3K
Video Editing Software:
Adobe Premier Pro
#mathewsarchery #bowhunting #hunting
Disclaimer: This video is strictly for educational and entertainment purposes only. Any imitations, repeats, etc. of this video done by the viewer(s) will be at your own risk. We along with RUclips will not be held accountable for any actions carried out by the viewer(s), meaning any injuries to yourself and or other people because an action was used after watching our videos.
By watching/viewing this video you are acknowledging all of the above. 
Спорт
I just bought this sight today to replace a single pin. Used your video to help me sight it in. Thanks
I have the same sight for about a year now. Great sight and can’t wait to re-sight it in on my new vxr! Nice video. Wish I had this my first time haha, very good info/instructions 👍.
You have the most straightforward explanation for sighting this in and I throughly appreciate it!
I’m a knuckle dragger and it’s kicking my ass! Followed the instructions that came w/ the three pin from CBE and your explanation as well. My results are: use tape #12......which after installing #12 has my 30 yard pin on the 53yard mark/line....got no clue what I’m doing wrong.
Any advice?
Thanks in advance!
Outdoors Junky thanks for the reply! I used the bottom pin as my “floating pin.”
Sighted it in at 30 then made the mark on the white tape then sighted in at 60 then made the mark. I’m still getting the same as before.
I’m just gonna head back to the archery store and beg those dudes to help me out. Either way I appreciate your time!
R, John
@@johnwilliams5371 you have to move the pin to the 60 line once it's sighted in at 60 after putting your tape on
I had the axcel carbon pro accustat for 2 days and sent it back and got this. On the axcel I didn't like the slider knob. It was very hard to grab and turn and I kept smashing my knuckle on the windage adjustment knob. This sight was $150 cheaper and actually looks better.
I like the Carbontouch Pro a lot better, more aftermarket scope housing availability if needed and resale value a tad bit higher
But the CBE is a solid sight
Great video!
hey great explanation. If I dont sight on level ground will that mess everything up?
Just got this sight 3 days ago and can’t figure it out. I used my last pin as a floater and sighted in at 30 and 60. Got my gap and needed to use the #11 sight tape. When i slapped it on the 60 yard marker was on the 75 yard line. What am I doing wrong?
I’m running into a similar issue. Did you figure it out?
@@sean-lukebrija5534 yeah, so you can use any pin to determine which tape you will use. I sighted my 20 30 and 40 pin first. Then I used my 30 pin to determine which tape I needed. When you have the right tape you have to loosen up the socket screw where the little red arrow is and align it to the pin you want as your floater. I used my 40 as a floater so I adjusted the red arrow to be on the 40 yard mark
Correct, when you have it sighted in, move the sliver sight selector to the appropriate yardage you sighted in last
Thanks for this Video. I just got the exact same sight and am still sighting it in. Did you receive a loose connection / slight wobble near the sight housing ? I’ve cranked down all bolts including those that make tool less adjustments click adjustments. Its at the very end where the scope housing connects to the sight bar of that makes sense. Noticeable on shot.
So are you still liking it more than the black gold? I see they have a new black gold pro ...I'm torn between this one and that
So after you sight your 3rd pin in at 60 to choose your sight scale, that’s when you adjust your rapid drive back to 3rd pin sighted in at 40 yards and set your red indicator at 40 as well?
Yes if you’ve sighted in the fixed pins 20/30/40 and using the 40 yard pin (3rd pin) as the “floater” you’ll need to leave the indicator needle at 40 yards as the “home base”
After that, just remember whichever pin is your floater and dial, shoot. Remember once you move the dial away from 40, the top two pins are no longer useful until you set the pin back to 40
Came across your video while researching 3 pin sights. Currently shoot the CBE Engage Hybrid single pin. How did you like hunting with the 3 pin sight? Any added insights after having it for a year?
I ended up selling this before hunting season started.
I currently have a single pin Axcel Accutouch CarbonPro
@@GeLeeOutdoors I'm in between getting this one and the accutouch(which luckily will be in stock next week lol, but is way more expensive over here in Sweden).
What drove you to that decision?
Which one u like better CBE or black gold? Pin brightness between the two sight?
Hey man, awesome video! I just picked up the single pin version for my hoyt prevail 37 to start off a target set up. Really enjoyed the honest review!
Also, just out of curiosity, but do you happen to be Hmoob?
Keep up the awesome content, brother!
How do you like the single pin Im planning on same thing more cost effective target sight then $500 for sight then $200 on scopes and lenses
@@EDCtexan I ended up returning the sight due to two reasons.
1) My bow was too low poundage-wise, so the preset tapes didnt fit, and the range of motion for the sight didnt allow me to clear a shot at 60 yards (the sight was too low even in the different mounting positions. If you shoot higher than 60#, you’ll be just fine!
2) The bar that locks the adjustment knob actually bent on me. Idk how, but maybe mine was just a fluke, but I just ended up returning it and picking up the axcel accutouch, which has served me much better!
It was more expensive, but it did make life easier, hope this helps!
I did the same, ended up selling the CBE and got a Truball Axcel Accutouch Carbon never looked back
I currently have a single pin Carbontouch Pro, it’s a great sight
I will only shoot whitetail within 35 yards. So I keep my pin at 25 and shoot out to 35 to see how much drop and compensate
@@GeLeeOutdoors i got my 3d sight but i cant take advantage of magnification for indoor and i dont see a point of indoor hunter class 3d yes
Try lining up the sights tapes to the red sight tape. They don't actually match for me. Off by a little bit.
Did you like the cbe better than the spot hogg?
when you sighted in your 30 yards in the beginning before you sighted 60 yards did you use your second pin or 3rd floater pin...reason I ask I am getting this sight in a few days..thank You bro I appreciate it.
@@GeLeeOutdoors Thank you
Why not have the head maxed out at the top of the adjustment, sight in 20 and 30 with your top 2, then 40 with your floater, then just move the floater down to 50/60 etc, that way your home position is @ the top of the wheel adjustment?
@@GeLeeOutdoors just seems like a design flaw. Say on a 3 pin im shooting 56 yards-dial the fkoater to 56 and im good.....go back to shooting targets at 20-instead of dialing my housing back to the top of the adjustment (20-40 good to go already) I have to have the sight at a lower spot, you're losing downward adjustability by doing that...you can't shoot out to distance further before bottoming out, while you can only get closer to a certain extent before its worthless. Hope im missing something, or else im gonna just stick with MBG whose sights make sense (zeroed at the top of the adjustment wheel)
@UC9FJwe5og4pIrsXn6-unqbw no problem, ill reach out to CBE. In my mind, your 20 pin (top pin) should be dialed in when your housing adjustment is as high as it can go to maje sure you can utilize further downward adjustment for longer shots
So you’re saying when you’re doing the sight in. You use the 40 yard pin (bottom pin) and sight that pin in at 30 and 60 yards, correct?
The way the sight tape is placed, are you viewing it through the cutouts in the bow, or so you have to turn the bow to see them? I went with the 1 pin version. What are your thoughts on the 3 vs 1 pin system?
What size pins are you shooting .010 or .019?
Got the 30 and 60 mark sighted in on the blank tape, but the corresponding tape number is way off. The tape it wants me to use has the indicator that was set at 60 on the blank, lining up with the 50. Any tips?
Use that tape, move the silver pin to 60 and see if you’re on
So after you get it sighted in you're gonna move that red pen to your 40 and that's going to be your home base?
Correct
For shooting long distance, 100-120 yards, do you move housing right up or down on riser?
You would move it down closer to the arrow
What's the draw weight of your bow? Asking for me lol
At that time (I no longer have this bow) 72lbs
How is pin brightness without using the battery powered light?
They are decent, not the brightest compared to HHA or an Axcel Carbontouch Pro
I'm new to bow hunting and notice alot of people have their first pin set at 20yd. my question is how would you shoot something that is within 20yd for example like 10yd-15yd?
From 1 to 20 yards the point of impact is virtually the same
Thanks guys!
Do you like this sight build quality and etc more than black gold. I have a $260 budget and got my Vertix Wednesday. First good bow I’ve owned and wanna set it up with a good sight! Mostly 3d and weekend league and light hunting. Can’t decide ez v, black gold, spot Hogg or thiss but single pin
I’ve had both. The build quality on the CBE is a little better, feels stronger, but if you want pin brightness definitely go with Montana Black Gold
If you have the funds definitely the Truball Axcel CarbonTouch Pro (I also have a video on that sight)
@@GeLeeOutdoors $260 is the top end of my
Budget, so most of the black golds, cbe and spot hogge are about what I can manage. I just wanna buy once cru once, but I also do have Amazon return policy I can utilize haha. Thanks buddy. Love your video
Lol yes indeed! If you don’t mind slightly used items, archery talk or archery buy sell trade groups on FB can be beneficial as well
@@GeLeeOutdoors I have to see, the screw plate for the sight tape I really like that for Cbe.
what is the clip at the end of the visor extension
I mean the Clip near the cables
Are you still liking the CBE 3 pin?
@@GeLeeOutdoors I’m looking for a 3 pin sight in compliance with IBO for 3D.
Are you planning hunter or open class
Those pins look low. Not much room for travel.
I’ve seen many people set theirs up this way and works fine :)