Don't make this rookie mistake 🤦🏽♂️
HTML-код
- Опубликовано: 29 июн 2023
- Just one of those days in the " real life of a painter "I think I might have had something like this happen once throughout my 25 years painting but..... I was starving lmao 🤣 🥩🥨🌭🌮🍖🍕😋
Clear coat
www.amazon.com/dp/B0758YYDSH/...
Base blender/wet bed
www.amazon.com/s?k=TRANSTAR+%...
![Jelly Roll - Dead End Road (From Twisters: The Album) [Official Music Video]](http://i.ytimg.com/vi/_Mb8CqKW4R8/mqdefault.jpg)
Yeah man, this is why i watch you brother. The idea of clear base as a sealer is damn genius my man 😊. Gotta do that in the future, thnaks for that. My prepper has hands like George Foreman man, heaviest hands in prep for sure!
So many additional blend panels that have been done that i could possibly save now, Cheers Trigger 🎉
By the way, I was thinking clogged air horn or lack of reducer. So, I was wrong. Hot as balls there at the moment, fast hardener and all whooooo 😮
Good catch bro. Have an awesome weekend 💪😎🤙
Thank you brother, yes I have tons of tricks I want to teach but they are already being taken and remixed by "The Man" so I can't really show all the tricks that the real painters have died knowing. But once I get bigger I will show more untold tricks. 💪🏼 Thanks for your support have a great weekend ⛳🏌️♀️🏌️🏌️♂️
@thetriggerman954 so long as you know that we got your your back brother.
Man, your are getting bigger. Keep them coming. Thanks for sharing.
Another great video Triggerman, we all have them rookie moments from time to time and I’m vertically challenged to see I know exactly what you mean when painting those hoods and roofs😂
Lmao yea man. We see things differently from down here 😭 thanks Champ 🏆 💯💪🏼
Triggerman great video, I am learning a lot from your videos. I appreciate that you show the mistakes and how to correct them, on tv they make it look perfect like no mistakes ever happen. The Munsters is one of my favorite shows. I think you either use a fast or medium reducer instead of the slow for the clear, so its not flowing like it should. Thanks God Bless Triggerman.
Thank you man. Yes I have to show you guys what really happens out here. I refuse to to give you a false Mr perfect image. But I think the "TV" show might start showing screw ups because they see that you guys want to see how it really is in the life of a painter. And it was fast activator I used in the clear and let it sit for 45 minutes 🤪😭
Triggerman appreciate you showing the tricks and the lessons learned. I am old enough to remember Herman, Lurch and Gomer!
Lmao yea man forgot about gomer 🤣 and you're more than welcome. Thank you for watching 💪🏼
😂😂😂😂🤛🏾 I be in my glory moment when I eat so you definitely get a pass plus it came out smooth. Definitely remember the matchstick game too. Your A game is Indisputable Triggerman have a great weekend. 👍🏽🏁🏁🏁another win!
You too brother thank you. Have a good weekend. Don't blow any fingers off lighting fireworks 🎆🎇 🤠
@@thetriggerman954 🤣🤣🤛🏾
Triggerman, I remember touch up tricks. Still use them. Enjoying the channel, great information!
Thank you sir, yea those touch-up tricks can save our asses at times 🤠 thanks for watching brother 🫡
@@thetriggerman954 hey triggerman, how many turns out on the fluid on the LS 400, and the LPH 400 for clear? Also, are you shooting a full fan on both guns?
WS 400 I meant. Thanks brother.
@@eapauto WS 400 2.5 turns out. fan 1 complete turn in from wide open.
LPH 400 4 turns out fluid
fan wide open
Nice work I'm a new subscriber stumbled across your video I'm a shorter painter also we just have to come up with things and go with the flow hood and roof are the enemy for us LOL
Thanks for the sub man. Yes we are the underdogs but we rise above and make it happen💪🏼🫡
I like the tips and tricks ,you keep it 100 . It’s very educational encouraging. I think the rookie mistake is to much reducer in the clear
Definitely I don't know why that's even a thing. Like who started telling guys to do that lol
Paint the whole hood from one side hahaha that one got me
@@nocandopdx 🤗😉🫡
Trig you need arms like a gibbon to do them hoods 🤣🤣
Yea man I feel like a little kid trying to reach the faucet in the kitchen 🤣🤣
@@thetriggerman954 🤣🤣🤣🤣🤣🤣🤣🤣🤣
I'm 5'9 been catching hell since 92 I use like step stool.Rubber bottom so you don't slip like I did before rubber bottom 😂
Yes we used to use our bare hands wipe off any dust particles,, however we did our hands lightly over the surface
When you first started I seen the pigment in the clear which usually I dont so my opinion was in the reducer.
Yea it can happen from lack of reducer if the clear requires reducer. So you get half credit Steel 🤠
@@thetriggerman954 👍🏽actually meant hardener.
I have definitely had that happen, clear was hardening up in the gun for and was spraying all stringy and throwing chucks out into my clear coat, I never mix my clear while doing basecoat any more or stick it in warm water, I mix and spray straight away
Yea man. And that's normally what I do. But I fkd up there 😫😭🤣 mix then spray
@thetriggerman954 I am still in the learning process of this game, first car took me 3 years to get it right but winter always got in the way hence the long process and things always going wrong, the last car was my own car only took 6months due to paint colour match problem but finally got there, definitely need a bigger compressor when I move house
@@winnsautomotiverefinishing every job will get better and better. And a bigger compressor definitely helps 💪🏼
Great video! Agreed ambidextrous painting is a great skill to have
Yea man I had tennis elbow for a month I couldn't squeeze the trigger at all. I had to use my left hand. Thank God I would have been out of a job so it's definitely beneficial
As far as temp you are spraying in a crossflow door filter booth. I've experienced 115 + temps spraying in a downdraft with a roof intake. The roof intakes really get heated up. Birmingham Alabama here
Yes I've sprayed in them for 15 years. I'm very familiar. And my booth does go to 100 plus degrees in the middle of summer. Shot out Birmingham 💪🏼👊🏼
You're 100% correct though. It's just some of these guys are blowing smoke.
@@thetriggerman954 yes sir they are. I love your channel and you keep it real. Keep up the good work!
These mistakes happen to the best of us TriggerMan so don't go beating yourself up over it brother in fact I'm proud of you for putting the video up as a lot of painters only show us the good stuff but not you man you say it as it is👏👏🙏👍John UK
Thank you John, yes sometimes in think let me not put this video up before people think I don't know what I'm doing, but then reality hits me and says this happens to EVERYONE even if they don't show it on camera. Thank you John I appreciate it man 💪🏼
Love every video man. Would love to see you use like a 20 gallon compressor with the vevor gun to do a whole car respray.
You trying to set me up for the fail 🤣🤣
@@thetriggerman954 Nah bro, where I live the average size compressor is like 12 gallons but our power is 240 volt and can run 2.75hp with pretty decent cfm.
Hey Trigger
Follow up on the Apollo turbine system and 7700 gun for auto paint. Here's what I found out round one.
1.0 tip for base. Had Nason metallic med. blue Jeep color.
Laid down base slick but slower. I know Trigger likes fast, but this wasn't fast the way I had the gun set up.
Constant consistent air delivery. Low psi high cfm. Got zero dust specs(a first for me) the low psi wasn't stirring up the air and blowing dust around. Metallics even. Nice dull sheen. Smooth. No pops. Slow reducer with the turbine.
Clear coat. Hardly any nibs. Got sum texture in areas that i have to cut n buff. Was playing with settings. Couple runs when i moved in too close. Next time prolly not use high solid clear. Try thinner coats. Second round added a splash of slow reducer. Had med activator. Was hot. Needed slow.
Final thoughts: I love the clean result. Love the base. Love the low overspray. I don't mind working the paint slower to get results. I need to try a different clear and slow activator. (0.8 tip as recommended) See if I can get less peel. But i'm used to the cut n buff routine.
I'm not any kind of video producer, but I do have a short video showing the base coat. 40 seconds maybe. Just a quick walk around the old Jeep.
Turbine does have advantages to a garage painter or mobile guy. Got to work out the clear coat so I can buff less. I noticed I had a Lot of paint left and clear. So the material was going on the car. Not a lot of waste.
Thumbs up for me and how I have to work. Sorry about the long comment...
Sounds good Big Bear, I see You are having fun with that turbine. 0.8 is so tiny I Don't think it's even possible to get orange peel or runs out of that sucker lol
@@thetriggerman954 its tiny on compressor gun. I thought the same thing. But they recommend that size for clear. It does'nt translate to compressor gun at all. Whole different animal here😅
@@BearBudgetTurbine ohhh ok that makes sense. I was like dam .8 is tiny. 😂
@@thetriggerman954 yeah, its weird. If you used a 1.3 or 1.4 on this turbine it would probably be a mess of peel or runs. I know Trigger was thinking I should just hang up the gun if i'm running a 0.8🤣
@@BearBudgetTurbine weird lol
I’m with you on being vertically challenged to, man! Lol!
What line of products are you refinishing with?
Lmao we may be vertically challenged but we still can kick some tall ass 🤠 I spray ProSpray products at the shop. Base and clear. Works pretty good and base covers great.
@@thetriggerman954 Yea, I could tell right away that you use solvent base of some brand. I’ll have to look Pro Spray up, I’ve never used it personally.
I use wooden toothpicks for touchups they work great with that pinpoint........
At my work we have ladders that have a little platform at the top and wheels. So you can push them around and then when you stand on them they lock down. Mine be worth getting a 4ft one for tall jobs
Yea I keep saying I'm going to get something. But then after I finish the job I forget 😂
😯thanks for the tip your good you lol
No problemo bro 🤜🏼🤛🏼
I'm also vertically challenged, paint my hoods just as you did lol
So you feel my pain 😭😭
Yeah that's what we used to do paper matchstick, in customers would ask how to touch up, we told them matchstick, the torn end..
Good tips on being ambidextrous with the gun . You got high humidity in your spot also folks got to factor that in .
That's right brother and this isn't a temperature controlled booth so you have to adjust materials to work with your temperature plus humidity. Sounds like you been in the trenches 🫡
@@thetriggerman954 Nahhh Trigger , I got a couple of car's under my belt and that was in early 80's G lol ! Your skill is light years ahead of mine that's why i am back looking at cat's like you and Gritt,Underground,Pharaway, Sprayway trying to get back behind the gun for two cars and a few bikes . Thanks for the videos for real..
This was happen to me with the base coat and another time with bmw black 2, I had painted the rear bumper and after the fender at 30 degrees, the paint was starting to harden in my gun.....
Yea man it happens, especially if you live in a hot climate 😭
What product is the clear base coat? Appreciate you sharing your knowledge and experience!
Transparent LV-500 link is in the description. Every product line has their own version. And you are more than welcome. 💪🏼
In most systems you can also just overreduce your clear coat and use as a wet bed. e.g. - 4oz of RTS clear, add 6-8oz of reducer. Now you have a nice wet bed.
@@mcats8 so technically you would be putting base over clear coat?
@thetriggerman954 yes, but it is over reduced 150-200%, so it dries fast and has enough body for it to lock in that base. It looks and acts just like wet bed in the high dollar can.
@thetriggerman954 I usually take the left over clear from the first job (2-4oz.), overreduce it in my spray cup when done, now I have a RTS wet bed the rest of the day if needed.
Was it your gun regulator not open all the way versus the hose/dial regulator?
Nope 🤪
Triggerman another great video. wanted to ask you something i have never painter a car but i decided to see if i could do it i made a stupid mistake sprayed base coat instead of mixing reducer i mixed hardener and it's been 3 days the paint dried most of the places but it is still tacie. Any feedback what can i do thanks.
Dam bro. You might have to chemical strip that off. It's a product I think it's made by clean strip called air craft stripper. Nasty stuff. Put it in the sun or put a heat lamp or heat gun on it for a while and see if that cures it.
This happened to me , best thing I can say is don’t mix anything until you are ready to spray it
And that's normally what I do man. That's why I called it a rookie mistake. I knew better 😒
Fast reducer on a HOT AZZ day you get dust ! lol
😭
Clear started to harden up? I’ve done that with sealer
Yeah man 🤦🏽♂️
WELL DANG, What was u eatin Trigga?? 🤷 boooooyy it must've been summn good to make u forget bout da job. 🤣😂. TriggerMan ALWAYS keeps it 💯
Man it was a Greek chicken salad nothing crazy. The boss bus lunch every day. So I was sitting in the office in the AC eating. And was like oh yea I gotta clear the truck. Walked in the booth and was like oh I mixed the clear already 😒
Awesome 👍👍💲💲💲
Glad you enjoyed it 💪🏼
No activator or reducer in a high solid clear💪🏽
Close 😂
Nice recovery- that's why your the TriggerMan
🙌🏼
💥👍🏼
Had that happen to all slow activation not the same apparently
Happens to the best of us 🥹
Nice work
Thank you sir 💪🏼
Definitely going to 2000 my cars before last coat knock nubs off thanks for tip bro
Yes sir lemme know how you like it 💪🏼
Clear is drying up in the gun!
Video ain't over and still trying to figure it out 😂😂😂
Lmao no cheating SteelCity 🤪
That temp is crazy.
Man it's ridiculous. I could never mask a car in that booth.
Do you guys have Black or white primer?
No only light and dark gray
@@thetriggerman954 your paint system is interesting I think I heard you say the wet bed doesn't need to be reduced that's crazy. Man they have matches at family D. If you guys don't have family Dinero store I'm sure your Piggly wiggly store has them. Such a shame you don't have the black or white sealer but doesn't seem to slow you down.
@@kr2513 Piggly wiggly? 🤣🤣🤣 Man you must be in Georgia? We don't have no Piggly wiggly down here. And yea I can get matches anywhere I was saying that not many people smoke with them like back in the day so they were all over the shop. I'm not going to buy none for a touchup brush lol. And yea man all I really need is a light or dark gray sealer. This paint covers so quick it's all good. Of course they would help achieve coverage even better but it's not law to use them. And yes my wet bed is right out of the can no reduction.
What's ur gun setting and tip?
You tell me. I said it in the video 🤦🏽♂️
Yes sir the match stick been there
Salute the veteran painter Mickey 🫡
You need some Bootys Collins plate forms shoes you remember him 👍
Oh hellz yeah I remember him man he did have some wild shoes 😂😂👟👟
Set to long or not mix right
Bingo 😂
I think you mixed the clear wrong or not at all. My best guess
Mixed Clear wrong is kinda sorta right 🤠
Added activator twice?
Close as hell bro.
I thought the color blender needed the reducer…duly noted!!!
Some brands do, this one is doesn't I works great.
@@thetriggerman954 what brand you workin wit? I use the Speedo kote color blender.
Yo TriggerMan, I'm watching this clip for the 1st time and my guess is that you weren't using the rt tip possibly? Nevertheless, I'm staying to the end to find out so don't repeat the mistake. Harlem Ray watching 4ever.
Close Harlem Ray 🤣
Hmm id say hot in the both and the clear started to set up early
💯 💪🏼 yeahhh man 😭
Reducer instead of activator??
I was wrong...
Close 😂...
What's wrong? The diffuser on the fluid tip has clear build up. Take a razor blade and clean those slits
Nope guns were fine. Dam clear was locking up on me 😭
reducer to fast- temps to high
Basically yep. Jackpot 🎊🎰
Accidentally put fast activator?too much accelerator?
💯🥳 close enough 😅
You bet I know the old matchstick trick bro!
Salute 🫡 to the OG painter
You know one time I put everything together in the clear, but didn’t mix it and start spraying manI got me a big old run!!!!!! man
Damn 😩 you forgot to stir it? 😮 Now that sucks 😅
@@thetriggerman954 yes sir I feel like an idiot
@@tonymartinez15949 don't, I've done much worse. I'm just not going to say it. 😅
I think your clear was drying on your cup 😂
Yep 💯
L I K E 👍👍👍👍👍💯💢💯💢💯 🤩🤩🤩
Thank you for watching 👍🏼
No reducer
Lol I never use reducer In clear coat.
Yea that's me am 6"3 bro 😂😂😂
Lucky fucker 🍻🤓
Some clears on them hot days will get thick on you quick
Yea man it's happened before but That's usually if I have leftover clear and attempt to use it on a job later
No reducer?
Yes all ProSpray. Primer too. Whole product
Ohh reducer in the clear? No reducer in the clear if that's what you meant
@@thetriggerman954 Yea, that’s where I was going with that.
Idk what refinishing product line you use, but if a reducer is needed to change viscosity, that’s what I was thinking. You changed guns and had the same issue going on. Am I close?
Keep up the awesome content Triggerman!! We’ll chat again soon bro!!
W 400 lv4 #1 forever
4sho 4 life brother. It will be hard to beat those guns 😂
You didn't put any reducer in the clear 😅omg
🤔
Before I watch the end ima say you was spraying clear basecoat instead of the actual clearcoat or maybe you mixed the two products together used the clear base with clearcoat hardner or something like that.
Edit oh damn I was wrong. Lol bro you ate after you mixed clear? Nah cant do that 😂 still looks good those are the guns I use too not the WS though the LPH I tried the WS went right back to LPH.
Yea man I fkd up I was in the office in the AC eating lunch with the owner. That AC had me mesmerized 🙈 and yea so as you see I have both but it's something about that LPH that I just love so it's my daily go to gun. Thank you for watching. 💪🏼👊🏼
@@thetriggerman954 enjoyed it. Yea I have two of the LPH400 they lay the best clear they arent fast which I think is a good thing I like taking a little extra time on the clear so I dont have to buff. I also been using the newer 3M gun for my sealers and solid base coats the gun is east to maintain and extremely light it also lays sealer very nice give it try.
@@brainwashingdetergent4128 the LPH is pretty fast in my opinion especially with the 1.4 but it is slower than the WS400. Then you must really think the DV1 is slow. I fall asleep painting with the DV1 and wake up and I'm still spraying 😭
@@thetriggerman954 😂 nah Ive only ever used the 1.3 I've had several people tell me to do 1.4 and its a lot faster. We might not have the same DV1 myn is silver and its the DV1 plus has a very wide pattern so to me its a hoser a lot faster than my LPH. Also I offten use the 1.4 in the DV1. I only ever spray base with it and clear with the Iwata. I have an orange tip LPH for sealer and a SATA 3000 for base or sealer depending on weather but mostly ive retired both of them from sealer duty in favor of the 3M gun which I also spray some base with it all solids I use the 3M. Nothing in the world sprays clear like those Iwatas tho so that right there tells me you a master painter.
@@brainwashingdetergent4128 ohhh you are talking about the DV1 base gun. Yes that's definitely a winner.I was referring to the clear gun with the ç1 and c2 caps. Those things are slow as hell lol.
I think your air valve on the bottom of the gun was closed some
I wish 🤠
@@thetriggerman954 once you said the reason I immediately said to myself. Damn I've done that before too. The important thing is you caught it and took proper steps and procedures to correct it efficiently.
@@claytonparkhurst4328 dam you've done that too? Let clear sit in the gun to long before spraying it? 😲
@@thetriggerman954 not because I went to lunch but because I tried using left over clear from a previous job lol
@@claytonparkhurst4328 well yea I do that often that's normal shit for us in the trenches 🤠 just sucks when it's live on camera 😭
paint with dry wall stilts- ha haa
Yea I need something man. Go go gadget arms 🤪
The best touch up brush is take a cigarette butt, (which I hate!) anyhow, Peel the paper off and cut an 1/8 off with a razor blade, and Maaaaannnn, No BS, Those nasty ass things are only good for 1 thing, and that’s making a DAYUM GOOD TOUCH UP BRUSH…. Try it sometime!!!
A cigarette but what I'm the heck. Man I ain't never heard that one before 😂
@@thetriggerman954 No shish bro! My Pops showed me that years ago, and it does work damn good! Peel the paper off and cut the tip of it off, the filter part works good… Pro tip! Lol
@@tripleeathletics man I'm gonna try that shit, I'll snatch one from the body man 😂🤜🏼🤛🏼
@@thetriggerman954 lmk what you think! Things will soak up some damn paint too!
P.S. Get that damn PO Box Brotha!!! 😂
@@tripleeathletics 🤣🤣🤣🤣🤣🤣
You forgot to pray to the paint Gods before you started spraying.
🤠 for real because anything could happen. 🙏🏼
Ez dabbers
Glad you changed guns before doing the hood
Why is that? 🤔
I think the nidel was dretey
Nope 🤪
Sorry to pick on ya but I've painted 50 plus years I can do that in my sleep you should start from the center of the hood to you plus a whole lot more rookie mistakes
No sir. Hot day if I start in the middle and work my way out by the time I come around the clear would be drying up. Maybe in a different state, climate, product that might work for you but not for me. And no offense to you trying to pick on me. That was last season. Have a great weekend 💪🏼🍻
Rookie mistake Trigger???????? UNSUBSCRIBE!!!!!!😂😂😂😂. Professionals make mistakes everyday B. We all human. Only thing perfect is the man upstairs. Another great video. Never thought bout using wet bed as a clear sealer👍🏾👍🏾👍🏾👍🏾. Blessings bro
Professionals make mistakes?? Not on RUclips. You don't see these perfect paint jobs on every video? 😆🤠 Thank you for watching bro. Sounds like you've been watching paid in Full brother 😆
@@thetriggerman954 😂😂 they edit them out lol
@@lowride28s 💯💪🏼👊🏼
I’ll tell you what’s wrong. You didn’t use the Vevor
You probably right. I had to take a break from the Vevor. Those death threats were getting real. 😲 They was trying to JFK ole Trigger over the glass out of that gun. 🥴
To much hardener
Half credit 🤪
How tall is tigger man. Does trigger man have a trigger wife?
5'9" Trigger has a Trigger wife but trigger also has a few trigger girlfriends too 🤪 😉
Let's see, you mixed another batch and it sprayed ok? So you mixed the clear using wrong ratio? Something wrong with the mix since you had to mix another batch.
Edit: Trigger come on mang that's no rookie mistake, that's a trigger gotcha
@@nocandopdx tell me after you're done watching 😭
^
WRONG ACTIVATOR
Close 😉
It would just be heavy on your dam feet bro
🤔
That's what I talking about. Get a gun, get r dunn!!
4sho ✊🏼
Gun wasn't clean
I wish 🤠🤣