The Basics of Overclocking Ryzen RAM Using the ASUS BIOS
HTML-код
- Опубликовано: 27 авг 2024
- This is a basic guide teaching you how to overclock Ryzen RAM. I'm using the Asus bios in the Asus x470 Prime Pro motherboard. The memory used is Corsair Vengeance LPX DDR4 3200mhz. This is Hynix memory so the overclocking potential is more limited than Samsung RAM. I go over frequency and timing overclocks and give an idea of safe voltages.
This video just covers the basics and in the future I may upload a more in depth guide where I go through the whole process of stabilizing overclocks.
If you have any questions please feel free to ask them in the comments below and I'll be happy to answer them. Thanks for watching!
![How to overclock Ryzen 5 3600/X [3600Mhz RAM] | EASY Mode Tutorial (4.2Ghz) | Asus B350 Strix](http://i.ytimg.com/vi/Vt6vBZzc2gM/mqdefault.jpg)
That's a nice example of explaining everything without explaining anything... NEXT!
Me too!
omg...this *cough* tutorial...actually irritated me for the 3 mins i tried to watch..
Actually he does explain good. Problem is you guys who watch does not have enough basic understanding of it to follow what he says and when he jumps around showing you. Listen and watch what he says. This is also not for someone who has never seen this before and thinks its a standars tutorial to change on all ram and MBs lol
Get more knowledge and watch again.
lol no. you don't call a tutorial "the basics" if it needs basics to be understood
DJ Full this was the basics. I was having issues with my timings, but overall this is simple and easy to follow. The guy you replied to is referring to bios “basics”. You should listen to what he says, this wasn’t meant for entry level to pc. It’s meant for entry level to configure your oc’d ram speeds.
I was having issues with my new itx build and it kept stuttering during games. Now it's smooth like butter, Ryzen loves high frequency ram! Thanks alot bro, I appreciate it!
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
Bro...using SOC LLC5 is how my old 1700 got fried. It took about 3-4 weeks until VRM temps were 103C at idle without any workload... voltages needed to be raised and frequencies needed to be lowered to stop crashing. I realize its ok while benchmarking because unsafe voltage is kinda ok with very good cooling for short times like a couple hours overclocking session. But i dont think noobs should ever go above 2-3 LLC. If you dont set it to manual it goes to 1.15, add raised vdroop which LLC gives you more than you ask and that and you have a unsafe voltage and some will think its fine. Great video but i just wanted to clear that up. Keep it up man
Where is LLC set when on auto?
@@Tjecktjeck ruclips.net/video/Z8nFdFpuVBg/видео.html here is where i learned what llc is doing. Auto is allowing all Vdroop. Anything lower than the highest 2 setting for example llc4 and 5 giv tge exact voltage and MORE voltage for level 5 pending on your board. I have an asus x470-F and i never go above level 3 for cpu. It is meant when the load on the cpu makes the voltage drop too far and llc doesnt allow it to drop to where it crashes. Be aware that software wont tell you about this added voltage especially highest llc thats why its stupid. Highest LLC IS STUPID. I just want everyone to know its not something you want to max out. Personally llc 2 is perfect once cinebence wont finish and voltage almost helps. Just remember some vdroop is necessary. Its how switching power supplies work
Instead of spending $250 or more on better ram I’ve been wanting to try to oc my Corsair vengeance 3000mhz CL16 to at least 3600 to match the infinity fabric frequency on my Ryzen 5800x. This video was very informative and is a good base line for me to start !
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
hi
i have Panther Black-Gold 16GB (2x8GB) 3200Mhz CL16 DDR4 Gaming Ram (AH4U16G32C08Y7GAA-2) 2x16 gb total 32gb
with xmp it overclocks to 3200mhz
can i still overclock
i can set to 3233mhz and 3333mhz pc runs with no problem
my vddcr soc voltage is auto it shows 1.00v
my dram voltage shows 1.35v and yellow
i have amd 5900x
i have asus prime x 570-p
my cpu core ratio os 44.00
vddcr cpu voltage manual i put 1.21250
what i should do
i need help please
what is the max voltage for my ram
can i just set to 1.4 volts my dram voltage and set my memory frequency higher than 3200mhz
thank you
Becareful with memory frequency if you get high or too low and restart your pc it wont startup the only way to fix it(i think) is to remove your CMOS battery and wait for about a minute and put it back in, what this does is it resets your bios settings to default.
really good tip this has happened to me before lol
Yep, think that’s what just happened to me. I lowered the latency timings to much
There is a jumper you can short out with a jumper cap near the battery labled CLCMOS, CLRTC, be sure your power supply is off before you do that.
it happenede to me before i tried removing the battery didnt work
i had to send the asus service
they fixed the problem
OMG tysm i finally Unserstand it i watched over 200 RUclips Videos to know what i have to do and what is rekemended and didnt Unserstand it but thanks to your Video i finally Unserstand it tyyyy
I like how he said the TRC cant be lower than the sum of DRAM PRE time and DRAM ACT time. Then he sets the PRE time to 18 And ACT time to 36 and leaves TRC at 51. 18 + 36 = 54 and 51 is less than 54. I don't know anything about overclocking but contradicting yourself doesn't make me feel confident. Lets see how the rest of this video goes... Maybe i just misunderstood him
I'm a year late, but the TRC is at auto, so it'll abjust itself automatically
So I just got an 3950x it’s good so I’m never going to overclock my system. Firstly because I don’t think it’s worth messing up a 750 dollar CPU I just got today, second it runs as fast a I need it to at stock levels. I just upgraded from a 1700 Ryzen. It was shit compared to what I’m getting now with just stock. I don’t think I’ll replace this 3950x for YEARS.
Edit: I’m now putting down your totorial, but I’m personally not taking a risk with this others might, but that’s them I still found your videos interesting to watch 🙂.
Why did you buy it for 750 wth
Good lord get your thoughts together before you make a tutorial video.
Honest to god, I've seen someone try to start a Minecraft lets play even more shaky then this. It was so bad his attempt at running jokes came off as cringe adding an UM counter to the top right...
Thanks I'll try to get my ram to its rated speed hopefully tomorrow.
4:18 6:21 for myself
Thank you for guide!
Why i cant enable DOCP?
Thanks for the vid man really helpful if you have an asus x570. I’d mention the dram calculator though I just found out about that and looks really cool. With imported XMp profile and correct manufacture and stuff which is really hard to pick lol.
Instructions unclear, my RAM sticks made a bang sound, and they're not working anymore.
Good Lord!
Why tf would you OC anything if you don't know how to do it properly. You changed your voltage and that is why your shit died. You can't watch a single video and think to yourself: "Aight I know how to OC now easy".....
Waited 2 minutes for my PC to POST like aww this gon be good!... oh shit
You jump all over the place dude. Lost me. I think you need to slow down or only do what you know.
Loved your keyboard press sound hahaha
I'm on the asus prime b350 plus mobo, and i just went in the bios and set my 2666 kit to 2800 mhz. Didn't touch anything else. Should I change the timings too or it's fine?
Voltage and timings. Get to 3000+
Did it work out for u? How many extra fps?
@@hariharanb785 done long time ago
@@Mriceman604 A bit more stable on 1% lows, but I noticed more difference when getting another stick of ram, having 2x8gb in total. Dual channel makes more difference.
What exactly is VDDCR SOC Voltage Override?
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
Why i always fail to boot after oc it?only from 3000 to 3200, t force delta rgb 2x4gb 3000mhz
Duck Head same ,im stack at 2666hrz
@@PaulPaul-si8tu you just need to enable xmp to run it defaultly 3000mhz
@@duckhead2948 how ?Im using asus B450f mobo with the latest bios,
Same boat bought a 3600 trident z neo kit
Cant go past 3200
And when I hit 3600 I had some crazy high latency high 20s
@@rolithesecond what can we do about it...
FYI this guide is not entry level nor is it really helping me understand how ASUS did their BIOS...maybe slice the BIOS overclocking into a series? I got nothing out of this video.
Thanks. Newer motherboards are so stupidly convoluted and difficult to use.
Man, if there were so many settings for an oc setup, you should have separated them instead of this info dump.
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
Nice video, you should also do a overclocking of the 2700x video, id love that!
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
I have the same motherboard but for me this first overclocking option does not appear, you know what it can be?
you have solved this?
Same here
My DRAM voltage is limited to 1.35v.
I can't pass 1.35.
Mobo TUF X570, R3 3200G and Corsair Vengeance 2x8GB 3000mhz.
Try to hit the +/- keys on ur number keypad
It should allow u to set the current display value(1.35) it gives u the choice once u hit the +/- keys to set between 1.2 n 1.8
Must keep under 1.45 to maintain stability for ur vdram overclocking (u can also add value to the vddcr-soc, setting relates to ur vdram) speed u need to give it at lease some sufficient power... also if u have drmos (powerManagercontrol) which most new asus board includes u should be able to set all this with the mb software Amorycrate... or in the bios (ai tweeker)digital vrm
i have 2 16 gb 3200 mhz ram with a b450m plus mother board and the most my ram can do is 2133 mhz why is this and can i fix
same here
same
i can't overclock
When I go on ai overclock tuner it only has the option manual and auto ?
I bought an Kingston DDR4 3000 Mhz RAM and just do up the Frequency to 3000 Mhz. Everything else is on auto. I leave the rest on auto since I don't know what I am doing.
Since I bought already the RAM of 3000 MT/s then I wanted to get to most of it as well.
I leave DOCP on auto. If I put it on DOCP the PC isn't booting anymore.
So I leave DOCP on auto and up only the Frequency of the RAM to 3000 Mhz.
When I set it to DOCP it changes automatically to 3000 Mhz and shows some tight timings of 15 17 17 17. So I guess that's the optimum but can't use DOCP since it does not boot.
Just setting the frequency to 3000 Mhz (DOCP on auto) then the timings are 22 21 21 21. But that works.
I disabled Precision Drive Overboost and limited the thermals of the processor to 65 Degrees Celsius.
Does anyone else just up the frequency of the RAM only and everything else on auto?
it would have been handy if you told us what are the parameters you are changing... any upcoming videos with x570s?
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
please don}t follow this "tutorial" there is no clear explanation on anything and playing with voltages is not that safe
Do you find manually tweaking and testing better than running Thaiphoon and then exporting/importing the XML into DRAM Calculator and plugging those numbers in? I am trying to figure out the most stable RAM setup. I bought a 32Gb kit for my Tuf X570+ that is on the QVL for my board, but @ 16Gb (not 32Gb). Ram runs fine @ 2133, but cannot auto @ 3200. Trying to get it run @ spec, at least. DRAM Calculator timings are much tighter. Kit is also Samsung B-die.
what did you do
i have Panther Black-Gold 16GB (2x8GB) 3200Mhz CL16 DDR4 Gaming Ram (AH4U16G32C08Y7GAA-2) 2x16 gb total 32gb
with xmp it overclocks to 3200mhz
can i still overclock
i can set to 3233mhz and 3333mhz pc runs with no problem
my vddcr soc voltage is auto it shows 1.00v
my dram voltage shows 1.35v and yellow
i have amd 5900x
i have asus prime x 570-p
my cpu core ratio os 44.00
vddcr cpu voltage manual i put 1.21250
what i should do
i need help please
what is the max voltage for my ram
can i just set to 1.4 volts my dram voltage and set my memory frequency higher than 3200mhz
thank you
@@gorkman5697 I can't remember where I landed on that kit. I am running a 64Gb 2 stick kit these days, without issue.
In the "Ai Tweaker" tab I don't have the "AI overclock tuner" option. Do you know why?
Update your motherboard
can i manually oc a 2666 ram to 3200 by changing memory frequemcy and change the dram voltage to 1.35v and thats it?
i have a 4650g pro ones and a bad cpu what should i do and i have 32gb ram
Getting Bluescreens bc i used your method, but cant solve it cause you didnt explain anything
lmfao
BULSEYE!
So I just bought ddr5 ram for a new build.. it was listed as 6000mhz but it’s only showing 4200mhz… apparently it can go to 6000 when over clocked and is sold with a overclocked guarantee?
Idk anything about this stuff but I figured you buy 6000 you get 6000?!
The 6000 MHz is with XMP/ DOCP aktiv don't bother overclocking your Ram if you only want it to run on 600 MHz just aktivate it in you BIOS.
Hey! is that possible for just one stick of RAM? If so, which channel?
Can I ignore this message then "Performamce is usually best when memory Clock:FCLK is 1:1 Synch" ?
Is that safe to go ahead with that D.O.C.P?
i want to get my 2933mhz furyx to 3200mhz, what timings should i use and voltage? i have the b450 tuf gamin plus
Jonathan650 Same here, I have the B450M though, but it’s the TUF gaming plus one but I can’t seem to get my 3200mhz ram up to speed :(
@@nicholasnasser8727 i managed to get mine stable at 3200mhz 19-19-20-20-44 or something like that, not the best i think but it works (= 1.35v
Jonathan650 thank you I’ll try that out
my 3600 isn't overclocking in Asus Motherboard 😢....but ram and 3400g does
i have B550M PLUS and XPG SPECTRIX D41 4000mhz 1.35v / 4133mhz 1.40v
i can't use D.O.C.P when im plug my ram modules on A1 and B1 slots ! the system goes on and off 3 to 4 times and enter the safe mode! -
only works on A2 and B2 slots, did you know what can cause that??
I can't enable DOCP. When I click on it nothing shows other than disabled..
Showin Up same lmao, haven’t seen anyone else with this issue
For me docp doesn’t show up
Thanks for the video. On my TUF gaming A520M plus I notice the bios does not allow odd numbers for the CAS setting if you set it to an odd number it adds 1 to the setting.
My vddcr cpu voltage is at 2.692, how do I lower it in my bios as it's causing shutdown after over heating, would appreciate your help
Where can I find the multiplier in this bios?
System memory multieplier
it doesnt exist.simple
This is super frustrating. How do I get to the BIOS. Idek how to get there. How do you get that screen to pop up !!???
spam delete when you turn on your computer
Too late now, I was going to advise reading the motherboard manual, it will show you a lot of things.
So I'd like to go to 2800- 3200mhz from 2666mhz how would I do that?
I am SERIOUSLY don't think this guy knows what he is talking about.
Idea of overcklocking is to make ram faster. So in order to increase overall speed of ram he increases latency. So he makes ram timings worse to increase speed. I suspect he wins NOTHING on speed increase as such.
I need help mines doesn’t have AI overclock turner
hey I found your video by a reddit thread. First off thanks for your time. I had worked with Corsair support because my Corsair Vengeance 3200mhz ram randomly crashes on me (mostly upon start up) this is with a Ryzen 9 3900x + ASUS tuf gaming x570-plus (wi-fi) mobo. I've ran memtest86 which passes 4 pass throughs. So corsair is ruling this a cpu/mobo issue.. I can run the RAM at default 2133mhz fine, it's only when running at 3200mhz. Are the auto settings not viable with enabling XMP? I have ensured 1.35V but wasn't too sure what else to tweak. I plan to reference this video when I get home, although my use will be for gaming/streaming vs benchmarking, but figured I'd shoot these concerns out to a veteran like yourself. Thanks! -Dan
hi
i have Panther Black-Gold 16GB (2x8GB) 3200Mhz CL16 DDR4 Gaming Ram (AH4U16G32C08Y7GAA-2) 2x16 gb total 32gb
with xmp it overclocks to 3200mhz
can i still overclock
i can set to 3233mhz and 3333mhz pc runs with no problem
my vddcr soc voltage is auto it shows 1.00v
my dram voltage shows 1.35v and yellow
i have amd 5900x
i have asus prime x 570-p
my cpu core ratio os 44.00
vddcr cpu voltage manual i put 1.21250
what i should do
i need help please
what is the max voltage for my ram
can i just set to 1.4 volts my dram voltage and set my memory frequency higher than 3200mhz
thank you
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
So i am having a situation here. I overcloked some crosair lpx vengeance to 2933 mhz just fine, until recently. When i started my pc this morning it started for a sec and then reset after that i had to wait like 20 secs to boot and after that i have this error"overclock failed". Someone knows what could be the problem here? I mean somtimes works fine sometime is not working its weird. I overclock just like in this video , everyhing is set auto but still i have this problem
Well done, great video.
I have exactly same motherboard as you and same RAM as well and I tried the exact same RAM settings but I couldn’t manage to get my PC to boot. Would you happen to know why?
silicon lottery
Me too
Question
@Dan’s Desktops I'm running my 2700X on 4.3 easily, above that it get's complicated to keep it nice and stable. But have (an expensive, well for me it is) AMD optimized CL14 3200. The Ryzen 2000 series should run better at tighter timings and the 1000's on higher frequencies right? What can I do best? Noob at memory overclocking btw... I did get it faster, but windows will give an occassional error... 😅 ( highest stable score on Cinebench is 1950 and a bit) Want to get it above 2000, just because... Came close but was unstable...
Thx for you trouble and time!
Oh... p.s. Running on a ASUS ROG Crosshair VII, so pretty overkill... I'm never cheap concerning motherboards...
U still around
i have 3400mhz ram but only running 2666mhz i tried to enable docp in bios but it wont post. plz help
I don't see a setting in the Asus bios (x570 tuf gaming) for the uclock. ryzen has mclock (memory) fclock (infinity fabric) and uclock which afaik is the on die memory controller speed. I want to run 1:1:1 ratio... i can set my memory speed, and my infinity fabric speed to 1800 or even 1900mhz, but i don't see a manual setting for uclock, and I'm wondering if it's maxing out at 1600 and not locking to 1:1. or maybe it even goes to 1800 but not 1900? I don't know... I want to know what the behavior is and whether or not it can be changed. Some brands of motherboards I believe allow user control of this setting. If I had this information, I could set my ram and IF clocks for a 1:1:1 and tighten ram timings.
Hey i got H310M-E ASUS PRIME And i cant see the Ai overclock and multicore any ideas thank you
You need a b450 or higher motherboard to have the choice to overclock
I am not even able to disable the geardown mode. I have to either let it be on Auto (which i suspect is keeping it enabled) or enable it. And due to that it wont let me even reduce my first cas latency value so running right now as 16-14-14-28 at stock 3600 MHz speed. Will try overclocking it and check whats the outcome.
Does A520-mK Had pbo settings?
if i select docp without changing anything i wont get a post...
zerou24 I run XMP
my ram supports 3200 mhz when i change my settings to docp and scale upto 3200mhz with dram voltage of 1.35v pc crashes 2 to 3 times so i increased my dram voltage to 1.4v and it works will this damage my components?
is it safe to run more voltage than the ram needs? for instance, can i set it to 1.45 and leave it there even if i only need 1.2 for my oc?
Sorcerous Pistolmaster it will burn it out over time and cause wear. Over time to maintain the OC you will need to up the voltage to dangerous amounts or turn down the overclock
AFTER SAVING IT SAYS UNABLE TO BOOT NAD ENTERS SAVE MODE AND SENDS ME BACK TO BIOS TELLING ME TO CHANGE IT BACK
I have a 8gb dual channel g.skill ripjaws ram at 2400mhz. I want to take it up to 3000mhz. I wanna know how much volts to give
16-18-18-18-38-56 on 1.35 - 1.36V should be doable for 3000Mhz.
I do not posess the function of docp, any solutions?
I switched my memory frequency to 3600 which is what my ram is rated for now my computer would turn on,lights and everything but nothing on the screen
using the exact same mobo
Do you know a fix??
Same issue how to solve ?
My mobo could only handle 3200 MHz so I switched it to that and it was able to boot make sure it’s on DOCP or XMP then switch to your a frequency that your motherboard supports
@@datboi7624 Yes bro solved issue
@@datboi7624 wait i have the same issue, my just isn’t booting period. how do i get to bios and change it if it’s not working ???
@@santutunga4369 wait i have the same issue, my just isn’t booting period. how do i get to bios and change it if it’s not working ???
I have exactly the same screen on my bios my AIO PUMP and some fans are N/A that got me worried.. should i be? because lately when i am gaming i can't hear my fans spinning.. it was ok few days ago.. i noticed this changes when my system got infected with a Cryptocurrency Malware i think i removed it completely. but i still can't hear my fans, they are working but not at the rate as before
I’m trying to figure out why my pc turns on then off then starts normally, does having XMP enabled maybe have something to do with this?
maybe. turn xmp off and see if it stops happening.
hello i dont have ai overclock tuner in my bios how do i install or enabled it
I don't have AI Overclock Tuner, Custom CPU Core Ratio and TPU but I have Target Memory Frequency something.
Why I don't have the other options? is it because I don't have an updated BIOS?
Same i dont have them
I have asus a320m-k motherboard. when I change memory frequency 3400 mhz then no display in my monitor. I have gskill 3000 mhz ram. Please help. Please reply anyone?
Hey guys can you help me, on the five volts, my Pc is about 4,6, what can i do to fix It?
How overclock igpu?
I have a 2x4 gb 3200mhz hyper x predator and the mobo recognises it as a 2400, what to do?
Use the xmp profile bro...you can enable it in the bios.....
@@nonickname2372 can you tell me more? The mobo i have is an asus b450 plus and my cpu is a ryzen 2400g
you do realize, most of cpus are locked at 2400+/- Ghz? u can only overclock it so u can surpass the limit
My question is..do you need to get extra cooling if you OC ram? And does it lover the lifetime of it?
No you don't need extra cooling and also yes,it does lower the lifetime a bit ,let's say it has 20years it would be around 15
Buenas tardes, pregunta? cuando realizo el overclock a la ram de 3200 a 3600 al comprobar los cambios en CPU Z el Uncore Frequency me queda en 800 Mhz y el DRAM Frequency en 1800 Mhz, ayuda
Si lo pones en 3600hz debes de ponerlo lo demás 1800hz para que este estable
I don't see the option of ai overlock Turner, solution? my mother is the ASUS PRIME A320M-K
You found solution bro?
@@gomess391 no
Podpowie ktoś czemu po oc ryzena 5600x na napieciu 1.30 programy testujące jak np CPU -Z pookazują skoki napięć, ale w dół np 1.28 ; 1.27 itp ? Czemu płyt nie trzyma sztywno napięć?
Bro i have 2666mhz ram but its capped to 2400 coz of ryzen5 cpu , should i overclock ?
same problem
on Ryzen 5 3600 (3200Mhz native) How do I mount 3200Mhz memory will it work on default settings?
3 years late but no... it worked for me with the 18-18-18-36. If u leave it on auto it won't boot.
What do you do with CH/ B timing?
please someone help me im gonna wait for ur reply listen: i went to advanced options then i went to ai tweaker but the Ai Overclock tuner option just dosnt show up im counting on u guy plz help
Brother on sata information my m.2 is not showing while on right when it says boot priority its showing any help
hi
asus gaming Fa506II bios ..advanced mod..al tweaker no menü...how do ı make this visible.
bios versiyon asus 304..
my pc use main asus prime B550 plus, ryzen 5 3600, ram g.skill 16gb 3600MHz, but can not run ram 3600 MHz, how to run ram bus 3600MHz
Can you please tell me what settings I should change to overclock CPU? I just want have around 4.7-5.0ghz on all cores for Intel 8700k. I have the same Mainboard UI. I don't want to go over 1.35V. Would be nice if system only uses it when needed. I do video editing. Thats what I need it for but I have no idea about overclocking. I have an corsair H115i water cooler.
Shouldnt you be on ryzen side for video editing?
@@BlGASH Yes but I bought the entire System 3 years ago for 700€ with Good components. I will switch to AMD when I have another 1000 bucks for Asus ProArt X570 and Ryzen 5950X. But until then I just want a bit more power.
Hardware monitor shows that cpu core voltage is 1.4 it is high
DOCP doesn’t show up for me
How do you record the bios?
What is your bios version
After enabling d.o.c.p. my computer turns on but with no video, and i cant go to bios settings
Same. It only started doing that to me after I upgraded from 3950x to 5900x. Asus tuf gaming plus (wifi)
reset your bios...to do that you have to unplug everything ( obviously) and in the lower right corner of the mobo for two pins that say "CLRTC"....with that in your sight...use a paper clip or screwdriver to hook up the two pins together so that it circuit breaks them...hold it for 15 seconds...
i know it's a month old comment but it might help somebody out there...
@@surenot4362 I did this. It reset my bios but once I set d.o.c.p. again, the same thing would happen
@@cbzeej well at least you can still boot your system...😔
@@surenot4362 Sorry for that. i feel your pain
helped a lot thanks!
Is this ASUS B350 PLUS? I have this MB and it can't handle G.skill Flare X Series 16gb (F4-3200C14D-16GFX) at 3200mhz. So sad because is such an expensive RAM.
M. Cuenca did you turn up voltage?
@@OwMyNuts Can not run my CL 19 4400er Ram :D cant run it with 3200MHZ @ 1.45 Stable need to go lower @ 2933 with AUTO ;D
Thank you for this video it is very helpful..
Perfect guide
You said your ram runs at 3200mhz at stock but on the right of your screen where it says memory it says your frequency is 2133mhz. Can you explain why it says 2133mhz instead of 3200mhz please ?
Rayyan Shaik because every ddr4 ram runs stock at 2133mhz you need to enable xmp (on Intel) or docp (on amd) to make them run on the right frequency and voltage
@@swoggo3712 ik had een vraagje. Ik begrijp eerlijk gezegd echt niet wat deze mensen doen met de voltage etc. Is het genoeg als ik alleen de docmp functie kies?
TSK ja is genoeg om op je normale snelheid te laten lopen dan is voltage al goed
@@swoggo3712oke bedankt voor je hulp
@@tsk3217 geen probleem succes :)
Hello .
I have this motherboard and on it we have mounted ADATA XPG Z1 Memory 8GB DDR4 3000MHz CL16 1.2 V and I have mounted Corsair Vengeance LPX Black 16GB DDR4 3000MHz CL16 1.35 And the computer does not start the board again but it is not present memory ram.
Do you know what I could do?
I’m guessing that u can’t have 24gb of ram installed
I've same issue. Please help
@@santutunga4369 Try to switch between them, put the ones with higher voltage next to the CPU and use only 2 boards and rotate them together.
I sent the 1.35 v ones to the store and I took a lower frequency of 2600 but of 1.2, all corsair and it works perfectly. And so you put the lower frequency ones in the first slot next to the processor. Good luck