Wait, I didn't even think about this! This is legal in states that banned threaded barrels? This is huge as compared to traditional porting on barrels.
Surprised that Lenny didn’t make that point himself, since he left San Diego, California fed up with the increasingly hostile 2A environment California had become.
Put one of these on my 19 and it’s GREAT! I honestly watched this video cause Lenny’s voice and glock tinkering is some of the best ASMR you can find on youtube IMO😂
For everyone who doesn’t know. You need to torque the screw to 15 in-lbs. Do not just hand tight the screw like he did or hand tightening it and putting blue lock tight. The instructions say to torque the screw down that’s it.
Another gotta have “buy me!” Inspector gadget mystical device designed to compensate for poor performance. Train train train properly and you won’t need this kind of techno wizardry on your handgun. Train properly and you will hit quickly hit what you’re aiming at without all the so called aids like rifle optics, compensators, etc. they don’t help your hold, your aim and your proficiency. They only drain your wallet while snickering salesman get rich.
@@j_zales1390 I have a friend that has one on his 19x and one on his g17 gen5.. I'm a Glock fanboy, but I'd rather go with the Shadow System mr920P. But the after burner does look sweet
What happened to the G43x Radian Ramjet Afterburner? I don’t see it on Radian’s website any longer as I remember I was about to buy it about 9 months ago. This would be the perfect Glock to put a comp on since it’s so small.
Very nice, it just won't work for me. I have a Guide Rod Laser from Lasermax and it would block the laser. Radian is a very good company. Comps do work.
Can you use the barrel without the compensator attached? Would it still reduce the muzzle rise? Does the compensator add anything other than a finished look?
Hey, just wanted to let you fellas know if you want an entry level comp/ported barrel that's cheap and works you should check out the aim surplus jtt barrel.
Don’t waste your money. Just buy ammo and train. You don’t need a $400 gadget to help you control your recoil. Esp not for 9mm. Be a man learn how to handle your firearm. Spend money on ammo and training.
The threadless barrel design is a game-changer, especially for those in restricted states.
Wait, I didn't even think about this! This is legal in states that banned threaded barrels?
This is huge as compared to traditional porting on barrels.
@@RNG-999 now we need a thread adapter to that barrel 😂
Surprised that Lenny didn’t make that point himself, since he left San Diego, California fed up with the increasingly hostile 2A environment California had become.
Take a drink everytime Lenny says "Concept." Aaaaaand...go!
can i put it on gen 3 ???
We just made the Gen 3 version available on our website!
Video title said Micro comp and I got excited and thought they finally made one for the Glock 43X like they should have before any other gun.
Thats is what I thought too, also this is made to not need loctight
Same
Same here
Same
Still watched the full video tho lol
'Fast is fine, but accuracy is final. You must learn to be slow in a hurry.' Wyatt Earp.
I also hear ¨slow is smooth and smooth is fast¨
Not the first shot that counts,it's the first hit...-Wyatt Earp also said I believe
Wyatt and Wild Bill are some of the best quotes ❗️
Put one of these on my 19 and it’s GREAT! I honestly watched this video cause Lenny’s voice and glock tinkering is some of the best ASMR you can find on youtube IMO😂
They need to make one for the 43x
Agreed
I just wanted to be the third comment!
For everyone who doesn’t know. You need to torque the screw to 15 in-lbs. Do not just hand tight the screw like he did or hand tightening it and putting blue lock tight. The instructions say to torque the screw down that’s it.
I love the ramjet!! I got 3 of them, can shoot so fast and accurate.
Another very good and informative video. Yes, you are selling, but you also teach the viewer a lot of facts. Job well done
Cool video. I really appreciate you behind honest about the downsides.
interesting product... the 27 might do well with something like this also.
I shoot nothing but comp handguns. It does NOT blind you or have anymore an effect than a regular gun. They are a little louder though.
Thanks for the info Lenny
As soon as Radian released them for the gen5 17 I got one. I have around 1k rounds through it and I love it.
You tha’ man, Mr. Lenny Mag’ 💪🏼
love my ramjet !
Everyone of your videos are FANTASTIC
I love the way Lenny speaks. Great video sir!
“Micro compensator” is the perfect phrase for it. 😂
How does this comment not have more likes? 😂
I shoot really flat and fast with my Ported Glock 43x, I made a few videos on my RUclips page
How does the Radian Ramjet or the Strike Industries Mass Driver Comp compare to the heavy tungsten guide rod in a Glock 19?
Another gotta have “buy me!” Inspector gadget mystical device designed to compensate for poor
performance. Train train train properly and you won’t need this kind of techno wizardry on your handgun. Train properly and you will hit quickly hit what you’re aiming at without all the so called aids like rifle optics, compensators, etc. they don’t help your hold, your aim and your proficiency. They only drain your wallet while snickering salesman get rich.
Think Glock will release Gen 5 17C and 19C's?
zero loctite per Radian, just torque to 15in lbs.
Comps also make the gun louder. I run one anyway.
That looks nice
MAKE THIS FOR G43x ffs PLEEEEASE
I'm not spending 400$ plus for a comp. It looks good, but I can't justify getting one right now. I don't shoot as much as some do
Its a barrel too but yea if thats the price for both that's still way too much
@@j_zales1390 I have a friend that has one on his 19x and one on his g17 gen5.. I'm a Glock fanboy, but I'd rather go with the Shadow System mr920P. But the after burner does look sweet
You are a cool guy, I like your videos
I can almost buy a new pistol for the same price as this
Bodyguard 2.0.
Glock 20 gen 5?
What happened to the G43x Radian Ramjet Afterburner?
I don’t see it on Radian’s website any longer as I remember I was about to buy it about 9 months ago. This would be the perfect Glock to put a comp on since it’s so small.
If Glocks are so great, why do you have to add so much to them?
Same reason a chevy 2500 hd is a great truck off the lot but people still will add new wheels and tires and a Lift. Kinda the same thing lol
Cool video
Very nice, it just won't work for me. I have a Guide Rod Laser from Lasermax and it would block the laser. Radian is a very good company. Comps do work.
Can you use the barrel without the compensator attached? Would it still reduce the muzzle rise? Does the compensator add anything other than a finished look?
I'm fairly new to the community, I'm curious to know with a design like this if it have the same ballistics across the line
Can you please show us what the comp looks like on the G49? Or 47 if easier
Why doesn’t Glock make compensated models anymore?
Can you use the Glock 19 afterburner and ramjet set on a Glock 23
Should’ve added the radian compressor guide rod it’s the best in the game
What spring are you using with the tungsten guiderod on that set up?
I just got one for my 19/19x but havent tried them yet haha
What was the spring weight on the pure tungsten rod?
could this be used for a conversion on a g22
Yeah fine barrel but not all 9mm grain bullet will accommodate radian
Never had an issue with any grain. But works best 124 grain
@@williamcooper4325 to me it did
Blue Loctite NOT red.
NO loctite per their instructions.
When are we getting this compensator for the 43X ?
Do they have it for the 43x if so what one would it be
Wish they would make this for the G34
Got my Afterburner+Ramjet for $290 at Buds and it’s been amazing so far, plus it looks badass 🔥
I just wanted to be the first comment!
will this fit on a 43x?
Does this work for Gen4s?
Any reason why Glock stopped producing their “C” models, the compensated ones?
@@iyn1911 no idea why but I did pick up the 19C like two months ago at buds gun shop and just ordered a 21C. Check there if you’re interested
better late than never...you guys sleeping on this for a while. your groupings were the best with a stock glock lol.
could you use this as a conversion from .40 to 9mm. and let me know if they ever make it for a 30sf
Or a G21/20/29/30 😊
It’s cool, but not cool enough to have to spend more money on a new iWB and OWB holsters. If they can even make one.
That’s why I always buy open ended holsters.
If you use the model for a G19/G45, it will fit perfectly in a G17 holster. The G17 model with the comp will fit in a G34 holster.
Hey, just wanted to let you fellas know if you want an entry level comp/ported barrel that's cheap and works you should check out the aim surplus jtt barrel.
About half as effective but costs 25% the price. Not bad.
Damn. It’s only available for the gen5.
time to upgrade *eyes emoji*
Radian does make the Afterburner+Ramjet for the Glock 19 Gen 3 and the Gen 4 also. They also make one for the Sig P365 3.1" barrel.
@@davidhudson2527 ooo I have a 365 might have to look into that one
I got one for my gen 3. Check Brownells👍
We just made the Gen 3 available on the site!
Gen 5's only? Price?
@@glockstore Thanks!
Gen 3 is now available on the site!
@@glockstore Gen 4’s?
💪
I just wanted to be the second to comment!
The disadvantages outweigh the minimal gains. There’s no recoil problem to solve with a G19
How are you getting away with modifying guns on RUclips?
It looks like it would still work even without the bolt on compensator. Has anyone tried that?
early
Don’t waste your money. Just buy ammo and train. You don’t need a $400 gadget to help you control your recoil. Esp not for 9mm. Be a man learn how to handle your firearm. Spend money on ammo and training.
Pure Tungsten Guide Rode + Radian Ramjet Afterburner Compensator = 🤌🏻
What weight?