Obtained my 2001 revision of the 5s Camry block, Now onto obtaining my 3s cylinder head, absolutely cant wait until I get mine put together, Love these videos Shout-out PSI Racing
@@psiracing where did you start your journey with cars if you dont mind me asking as im 16 and want to work on my own car and swap my 3sfe with a 3sge or 3sgte
@@recleds started our journey in our parents garage at home, day in and day out with cars and engines. Did alot of reading because youtube wasnt a thing back then. Stay passionate about it and just try and learn and take in all the information you can
Thank you for the content love your channel great workmanship hope to do a 3sgte swap in my toyota corolla E121 called down here in South Africa although the 3sgte engine is very scarce here
Is there a 5fwd gearbox for the rwd 3s? And can this 5fwd gearbox work on the 3s Altezza beams…I know the Altezza came 6speed box but I was told there’s a 3s with a 5spd box also… your help will be appreciated 🙏 love all your content keep up the awesome job…
How much do you think a basic forged 3SGTE with a Fully built head with a brain crawer 272 Cam and a Precision 6262 will make about 21 psi :) Just to shut in the dark haven't seen much information with the setup
Hey do u know if the caldinda 3sgte 4/5 gen blocks are also better casts like the 5 gen altezza blocks? Would only the 98+ gen 4 caldina blocks be stronger castings like with the 5s camrys cheers.
Any of the newer blocks, yes from 98 on would definitely be stronger then any 2nd or 3rd gen block. Now as storng as the Altezza block, that I honestly cant say unless we see a picture of the gen 4/5
What would you consider the practical limit of the 3s block? Currently having a 2nd gen 3s block built and I’m aiming for 450-500whp am I risking it or should it be fine?
We have had great success with both square boss and the standard newer 5S blocks. Square boss may be a tad bit stronger in the 1st cylinder freeze plug area. So anytime we source a block we hold onto them for our drag program
@@psiracing that's interesting. What year do you typically see the square bosses? I recall you saying the 98 engines were best to source.. perhaps due to better oil pumps?
@@greenwattle we havnt been able to pin point what year exactly or vehicle the square boss blocks come from. Sometimes we get them from camrys, sometimes solaras. i say out of every 5-6 5s blocks we get, 1 will be square boss
Привет и хорошего дня. Самый простой способ - немного увеличить наддув, если у вас есть хорошая топливная система с лучшим топливным насосом и регулятором давления топлива.
Thank you guys for keeping the 3S love! 🤘 hopefully one day I can reach out and work with you all on a rebuild. Love the content and knowledge.
Thank you, appreciate it. Gotta keep that 3S love going hahaha
Wished I kept my old jdm 3sge... and s54 ... I'm kicking my own ass right now ... thanks for the great info
Obtained my 2001 revision of the 5s Camry block, Now onto obtaining my 3s cylinder head, absolutely cant wait until I get mine put together, Love these videos Shout-out PSI Racing
Thanks man, there amazing engines once you put all the right parts together
i neeeeeeed
With that much work I don't know how you have any time to make videos, keep up the good work my brother 👍💲😁🙏
HAHAHA, thanks bro, definitely not easy but very grateful
Building a 5sfze with a sc14. When it's time for bottom end things I'm glad to know your here in Florida and have this much background in S blocks.
Thank you, we are here when you are ready.
Yesir thanks for all the help i see alot work going on
bro your so cool i wish i could learn from your expertise
Thank you, appreciate it.
@@psiracing where did you start your journey with cars if you dont mind me asking as im 16 and want to work on my own car and swap my 3sfe with a 3sge or 3sgte
@@recleds started our journey in our parents garage at home, day in and day out with cars and engines. Did alot of reading because youtube wasnt a thing back then. Stay passionate about it and just try and learn and take in all the information you can
@@psiracing Thank you will do
Watching your videos sir gets me chill my spine. Hope to see new record hit by the great 3s once again
Thank you bro, lots of new stuff coming soon
Great to see some 3s/5s in action
Beast of a motor
@@psiracing Do you guys sell any parts for the 5S-FE that increase power?
@@SakugaAsu unfortunately no
@@SakugaAsu for the head unfortunately no, block we can
Yeeeehaaaaaaw finalllly theres the video we want to seeeeeee
still setting records I see ,proud of man awesome
Thanks man
holy shit, 20million engine blocks in there haha. love the work and content all the way from south africa
thanks man, appreciate it
Looooooove u alll I wish we could see u at the track brooooooder
Very soon
Great work!!!!!!!!!!
Saludos desde Panama !!!
Buenas!!
Thank you for the content love your channel great workmanship hope to do a 3sgte swap in my toyota corolla E121 called down here in South Africa although the 3sgte engine is very scarce here
Thank you, appreciate the support
Interesting build using a turbo head for a na build lol
Its actually a NA Head originally
Good work
Thank you
3s heaven
Love it!! keep up the great work. Just curious, what makes you prefer going with a first gen head?
Thank you, its been our favorite go to for a while. Only downfall is getting parts because they are all custom
👍
🙌🏼🙌🏼
5S engines are plentyful and cheap here in Aus
Send them over 😝
Is there a 5fwd gearbox for the rwd 3s? And can this 5fwd gearbox work on the 3s Altezza beams…I know the Altezza came 6speed box but I was told there’s a 3s with a 5spd box also… your help will be appreciated 🙏 love all your content keep up the awesome job…
Hey how's it going and sorry for the late reply. You can locate a 2S RWD bellhousing and then that can bolt up to a W series style transmission
@@psiracing thank you 🙏 very much
ATC70's are the shit.
HAHAHAHHA yea they are, wish i had more space to collect more of them
Saludos desde Puerto Rico. hermano de esas T shirt de PSI tienes para la venta.
Ya pronto vamos a acer mas camisas
I needs my mr2 91 3sgte rebuilt like thì but never new which racing shop can I go to.
How much power you looking to make in your MR2?
I am a small mechanical engineer want to know of a 5s block and a 3s head is a good try
Its the best combination that we like
How much do you think a basic forged 3SGTE with a Fully built head with a brain crawer 272 Cam and a Precision 6262 will make about 21 psi :) Just to shut in the dark haven't seen much information with the setup
If i had to guess and conservatively, id say 450ish
@@psiracing ty i got lucky just got the turbo transmission love yall i check out yall all the time 3sgte for life!
@@Cj93mr2 yes sirrr #3stheworld
Any update on the n/a setup. id like to do a setup like this for my camry coupe. what hp do you predict it to make?
we are hoping it makes in the 250whp area
I'm interested to hear about that too. I'm looking into building a 5SGE N/A for my 3SGE powered Celica in the near future.
Hey do u know if the caldinda 3sgte 4/5 gen blocks are also better casts like the 5 gen altezza blocks? Would only the 98+ gen 4 caldina blocks be stronger castings like with the 5s camrys cheers.
Any of the newer blocks, yes from 98 on would definitely be stronger then any 2nd or 3rd gen block. Now as storng as the Altezza block, that I honestly cant say unless we see a picture of the gen 4/5
@@psiracing Is there a way i can send you through some pictures?
@@Nights_Shadow you can email us at psiracing@aol.com
What would you consider the practical limit of the 3s block? Currently having a 2nd gen 3s block built and I’m aiming for 450-500whp am I risking it or should it be fine?
It's a tough call, I would think it can handle 500 but no more then that
@@psiracing the 3s block they were building for me failed blueprinting so I’ve decided to go with a 5s block 🙌
Hey mate. Do you only cement blocks that are for drag racing? hence no cooling correct?
You can do a half fill on a semi street deal
I am looking to Turbo Charge my 1991 3sge what would need to happen before it is ready to be charged???
Depends how much boost you want to run??
@@psiracing i would like to make around 300-400 hp
@@luukhoog8449 unfortunately that is the weakest of all the 3S blocks. Great cylinder head but weak block.
@@psiracing thanks for the info than i think i wont be doing it
Square boss block vs earlier how much of a difference in strength
Honestly hard to say. We have made big power with the non square boss block but it was a fully cemented block.
What is the significance of the "square boss" 5S block? Thanks
We have had great success with both square boss and the standard newer 5S blocks. Square boss may be a tad bit stronger in the 1st cylinder freeze plug area. So anytime we source a block we hold onto them for our drag program
@@psiracing that's interesting.
What year do you typically see the square bosses? I recall you saying the 98 engines were best to source.. perhaps due to better oil pumps?
@@greenwattle we havnt been able to pin point what year exactly or vehicle the square boss blocks come from. Sometimes we get them from camrys, sometimes solaras. i say out of every 5-6 5s blocks we get, 1 will be square boss
@@psiracing Very interesting. Thanks mate
I have 3SGE Beams in a FRS/GT86 and considering turbo charging the beams. My concern is head, what would you recommend
Heads are built well, what concerns do you have about the head??
@@psiracing thanks for the reply, we have problems with valve floating/drop. Just concerned this will be worse when boosting
Hey guy how are you doing wat ur stop number is
you can email us at psiracing@aol.com
Fuck am from barbados😂
HAHAHA
Здравствуйте. Я из России у меня на тойота корона st195 стоит двс 3s-gte от 215 калдины. Что можно сним сделать прибавить мощности 400л.с
Привет и хорошего дня. Самый простой способ - немного увеличить наддув, если у вас есть хорошая топливная система с лучшим топливным насосом и регулятором давления топлива.