How to install 10.1" Samsung Galaxy tablet as car stereo in a 350z

Поделиться
HTML-код
  • Опубликовано: 10 дек 2024

Комментарии • 65

  • @arnofebrianto2218
    @arnofebrianto2218 Месяц назад

    This is what i need to re use my Galaxy Tab , Proficiat , Greetings from Indonesia

  • @byron3176
    @byron3176 4 года назад +3

    Best tablet installation I've seen so far!

  • @scotthodgson7185
    @scotthodgson7185 5 лет назад +1

    Really good video ,,so going to get this for my z ,,.. will help me alot

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      Thanks bro!

    • @rfchodgson3595
      @rfchodgson3595 5 лет назад

      @@pntbllbxr hi just wanted to pick ur brain I am trying to hook up my wires but I am not the best at that and I don't know if I got the right one ur help would be most appreciated

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      @@rfchodgson3595 as long as you dont have the Bose sound system, follow these directions and you'll be good.

    • @rfchodgson3595
      @rfchodgson3595 5 лет назад

      @@pntbllbxr ya I have the boss lol got most off it but. Stuck at sum wires

  • @tboss6689
    @tboss6689 3 года назад +1

    just to be clear you split the 3.5mm jack in 2 then those 2 were also split again in 2 ? nice install btw

    • @pntbllbxr
      @pntbllbxr  3 года назад

      3.5 to RCA. Then the rca's were split because I had 2 amps. Thanks!

    • @tboss6689
      @tboss6689 3 года назад +1

      @@pntbllbxr 2 amps 2 channel each ?

  • @BigMikeDeeSqGuy
    @BigMikeDeeSqGuy 3 года назад

    My issue is that I'll have 3 amps 1 4ch for mids and tweets, 1 2ch for midbass and 1 2 ch bridge for sub how would I wire up the 3rd amp?

  • @MarioLopez-ew5rb
    @MarioLopez-ew5rb 5 лет назад +1

    I got a 350z with BOSE SYSTEM no navigation system would I be able to use that amp or do I gotta buy another one ?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      Should be able to. Just get the correct harness

  • @fair2ladyz370
    @fair2ladyz370 5 лет назад +1

    Correct me if i'm wrong, but isn't the yellow wire the ACC positive ignition feed, the red constant from the battery? because in my case i have two separate amps in the back on my seats on my Z, and i have to use the ACC ignition to send the remote signal to the amps and to connect the step down for the 5 volts on the Tablet. If you connect the Tablet on the red wire that stays on all the time, wouldn't that keep the table charging event if the car is off? (this will kill the Tablet battery) I'm doing my installation this weekend and i haven't try this but i could be wrong and it might be backward red is ACC and yellow is constant 12 volt?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +2

      Yellow is constant power. The tablet stops charging when I cut the power to the vehicle (the way it's wired in the video)

    • @fair2ladyz370
      @fair2ladyz370 5 лет назад +1

      @@pntbllbxr Thanks for the Video, this helps alot.. If your car is not on fire, mines should be fine. lol.

    • @fair2ladyz370
      @fair2ladyz370 5 лет назад +2

      @@pntbllbxr I was able to installed this on the weekend, let me ask you a few question,.
      How do you manage to keep the table charged all the time because it is only being charge with the ignition is on.
      2nd .. What are you using to wake up your table went it goes on sleep mode, as we all know we don' t have access to the power button?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +2

      @@fair2ladyz370
      -if you dont drive your car everyday, it will die. I drilled a small hole inline with the power and installed a button (made it out of the end of a pen, the part where you click)
      -There is a how-to video on brainiacs RUclips showing how to make the tablet always stay on while charging.
      -Once you fix those it becomes less frustrating

    • @fair2ladyz370
      @fair2ladyz370 5 лет назад +1

      pntbllbxr thanks for your response.

  • @litrix7482
    @litrix7482 Год назад

    Thank you so much

  • @KavanMavati
    @KavanMavati 5 лет назад +1

    So basically u using one port usb as accessories and charging? I have back up camera and stearing well controller. How do I connect to the tablet? Also how do I get digital dashboard on your screen. Are you using Bluetooth obd2?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      Yes, using USB to keep the tablet charged. Workshop 12 has a kit for you to keep your camera and steering wheel controls, check their website. And yes, using bluetooth ob2 for digital dashboard

    • @KavanMavati
      @KavanMavati 5 лет назад +1

      @@pntbllbxrthank you for your reply. yes I been talking to these guys I already ordered all my staff just waiting on the bracket to arrive

    • @KavanMavati
      @KavanMavati 5 лет назад

      What's the name of your digital odometer? It look cool

    • @KavanMavati
      @KavanMavati 5 лет назад

      I got all my kits I managed to connect audio. But how do I connect my steering wheel control and my backup camera?

  • @craigvanveenhuyzen6801
    @craigvanveenhuyzen6801 4 года назад

    I was wondering how does this work when making calls i guess ?

  • @timotayv7683
    @timotayv7683 2 года назад

    What kit for wiring did you do and can you send a link please . On the exact kit you did the install with

  • @mystic2k330
    @mystic2k330 4 года назад

    So can u use the kicker 1200 watt amp with my 2 12inch subs or do I need another amp

  • @DMV_L3GO
    @DMV_L3GO 4 года назад

    I need this with the s5e what you think? Anything on xda

  • @nopiscougar
    @nopiscougar 5 лет назад

    how much voltage do you get after splitting an aux into rca and then splitting it again into the 4 channel? if i remember correct, amps prefer to have 4v coming off the rca

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      Definitely not enough. I had to install 2 ground loop isolators to kill the hissing noise. If I were you, I would go with an active powered rca splitter

  • @DigDugDee
    @DigDugDee 5 лет назад

    Cant get audio out the speakers and connected it just like you had it any suggestions?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +2

      Tweak the gains/check all connections. If that doesn't work, take a 9 volt to every speaker wire and pop test them.... it may be a bad amp, blown fuse, ect ect

  • @nickwaah2702
    @nickwaah2702 5 лет назад

    good day. Any idea to get local radio through the bluetooth setup?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +2

      Yep, turn on the wifi on the tablet and connect it to your phone (make sure your phones hotspot is on)
      Then download any radio app, iheartradio, pandora, etc.
      That's what I did

  • @BIGD0GSHORTS.
    @BIGD0GSHORTS. 4 года назад

    What yr is that tab A?

  • @jordanchamberlain5937
    @jordanchamberlain5937 5 лет назад

    Where do you get the opening that holds the tablet? Like the dash trim that holds the tablet

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      It's in the description. From Workshop 12

  • @htcyesil
    @htcyesil 5 лет назад

    Did you Connect this with oem bose stereo or non bose

  • @brianromero9827
    @brianromero9827 5 лет назад

    How did you hook up the RCAs really confused about that

    • @brianromero9827
      @brianromero9827 5 лет назад

      Where did you plug rear sub RCAs? The amp or splitters?

    • @DigDugDee
      @DigDugDee 5 лет назад

      Ever figure this out? And is he talking about the OEM Bose amp?

  • @lakshman1864
    @lakshman1864 3 года назад

    Can put pendrive in another otg or not

  • @world-conectado2817
    @world-conectado2817 5 лет назад

    é qual a laucher você usou ????

  • @romansenger2322
    @romansenger2322 5 лет назад

    Do you have a Bose Sound System in your car? And can you still adjust volume with the steering wheel control buttons?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      I don't have the bose system, if you do it is really easy to bypass it. Yes, workshop 12 makes a kit for you to retain steering wheel controls. Email Tim at workshop 12 and he'll help you out

  • @NerdyMeathead
    @NerdyMeathead 4 года назад

    lmao you should show this to nissan to make fun of how much better this looks than their 2020 370

  • @gilbertdelgado178
    @gilbertdelgado178 3 года назад

    I need help plzzz

  • @alechestand1054
    @alechestand1054 5 лет назад +1

    You said that the amp has some problems overheating, after removing the bottom has it given you any problems?

    • @pntbllbxr
      @pntbllbxr  5 лет назад +2

      No problems at all after removing the bottom

    • @alechestand1054
      @alechestand1054 5 лет назад +1

      @@pntbllbxr Awesome, thank you! I'm planning on following your guide once i get my kit in :)

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      @@alechestand1054 awesome man!

    • @alechestand1054
      @alechestand1054 5 лет назад

      @@pntbllbxr What year is your 350z mine is an 04, and if I can I'd like to copy your amp settings

    • @pntbllbxr
      @pntbllbxr  5 лет назад +1

      @@alechestand1054 2003

  • @galvan9561
    @galvan9561 5 лет назад

    Daaaammmm

  • @brandonwillis7205
    @brandonwillis7205 5 лет назад

    Dude I would literally pay you to install this for me . Where do you live . Dm me. I’ll buy the tablet and the pieces i need i just don’t trust myself to connect everything correctly

    • @Wasgud
      @Wasgud 4 года назад +1

      I don't want to reply on the video maker's behalf, however, you should really consider just buying a unit that runs android like that! It's probably gonna be a little more expensive but it does mean that since it's all in one piece (mostly) you can take it to a workshop and pay them to install it for you :)