7:46. Just retrofitted my cruise control 2 weeks ago. All the warning lights came on and I thought I broke the car so havn't driven it since. Thanks for clearing that up for me.
Hi mate i have an e84 and really wanna do this. Problem is the scrib keeps showing as doesnt fit my car as obviously the scrib on my car has no cruise control leaver- did you just order one from same model as your car?
Hello I want to ask, my Z4 E86 2007 are without Cruise Control. There is no cable fitted. Can I install it myself? Any video or diagram how to do it? Thanks
Hardware controls the rear wiper. If you don't have the right switch board in the steering column, then you can't swap over stalks. I'm a tried and tested fail
Not bad video , but "the main event of the video (coding) " is missed , and its not public for the casual people... i know how to do and not need it... also the car may need to add Dynamic Cruise Control Module !
I've searched BMW DOCTORs videos and I can't find this part 2 video. He has his own retrofit video but he uses his Topdon equipment to code the parts. I'm sure there was one using NCS expert/inpa. But like I said I can't find it. Are you able to provide the link please George?
Enjoyed that video! Good presenting skillz 😎 Would it have been easier to get an e82 cruise control hardware? I'm a noob who wants cruise control on my 123d coupe I haven't done any research on the subject yet. As every other noob does I came to you tube first 🤣
Hello George. It is wonderful video. Thanks for it. I have Bmw 116i 2009 model. I would like to retrofit cruise control but I need stalk units. Where can i buy it? isn´t it possible to just buy a cruise control stalk and stick it into the original piece? I will be really glad if you can help me.
Thanks for this video mate managed to pull it off a day before a 1,000 mile drive! Well worth it for the price. Can't seem to get the cowling to fit on both sides, only clips to either one or the other. Did you encounter this issue? Real oem says it was used on my model
@@HkBgNuiB i have found a guy to do the coding. I have the main console bit with the stalk. How did you know what trims to buy is the only bit im stuck on? If you have a part number or a name to search id owe you one lol
@@jed7200 there is a bmw site online with all of the parts that are used across bmws, e.g. the 3 series and 1 series both share same cowlings and squibs in most cases. Before you buy the parts cross reference them with the part codes online to see if they fit your model I forgot the name of the name of the site I think it was called REAL OEM
Hello, I want to add cruise control to my e91 2006. My question is whether I need to look for a spider (combined switch by part number) or can I just find a spider from the year of my car and have it have the same rear wiper switch as mine, etc., everything is identical to So far I only have a switch for the cruise control and whether it can be coded with a computer, e.g. Autel, which has coding functions. Regards
I’ve just changed my squib and realised that it’s from a 3 series. Can I just swap over the control from the old one. I have also kept the original ribbon cables. Thanks in advance.
Hi mate this is a grate video and I have few question to clarify if you please. 1. mine Is 318d 2011 LCI fixing cruise is that straight forward ?? 2 . can the BimmerCode app used for code this ??
Does anyone know the part number for the lower cowl that will fit the cruise control Stalk? Or I heard there is a template bmw came out with on how to cut your existing cowl. Where might someone find either the template or bmw part number?
@@GeorgeAusters Ok no worries, its only because in the video you explain the process of recalibrate the steering angle sensor will be explained in part two that I think everyone is asking including me.
Hey George, really interesting and helpful video...nice one. One question, by adding the cruise control is there another plug/connection to be made as we're adding another function, or is the cruise control wiring already incorporated into the wiring loom? Cheers bud 👍
Hello George. I have a BMW 3 Series E90 and I want to do this to it, will it need coding/angle sensors sorting or is it as easy as plug in and it works?
@@GeorgeAusters I know that ACC can be retrofitted to an E90. Do you think it is possible to do on a 1 series? It would be a nice challenge for you to take, I believe you would be the first one to do it.
Hello George! At minute 4:50 you talk about swapping the wiper stalk pulling out the stalk itself and disconnecting the ribbon cable. Is just easy as pulling the ribbon cable? It seems to be quite hard and i'm afraid to brake something
@@GeorgeAusters i'm trying to retrofit the cruise control but i need the non automatic wipers stalk from the old piece. I'm only complaining about the ribbon cable, if is only needed a pull i'll pull :)
@@GeorgeAusters Hi, something bother me, maybe you can answer. Why you change the wiper stalk? and not change the cuise control stalk and you stay error free and code only the cruise control option . Regards.
Hi George and co…. I just had a questions. I own a 320d efficient dynamic that doesn’t have the cruise control. I wanted to retrofit a cruise control thus I purchased the unit and the new fittings. Would I need anything else ( such as the cruise control module etc) or is that all I need plus the coding? I hope to hear a response from either yourself or anyone else who knows about this query.
Hi. I need help. I need to know what version of the coding index you have on your car. I have MK60_87.C07 and the cruise control function cannot be activated on it. Did you do any SW programming?
Thanks a-lot for the video. Do you get any icon / sign on OBC screen when you activate cruise control after retrofit and reprogramming? I assume not, since it is not a default feature of the car?
George Austers never mind got it fitted and coded in my E82 following BMW Z4 Mods channel. Only thing that I did differently was instead of using the DSC_89.PRG file I used the DSC_87.PRG for my E82
You have to buy the right model (LCI or Pre LCI) and the from the right car. For example, my LCI E91 needed the unit from an LCI E91, i tried a pre LCI and still didn't work
@@GeorgeAusters thanks mate! Just had a delivery and turns out they only sent out the stalk/switch for the cruise control, i need the whole squib unit right?
Rear wiper do not work for me, if i use only front wiper, It work, E90 to e87. I try to coding all but don't work for me, can somewone help me? Thank for the video
Hi George, I did the changes. however, a message came on suggesting that there’s an error CC-ID 24 DBC Dynamic Brake Control Brake Assist Failed. Please advise on how to clear the code
Hi, did you have any issues after fitting the rear wiper stalk to the non rear wiper szl? What additional coding/programming steps were required to get this to work? I've just been playing with an e90 szl for my e81 and after swapping the stalk over it seems that the szl needs to be reprogrammed for this to work. cheers
I just did my retrofit today, and unfortunately after changing the wiper stock and all coding I have noticed that my indicators stock and wiper stock have been not working at all. I do believe it is to do with the compatibility, because I took out the steering angle sensor out of pre LCI 330d e90, and have put it on LCI 318d E91. So I didn’t even bother to try it out if the cruise control worked or not. I have read some treads on the net saying that the 3.0L have had adaptive cruise controls with auto braking etc. and 2.0 have had just the speed maintaining ability with no braking at downhills
I've changed my SZL but because it was from a used car the VIN doesn't match up so I can't calibrate the steering angle sensor. I've tried looking for part 2, the coding video, but can't find it anywhere. Did it ever get made?
You don't just add a new button, and it magically works. Obviously, it didn't work, so there's no part 2. You will need an additional module and maybe proximity sensor. "No coding was needed"😂😂
Bonjour, J’ai un soucis après remplacement il me demande de coder le DSC, Malgré le codage il reste toujours en erreur 5E3F codage DSC nécessaire. Que faire ?
i don't think is that easy, im trying to do the same installation for weeks now, and guess what... swapping ur wheel and cutting 2 wires is not what is all about... most of them forget to mention u also need the cruise control module GM5 which is not the same as the comfort module GM5 ... and sure connecting the steering wheel to the main DDE or the car CPU is easy... but that CPU has to talk with the GM5 cruise control module... and if u don't have it ... u will get ur acceleration blocked and killurself... so most of this tutorials are 50% of the job... you should also show us which modules do you have and how u connected that cruise module to the main cpu. in my case for example, i have the comfort white box e46 series right? but i also need the cruise control unit, to control multimedia and cruise control, while the steering wheel wiring to cpu is correct i have no cables (25 pins wires) that go to the cpu from cruise control... so i find it a bit weird this will work without an actual cruise control unit... just placing a steering wheel and connect 2 wires cmon...
Great video, but where is the link to part 2?
Before removing the airbag disconnect the battery!
7:46. Just retrofitted my cruise control 2 weeks ago. All the warning lights came on and I thought I broke the car so havn't driven it since. Thanks for clearing that up for me.
Hi mate i have an e84 and really wanna do this. Problem is the scrib keeps showing as doesnt fit my car as obviously the scrib on my car has no cruise control leaver- did you just order one from same model as your car?
@@jed7200 Your on about the extra little indicator stalk? I grabbed the whole unit out of a wrecked BMW X5.
Hi mate I can’t find the second part of the video?
Can’t believe how easy this is I’ll definitely be doing this!!!
🙌🏼
You should get a trim removal kit. They’re really cheap and avoid breaking some clips or scratching plastic stuff ...
Hello I want to ask, my Z4 E86 2007 are without Cruise Control. There is no cable fitted. Can I install it myself? Any video or diagram how to do it? Thanks
now 3 years later. did this work??
My favourite bmw doctors are mates. Us bmw owners are like family 😂
As asked below please always mention the torque settings out loud for us viewers
ok thanks, can the newer m sport steering wheel be retrofitted?
Be ambitious: retrofit the *ACC* from an E9X!
Nice, can u tell me that after coding rear wiper works?
Hardware controls the rear wiper. If you don't have the right switch board in the steering column, then you can't swap over stalks. I'm a tried and tested fail
Many thanks for the upload
Video was very informative
Keep the hard work up and keep posting videos
🔥🔥🔥🔥🔥
Thanks man
Not bad video , but "the main event of the video (coding) " is missed , and its not public for the casual people... i know how to do and not need it... also the car may need to add Dynamic Cruise Control Module !
Hi are all the bit plug and play
Nice work ! Part 2?
May i ask whats the torque nm for the steering wheel? Thanks
If you buy stalks without rear wiper functionality(sedan version) switching only old wiper control stalk wont work.
If you install stalks without rear wiper it still works tho, apart from rear window wiper.
And what is the solution? You can activate it somehow?
I've searched BMW DOCTORs videos and I can't find this part 2 video. He has his own retrofit video but he uses his Topdon equipment to code the parts. I'm sure there was one using NCS expert/inpa. But like I said I can't find it.
Are you able to provide the link please George?
hello, does this work for the manual e87 too?
This is on a manual
Ehh right damgeee keep its up mate BMW doctor and you only guys I watch sound man
How you code cruise control to work?
Enjoyed that video! Good presenting skillz 😎
Would it have been easier to get an e82 cruise control hardware? I'm a noob who wants cruise control on my 123d coupe I haven't done any research on the subject yet. As every other noob does I came to you tube first 🤣
This one will work with bmw series 1 116i 2008 hatchback ?
Hello George. It is wonderful video. Thanks for it. I have Bmw 116i 2009 model. I would like to retrofit cruise control but I need stalk units. Where can i buy it? isn´t it possible to just buy a cruise control stalk and stick it into the original piece? I will be really glad if you can help me.
Thanks for this video mate managed to pull it off a day before a 1,000 mile drive! Well worth it for the price. Can't seem to get the cowling to fit on both sides, only clips to either one or the other. Did you encounter this issue? Real oem says it was used on my model
Im doing about 600-700 miles per week in my X1 and have done for a year now. Looking into fitting this - recon this is easy enough DIY?
@jed7200 yeah man not too hard got all the bits for under 100quid including the coding from a guy with ISTA.
@@HkBgNuiB i have found a guy to do the coding. I have the main console bit with the stalk. How did you know what trims to buy is the only bit im stuck on? If you have a part number or a name to search id owe you one lol
@@jed7200 there is a bmw site online with all of the parts that are used across bmws, e.g. the 3 series and 1 series both share same cowlings and squibs in most cases. Before you buy the parts cross reference them with the part codes online to see if they fit your model
I forgot the name of the name of the site I think it was called REAL OEM
@@jed7200 use REALOEM I think ita called
Hello, I want to add cruise control to my e91 2006. My question is whether I need to look for a spider (combined switch by part number) or can I just find a spider from the year of my car and have it have the same rear wiper switch as mine, etc., everything is identical to So far I only have a switch for the cruise control and whether it can be coded with a computer, e.g. Autel, which has coding functions. Regards
Watch this: If You Own A BMW, You MUST Do This Modification!
ruclips.net/video/am8slripDw8/видео.html
Thanks :)
Anyone have the link to part 2?
Scoured BMW Doctors youtube channel and nothing on there, shame!
Hey George should not dis connect the battery b4 you start??
You should but it’s not necessary👍🏻
I’ve just changed my squib and realised that it’s from a 3 series. Can I just swap over the control from the old one. I have also kept the original ribbon cables.
Thanks in advance.
Hi mate this is a grate video and I have few question to clarify if you please.
1. mine Is 318d 2011 LCI fixing cruise is that straight forward ??
2 . can the BimmerCode app used for code this ??
Should of just swapped the cruse control stalk to the original scrib then just activate the cruse control with any bmw coding tool.
You can’t
What torque you had for steering wheel?
part 2 pls
I am interested in how you swapped the stalk, that is way harder
please show me what have you done to remove these codes caz i have the same problem now and i dont know what to do.
ok thank you for ur LIKE but i did not get an answer for my question. Do you have link for the rest of this Video or what should i DO ?
Hi, Where can I get the coding? Any tools that you used for coding?
were is part 2 please
Awesome! Is it possible to retrofit like in the video on my 116i e87 from 2006? I just need the stalk units and some coding?
Thank you!
I have bmw e90 316i it doesn't have cruse control I am not sure is it have the crues control system or not ???
Where’s part 2?
Hi mate can you please fixe this in my car?
?
Hi George, how do I code the DSC after coding the CAS and NFRM?
Does anyone know the part number for the lower cowl that will fit the cruise control Stalk? Or I heard there is a template bmw came out with on how to cut your existing cowl. Where might someone find either the template or bmw part number?
Hello, how can we get in touch with the guy that is doing the coding? Thanks
I got the part, i only need the coding.. cheers
No coding needed
Is this plug and play for an e90 without coding or does it need coding in to the ecu ?
Did you get an answer for this mate?
Do you have to disconnect battery to put squib in and wires
If the outer casing is like for like. I wouldn't need a new case
A lot of comments about part 2, what happened to it and where is the link?
There was no need for part 2
@@GeorgeAusters Ok no worries, its only because in the video you explain the process of recalibrate the steering angle sensor will be explained in part two that I think everyone is asking including me.
Hey George, really interesting and helpful video...nice one. One question, by adding the cruise control is there another plug/connection to be made as we're adding another function, or is the cruise control wiring already incorporated into the wiring loom? Cheers bud 👍
Already there👍🏻
Tks George
Hello George. I have a BMW 3 Series E90 and I want to do this to it, will it need coding/angle sensors sorting or is it as easy as plug in and it works?
This was plug and play pretty much
is this the cruise control with braking function
If you mean is it active cruise control then no it is not.
@@GeorgeAusters I know that ACC can be retrofitted to an E90. Do you think it is possible to do on a 1 series? It would be a nice challenge for you to take, I believe you would be the first one to do it.
Hello George! At minute 4:50 you talk about swapping the wiper stalk pulling out the stalk itself and disconnecting the ribbon cable. Is just easy as pulling the ribbon cable? It seems to be quite hard and i'm afraid to brake something
Easier just to change the whole SZL
@@GeorgeAusters i'm trying to retrofit the cruise control but i need the non automatic wipers stalk from the old piece. I'm only complaining about the ribbon cable, if is only needed a pull i'll pull :)
Use a small pic tool to help you disconnect it
@@GeorgeAusters Hi, something bother me, maybe you can answer. Why you change the wiper stalk? and not change the cuise control stalk and you stay error free and code only the cruise control option . Regards.
Where is the part 2 please?
Wasn't needed in the end
@@GeorgeAusters so basically you put and worked without any coding?
Did you need to install the module under the dash? Or is that only for adaptive cruise?
No I didn’t
Hi George and co…. I just had a questions. I own a 320d efficient dynamic that doesn’t have the cruise control. I wanted to retrofit a cruise control thus I purchased the unit and the new fittings. Would I need anything else ( such as the cruise control module etc) or is that all I need plus the coding? I hope to hear a response from either yourself or anyone else who knows about this query.
Should be plug and play
Hi. I need help. I need to know what version of the coding index you have on your car. I have MK60_87.C07 and the cruise control function cannot be activated on it. Did you do any SW programming?
Where is the flash relay located?
Thanks a-lot for the video. Do you get any icon / sign on OBC screen when you activate cruise control after retrofit and reprogramming? I assume not, since it is not a default feature of the car?
Where can I find part 2? I was more interested in the coding part of this.
Coming to youtube soon
George Austers never mind got it fitted and coded in my E82 following BMW Z4 Mods channel. Only thing that I did differently was instead of using the DSC_89.PRG file I used the DSC_87.PRG for my E82
@@victortescalona you got a link, want to do this for my e81
@@GeorgeAusters How soon bud?
Hi there just got a 1 series BMW is it possible just to get the cluster that goes on the steering wheel ?? Or a whole new steering wheel ???
Yes
Thank you would that be coded in ?? Where would the best place to get that from thanks for the reply cheers
Cluster switch on the steering wheel ?
I get a cruise control malfunction error on bmw f30 2015, any help ?
Hello. This can be done also on BMW X1 xDrive 2011 e84? If yes, can you give me more details, please? Thanks.
Yes
@@GeorgeAusters more details possibld please?
@@voicuchodan5355did you ever manage to do? Same car and looking to do it
@ unfortunatelly not. The mechanic was not available and I’ve quit.
Awesome! so when you swiched the wiper arm out with your old one it worked just fine?
No it didn’t.
You have to buy the right model (LCI or Pre LCI) and the from the right car. For example, my LCI E91 needed the unit from an LCI E91, i tried a pre LCI and still didn't work
@@GeorgeAusters really ? What did you do to make it work ? Coding ?
Can i use my old srs ring?
would this work on petrol ? e81 ? if i get a cruise control from e87 ? diesel
Yes it would
can you just install the cruise control stalk or do you need the whole thing?
You need the cruise control SZL so need the whole thing
Awesome
Thanks dude
Does the lower steering cowl trim from an e90 fit e87 fine? Thanks
Yes
@@GeorgeAusters thanks mate! Just had a delivery and turns out they only sent out the stalk/switch for the cruise control, i need the whole squib unit right?
@@garyho5176 Yes
@@GeorgeAusters thanks buddy, does the top part of the trim need to be replaced too?
@@garyho5176did you find out this?
Good 💪🏻
It rides on all classes ?
Hey man! Just a question, isn´t it possible to just buy a cruise control stalk and stick it into the original piece?
To retrofit it you need the cruise control SZL
Rear wiper do not work for me, if i use only front wiper, It work, E90 to e87.
I try to coding all but don't work for me, can somewone help me?
Thank for the video
I had an update video coming soon
@@GeorgeAusters ok ty, It Is possibile to code?
Hi George,
I did the changes. however, a message came on suggesting that there’s an error
CC-ID 24 DBC Dynamic Brake Control Brake Assist Failed.
Please advise on how to clear the code
Just need to calibrate steering angle sensor
Hi, did you have any issues after fitting the rear wiper stalk to the non rear wiper szl? What additional coding/programming steps were required to get this to work? I've just been playing with an e90 szl for my e81 and after swapping the stalk over it seems that the szl needs to be reprogrammed for this to work. cheers
I just did my retrofit today, and unfortunately after changing the wiper stock and all coding I have noticed that my indicators stock and wiper stock have been not working at all. I do believe it is to do with the compatibility, because I took out the steering angle sensor out of pre LCI 330d e90, and have put it on LCI 318d E91. So I didn’t even bother to try it out if the cruise control worked or not. I have read some treads on the net saying that the 3.0L have had adaptive cruise controls with auto braking etc. and 2.0 have had just the speed maintaining ability with no braking at downhills
Find out how to recalibrate the sensor here.... WHERE?
Didn’t need doing!
What torque should be applied to the 16 mm bolt?
60nm
@@GeorgeAusters thx mate
I've changed my SZL but because it was from a used car the VIN doesn't match up so I can't calibrate the steering angle sensor. I've tried looking for part 2, the coding video, but can't find it anywhere. Did it ever get made?
Would have been useful to link the coding video…
No coding was needed in the end
@@GeorgeAusters steering angle error solved itself?
You don't just add a new button, and it magically works. Obviously, it didn't work, so there's no part 2. You will need an additional module and maybe proximity sensor. "No coding was needed"😂😂
Yes, just need recalibrating
@@PetcuCezar sorry can you send me any name to any video to see how they did that ? 🙏🏻🙏🏻
Bonjour,
J’ai un soucis après remplacement il me demande de coder le DSC,
Malgré le codage il reste toujours en erreur 5E3F codage DSC nécessaire.
Que faire ?
👍🏼
🙏🏼
i don't think is that easy, im trying to do the same installation for weeks now, and guess what... swapping ur wheel and cutting 2 wires is not what is all about... most of them forget to mention u also need the cruise control module GM5 which is not the same as the comfort module GM5 ... and sure connecting the steering wheel to the main DDE or the car CPU is easy... but that CPU has to talk with the GM5 cruise control module... and if u don't have it ... u will get ur acceleration blocked and killurself... so most of this tutorials are 50% of the job... you should also show us which modules do you have and how u connected that cruise module to the main cpu. in my case for example, i have the comfort white box e46 series right? but i also need the cruise control unit, to control multimedia and cruise control, while the steering wheel wiring to cpu is correct i have no cables (25 pins wires) that go to the cpu from cruise control... so i find it a bit weird this will work without an actual cruise control unit... just placing a steering wheel and connect 2 wires cmon...
I never had to remove any modules, everything in this video was plug and play