【DJI AVATA 升級3.5"】AXISFLYING AVATA3.5 UPGRADE FRAME KIT | C157-2 MOTORS | DIY 改裝過程|負載GOPRO試飛
HTML-код
- Опубликовано: 27 авг 2024
- 今集主要是記錄改裝及試飛 AXISFLYING 設計給DJI AVATA專用的3.5"機架及加強電機 C157-2 3750kv
AXISFLYING 官方改裝教學: • How to Upgrade DJI ori...
DJI AVATA 改裝Axisflying 3.5inch Frame kit
有需要可以查詢改装服務 機架馬達現貨供應
Axisflying AVATA 3.5 Upgrade Frame Kit
flysmart.bouti...
Webstore👆👆👆
大埔廣場2樓33街11號舖
flysmart.com.hk
WhatsApp wa.me/85296094293
#AXISFLYING
#AVATA
#路易斯
#航拍
#fpv
#cinematic
#穿越機
😮神人LOUIS, 我係fpv門外漢,但仍想講你嘅fpv飛行技術係你依部新改裝機上發揮得淋漓盡致💯💯💯😃😃
技術仍然需要繼續進步🤟🏾
大開眼界😮
睇你整又過癮,玩又過癮。😁
整呢部機,睇係過癮,整就好傷神,太多裝拆及電線重新修整花好多心機同時間😌
Looking forward to your more flying test
Thanks for your support 👌
✌1st Like
恭喜🎉可以得禮品一份
@@louisdrone 有咩獎😂 BTW 又拆又砌,都係為求拍好片比大家睇,辛苦哂,支持👍
哇
正👍👍
可以考虑😅
Nice flight in the end of the video😁 got this kit a few days ago. can you please share your rates?
請問一下 如果是電烙鐵新手的話 請問自己搞會很難嗎?!
有哪裡需要特別注意的嗎
新手初試電烙鐵的話,可以先買一些練習用的電路板,當正式焊接飛控板必須要快、狠、準,否則高溫長時間傳到晶片會很容易GG
hi, thanks for the amazing guide, I have followed all the steps but front 2 motors are not moving. on goggles it show propulsion and esc error.
would you please help.
Sorry to hear that, I think the mother board was damaged.
Hi Louis 請問呢度邊到黎?
係咪得返好少電用?
負重增加,續航力減少是必然的
my prop gaurds cracked were can i get another pair
I think this C35 gaurds are the same
【淘宝】m.tb.cn/h.Uqo5cDr?tk=oc0CdjrPWoq CZ0001 「酷飞FPV穿越机 快拆C35涵道圈圈机3.5寸 耐炸机架 支持大疆O3图传」
Not as durable as the original? How surprising!
點攪呀~路易斯本身係工程師?
唔係,只係由小朋友開始鍾意拆嘢裝嘢
我想問個sd card槽係唔係type c 插位隔離?搵人改去認唔到D位
係會封住咗sd card , 要用type c 過片
同埋有冇防跌電池架推介俾依個機架?
用過幾款都會連架帶電甩出嚟,用魔術貼索帶最好
Hello friend. Can I use C-157 3650kv motors in this frame? Thanks
Sure, but, If your c-157 motors are used, wire should not long enought.
@@louisdrone Ok. Obrigado
會唔會幫人改裝AVATA?我都想改,但唔識改,收費改機您會唔會幫我改?
去大埔Flysmart 搵專人改
马上可以改5寸了。
nice ... Rates?
如果改1804会不会好一点
我覺得6s 電源更好
did your battery get overheated? mine did not want to charge until it cooled down
never overheated
你套綠色螺旋槳頁係乜牌子呀請問?
【淘宝】m.tb.cn/h.UJf6nDc?tk=I6YudjM1DIZ CZ0001 「HQProp HQ DT2.9X2.5X5 DJI 大疆 Avata 桨叶 阿凡达5叶桨」
最大速度多少?😃
Hello, I want to buy the kit for my AVATA, but I’m from Brazil, I have a little difficulty translating the lines, but I read better with the writing. How was the USB input and the SD input? Was it worth the modification? Can you answer me here?
USB and sd card data transmission needs to be connected via an external plug
想問下改左呢個3.5 點樣傳輸Sd 卡資料 我插左個type c to type c 無反應
你試吓用USB-C
@@louisdrone 唔該哂🙏
那裏水塘
感觉怎样?
明顯力量提升了不少