Thanks for this video. Even though it is so simple, I probably wouldn’t have ordered the kit because I always expect there to be some sort of gimmic when it comes to these things. It seemed too good to be true but you gave me all the confidence I need to go ahead and buy one of these magazine kits. Thank you sir
very cool.. you made it look really easy removing the bottom of that factory clip. i just bought my first glock "26", and upgraded to the pierce +3 pinky extention, and it took me a while to figure it out..lol
To anyone having issue with these. There is flast/ left over plastic on the bottom, inside of factory Glock mags. Take some sand paper to it and smooth them out and they should work fine after that. An exacto knife may be needed if flash is excessive.
definitely glad i stumbled upon this video though, my G41 has the factory 3 mags it comes with , 3 of these extensions i’ll be great 😊 thanks for the video
Lol. If your spring ever gets weaker from use. You might want to question the quality of that spring steel. Anyway, good video. Just got one of these extensions and it seems pretty good so far. Of course i gotta use it to know how it actually feeds.
Nice quick to the point video on these bro.... Got a few in the mail from Midway today (the kit you assemble, same as in your video) ...not sure why I waited so long to get some, having had my Vector for a couple years now.........PS: subbed
Thanks! They are great mags - a bit on the pricey end but overall worth it. Check out some more of my videos if you get the chance and I appreciate the subscription!!!
I need to do an updated video with this mag - its been a while since I have even used it. But I did only load it with 25-26 rounds as I recall & it was SUPER tight to get all that in.
these are dope , me personally (personally) would rather carry the drum mag. looks goofy , looks unrealistic , and i’ll still carry reliable glock mags’ but never know how many bullets you need until the time comes and i’m not reloading in the middle of an altercation (don’t ask the life i live) anyone can get caught in a situation where you need more than the standard/extended mag capacity
+the308capital Oh man I know! Would LOVE one. My budget is just not ready for it yet LOL! Too bad by the time I am ready the government will finally declare guns and their owners outlawed and outlaws LOL!!!
@@VashPlissken45 Just found one at GlockStore. Can't wait to try it out! Other question - does your 21 have any side to side play if you shake the gun? This is the only Glock I've owned where the slide had a little play in it, but it's also the only one where the pig nosed frame doesn't fully touch the end of the slide so I'm thinking that's it. The few forums I've read say this isn't an issue but I've just never seen it before. Thanks!
@@UziNineMillomeetah Awesome man! Loads of fun literally! LOL! And I don't know of any play with mine. The only thing I had to do was Dremel down the finger guard some because it was killing my middle finger LOL! I wonder if you updated the action spring if that would help.
I am trying to see if this Kriss extension will fit. On a 50 cal conversion kit. They use the original 13rd magazine but the mag only holds 9 rounds instead of ten and just has certain cuts so I’m hoping it does !
Has your follower/spring ever get hung up where the extension and Factory Mag join? Mine has and some say file inside of mag or lube it. Is there a better way you know of?
+The Mosin Nagant Channel For sure Jeff! I got my recent one directly from Botach. The mags are about $25 and the kit is $33. You can get them pre-assembled for $67. But if you already have a bunch of mags or want to save a few bucks and have the leftover springs I say get the kit for sure. www.botach.com/kriss-glock-21-21sf-17rd-magazine-extension-kit/ Its a great deal! Thanks for watching man!
Very happy with these being available since my favorite gun is my nickel boron Glock 21 amazingly slick already this just adds to it I like it as much as my 19 a very happy with these being available since my favorite gun is my nickel boron Glock 21 amazingly slick already this just adds to it I like it as much is my 19x I firmly believe Glock is still the best out there why do all these companies try to beat them out when they just can’t do it
Hey, i just assembled mines and was wondering if your kit when finished wobbled. Mine is wobbling just a little tiny bit side to side from the middle of regular mag and the kit.
The spring it comes with on mine is so crazy tight I am not getting any play...not sure if your issue is a real problem. You may want to contact Kriss directly. Good luck!
@@VashPlissken45 been doing research and a brand called Taylor freelance makes a goliath xl 34 coil spring that is meant to hold 60 rds! Gonna get a ksi 40 rd mag and add the kriss 23 rd extension
Well I wish I could give you an answer but I dont have any custom base plates to try out unfortunately. Since the original plate goes on I would say not but again, I cannot be certain. Thanks for watching!
I think holster was a TR Holsters. trholsters.com/ The light is a TLR-Streamlight. I run this Glock on a Safariland holster now that has a lock. Thanks for watching!
Just break them down like a standard Glock magazine starting with the base plate but using the 2 pressure pads on each side. Then the whole thing comes apart. Thanks for watching!
Honestly I dont even know if they make them for the 9mm yet. If they do thats news to me - so you will have to do your research. Thanks again for watching!
+Brennan Jones I have not left the Beard Gang! That was some older footage :) I have quite a library of videos at this point - I have been constantly filming since 2011 and it all adds up! I am bearded up right now quite heavily :D Can't wait til you get that handgun! Cheers and thanks for watching man!
+MrLeonidas0001 "Tactical Adventure Lifestyle" Haha I paused when you moved the handgun down and I was trying to figure out if that was you or not! Stay bearded my friends!
Okay cool!!! And thank you for not saying happy holidays I can tell your not from Cali 😂😂😂😂😂. Merry Christmas to you as well. Stay safe and look out for deer!!
This guy was paid to do a commercial. He has a 30 round mag and both times only shoots 15 rounds then in the next shot he dumps about 20. Why take the time to do a video and not do a full mag dump? Does it Jamb? SOMETHING FISHY HERE
Hi! Thanks for watching! You sound unhappy with this situation. Let me sort a few things out. First of all, no one paid me to do the video. I enjoy doing reviews for free - occasionally I do get something sent to me to review which is nice. Not this time and the Adsense money doesn't hardly pay for gas. And I have bought several of these mags full price. Secondly, the KRISS magazine is designed to hold about 25 rounds comfortably and you can jam a few more in there if you like. I have shot about 26-27 rounds out of them but I dont usually do that just because the mags are harder to load and I find 20-25 rounds of .45 ACP in a single mag effective for training and also good to have in an active shooter situation. The mags work and are reliable. It just depends on how much you break them in if you like maxing them out. So you can either trust me or not - either way I am glad to own these mags and consider them high quality. Thanks for your time!
Because if you run a Glock 21 (a mans gun with a mans caliber) you will have a lot of magazines that can be easily upgraded with these. But its all good - we cant all think too much.
@@VashPlissken45 thank you for letting me know, still definitely gonna grab a 21 mag to try it because I'm pretty sure the 21 and the 41 share the same frame if I'm not mistaken, it's just a longer slide and barrel
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Gosh, assembly was way easier than I assumed. I will have to throw one of these on my wish list. Great vid!
Thanks! Super easy and glad you know that now! Get them before November!!!
Was already looking at the KRISS vector for my Glock 21 but you just tossed all my doubt out the window and secured my thoughts on buying it thank you
Solid mags for sure - thanks for watching!
Exceptionally helpful guide for the mechanically handicapped like me.
Awesome thank you!!! Safe shooting :)
Thanks for this video. Even though it is so simple, I probably wouldn’t have ordered the kit because I always expect there to be some sort of gimmic when it comes to these things. It seemed too good to be true but you gave me all the confidence I need to go ahead and buy one of these magazine kits. Thank you sir
Awesome! They are good mags. Good luck!
The next step is to connect as many of these as you can so you can have your very own 600 round clipazine
+Odood19 Exactly! And then even the Libtards could never even detach all of it for a full decommission!!!!
MrLeonidas0001 "Tactical Adventure Lifestyle" You can't ban that which you cannot decommission.
+Odood19 Right on!!! Same goes with my Tacti-beard!!!!
very cool.. you made it look really easy removing the bottom of that factory clip. i just bought my first glock "26", and upgraded to the pierce +3 pinky extention, and it took me a while to figure it out..lol
+handi camper Glad you enjoyed the video man! You are gonna love the Glock! Its easy to work with and the magazines are great! Take care!
To anyone having issue with these. There is flast/ left over plastic on the bottom, inside of factory Glock mags. Take some sand paper to it and smooth them out and they should work fine after that. An exacto knife may be needed if flash is excessive.
Thanks for the info!
Just ordered my G21 the other day. Can't wait to get it and throw these magazine extensions on it.
Man yeah you will be ready to rock :D
Im very happy with mine as well now both my glock 26 n 21 are packing
Awesome! You are good to go! Thanks for watching :)
Leonidas Knives & Gear does it work for a Glock 30 45Cal
Great mags and assembly!
+guns4funcajanajustin Hey thanks so much! Love running these in my Glock!
definitely glad i stumbled upon this video though, my G41 has the factory 3 mags it comes with , 3 of these extensions i’ll be great 😊 thanks for the video
Awesome! Sure hope they work out for you :)
Lol. If your spring ever gets weaker from use. You might want to question the quality of that spring steel. Anyway, good video. Just got one of these extensions and it seems pretty good so far. Of course i gotta use it to know how it actually feeds.
You might have a good point there! Thanks for watching!
@@VashPlissken45 have you ever used it with the full 30 how’s the feed
Nice quick to the point video on these bro.... Got a few in the mail from Midway today (the kit you assemble, same as in your video) ...not sure why I waited so long to get some, having had my Vector for a couple years now.........PS: subbed
Thanks! They are great mags - a bit on the pricey end but overall worth it. Check out some more of my videos if you get the chance and I appreciate the subscription!!!
How reliable is the mag with the full 30 rounds ? What site would you all recommend to get a reliable Kriss vector mag ?
I need to do an updated video with this mag - its been a while since I have even used it. But I did only load it with 25-26 rounds as I recall & it was SUPER tight to get all that in.
@@VashPlissken45 it’ll probably be best to use a mag loader
these are dope , me personally (personally) would rather carry the drum mag. looks goofy , looks unrealistic , and i’ll still carry reliable glock mags’ but never know how many bullets you need until the time comes and i’m not reloading in the middle of an altercation (don’t ask the life i live) anyone can get caught in a situation where you need more than the standard/extended mag capacity
Never used a drum mag on a pistol but you do you!
If u have a glock 20 10mm can I take apart the 45acp kriss mag extension and build it with my standard g20 mag since the 20 and 21 are the same size?
I think I have seen some 10mm mods on here - do some searches on YT Im sure something will come up. Thanks for watching & goodluck!
Great video, very informative and much appreciated
Hey thank you for letting me know! Glad I could help!
Now you need a KRISS Vector carbine to compliment that G21.
+the308capital Oh man I know! Would LOVE one. My budget is just not ready for it yet LOL! Too bad by the time I am ready the government will finally declare guns and their owners outlawed and outlaws LOL!!!
I been trying to buy some of these all year !! Sold out ! 🤦♂️
Yeah unless production gets ramped up you probably wont see them available again! Tough times ahead for gun owners. Thanks for watching :)
checkout Gunbroker! just picked one up fully assembled. Prices are high though. Worth it imp..
I got some direct from Kriss a month ago in 45
Dude I need this!
Its an awesome Glock upgrade man!!!
@@VashPlissken45 Just found one at GlockStore. Can't wait to try it out! Other question - does your 21 have any side to side play if you shake the gun? This is the only Glock I've owned where the slide had a little play in it, but it's also the only one where the pig nosed frame doesn't fully touch the end of the slide so I'm thinking that's it. The few forums I've read say this isn't an issue but I've just never seen it before. Thanks!
@@UziNineMillomeetah Awesome man! Loads of fun literally! LOL! And I don't know of any play with mine. The only thing I had to do was Dremel down the finger guard some because it was killing my middle finger LOL! I wonder if you updated the action spring if that would help.
Thanks this vid was helpful ❤❤🔥
Good to hear!
Love the video! Great channel!
+Jackson Allen Hey thanks I really appreciate the feedback :)
So would I need and extended magazine or this is the magazine being built?
You need a factory 10-13 rd magazine & this then extends that magazine.
Perfect , but how reliable are these mags ??
I still run mine from time to time & have no issues so far...
I would love to see a long term reliability test of this magazine but with the ammo price hike I imagine this will be tuff
I might actually re-visit these magazines next year! Subscribe to keep updated :)
Springs are ass. Failure
I am trying to see if this Kriss extension will fit. On a 50 cal conversion kit. They use the original 13rd magazine but the mag only holds 9 rounds instead of ten and just has certain cuts so I’m hoping it does !
Best of luck to you!
Has your follower/spring ever get hung up where the extension and Factory Mag join? Mine has and some say file inside of mag or lube it. Is there a better way you know of?
I haven't had this issue yet - maybe some light sandpaper in there might help. Good luck!
Sounds like you have a 10 round Cali magazine
I thought I was the only one this mag Is a workout to load I never use the Glock speed loader but I had to bring it out for this bad boy 😂😂
Oh yes the spring is TIGHT!
does the extension come with a baseplate or do you need the one from your magazine?
As I recall you can just snap on the original for "aesthetics". I will l follow up If I am wrong.
Does yours say "Patent Pending" above the Mag-Ex2 logo on the bottom underneath the 40th round count?
Mine is the 26 rounder and it just says "MagEx G30 - .45 ACP - KRISS SUPER V".
Merry Christmas!
Well needed video
Thank! Its been popular this year & folks seem to enjoy it :)
Excellent video!👍🏻👍🏻
Thank you for watching & glad you enjoyed :)
thank you.
Glad you enjoyed :)
I got sent in the .45 instead of my 9mm do u think I can just put the 9mm 17 rd on the .45 kriss vector ?
I would contact KRISS about that first.
Can I do this with a 40rd magazine or it's just for standard
The spring is designed to work with 25 rounds so I doubt that would work. Thanks for watching!
good vid keep working fam
THANK YOU!
That is super cool Justin. I need to get me a few of them. What is the price on one of those kits.
+The Mosin Nagant Channel For sure Jeff! I got my recent one directly from Botach. The mags are about $25 and the kit is $33. You can get them pre-assembled for $67. But if you already have a bunch of mags or want to save a few bucks and have the leftover springs I say get the kit for sure.
www.botach.com/kriss-glock-21-21sf-17rd-magazine-extension-kit/
Its a great deal! Thanks for watching man!
Very happy with these being available since my favorite gun is my nickel boron Glock 21 amazingly slick already this just adds to it I like it as much as my 19 a very happy with these being available since my favorite gun is my nickel boron Glock 21 amazingly slick already this just adds to it I like it as much is my 19x I firmly believe Glock is still the best out there why do all these companies try to beat them out when they just can’t do it
It is very hard to beat a factory Glock & they are so easily modifiable. Thanks for watching & happy shooting!
Ray Peterson I have a question???
MrLeonidas0001 I have a question
Can I get a glock 33 and do the same? Would there be any extra steps or will it work
As long as the 33 can take the G21 mags I don't see why not but I am not 100% on that. Good luck!
Hey, i just assembled mines and was wondering if your kit when finished wobbled. Mine is wobbling just a little tiny bit side to side from the middle of regular mag and the kit.
The spring it comes with on mine is so crazy tight I am not getting any play...not sure if your issue is a real problem. You may want to contact Kriss directly. Good luck!
I bought 2 and they both wiggle for me, but based off of the construction I have no clue how it wouldnt
Would the Kriss vector fit on the regular 30sf 10rnd mag?
I would think so since this kit just uses the factory mags & extends them.
What if I were to put the extension on a already 33 rd mag? Would the spring still work?
I would highly doubt that would work - this spring is strong but not designed for that kind of capacity either.
@@VashPlissken45 been doing research and a brand called Taylor freelance makes a goliath xl 34 coil spring that is meant to hold 60 rds! Gonna get a ksi 40 rd mag and add the kriss 23 rd extension
Do you know if this works with the Model 20? Mags are the same, right?
Sorry I cannot confirm but if does use the same mags I would have to assume they would! Have a Happy Thanksgiving :)
Where I can buy one??? 26 'round Mags for my glock21 45??
Last one I got was from Botach but do some Google searching and you could probably find a few good sources :) Best of luck and thanks for watching!
Do you get any jams at all?
Its been at least a year since I ran this mag (I have 2 of them) & I can't say I've had any jams or mis-feeds with them yet. Best of luck to you!
Comes with that small clip or u bought that aswell ?
Small clip? I don't recall buying any extras for this review.
Thanks ! has it f2f?
I haven't ran into any problems so far!
@@VashPlissken45 thx
Can u use a glock 43 magazin for a kriss vector extension?
Sorry I do not know maybe contact KRISS directly thanks!
Mine malfunctioned do you know the best way to take it apart?
Carefully pinch the tabs on either side & slowly pull apart keeping in mind the strong spring.
Can a custom base plate fit on the extended magazine?
Well I wish I could give you an answer but I dont have any custom base plates to try out unfortunately. Since the original plate goes on I would say not but again, I cannot be certain. Thanks for watching!
Have you ever had any malfunctions with these?
I unfortunately havent used these mags in the past couple of years but when I did - no problems!
Can I use that for a G30 Or G30s Since It Takes A G21 Mag ?
Makes sense to me! Best of luck to ya!
What light and holster are you using? Where can I get it
I think holster was a TR Holsters.
trholsters.com/
The light is a TLR-Streamlight. I run this Glock on a Safariland holster now that has a lock.
Thanks for watching!
How do I disassemble though I can’t find a video anywhere
Just break them down like a standard Glock magazine starting with the base plate but using the 2 pressure pads on each side. Then the whole thing comes apart. Thanks for watching!
The video but in reverse 😂
Thanks
Have a great weekend!
That one only can be use on 45 cal?
Yes but Im pretty sure there is a video out there about how to modify this for the 10mm Glock...thanks for watching!
If you find it let me know
Try this one ruclips.net/video/uQ8C0a7NXZ4/видео.html
MrLeonidas0001 Tactical Adventures Any link where i can buy a Vector Magazine for my glock 9mm?
Honestly I dont even know if they make them for the 9mm yet. If they do thats news to me - so you will have to do your research. Thanks again for watching!
Can I put it on an Glock 23 clip to use for my 40 s&w?
Sorry I wish I could help on that I would try to contact Kriss directly for that info.
Have a Merry Christmas!!!
Can you use an OEM Glock extended 33 round magazine with this conversion kit?
With this kit I doubt it because of the spring length is set to use with the factory 10 or 12 rd magazines. Thanks for watching!
I think they do. For the G17 33 round mag, but it only add 7 extra rounds. Could just buy a 50+ round drum instead
Where Did you get the mag from?
I think Botach? Not even sure of they are still in production.
How long did shipping take ??
I got this from Botach maybe a week!?
Leonidas Knives & Gear thank you!
Do the work for the g2c
Sorry - you'd have to ask KRISS directly.
what beam is that or flash light
That is the TLR-1 Streamlight & I think this one is 150 Lumens. Thanks for watching!
is there a reason this won’t work on a 40 cal?
Sorry I do not know the answer to that I would contact Kriss directly. I have heard these do work on 10mm though after being slightly modified.
Any jams so far from this mag?
I haven't shot with one in 1-2 years unfortunately but these did run pretty smooth while I did! Thanks for watching :)
maaan i want a fde glock frame soo bad.. of all the glocks ive own, and ive owned alot of them, ive never had the green frame :(
This is such a great color man just really makes the gun look good :) Best of luck finding one!
does it work for Gloc30? I heard it only works for the G21
Sorry not sure about that! Maybe check some online forums :)
As long as you’re running a Glock 21 mag you’re good. Won’t work with short mags.
You Shaved!? Haha loved the video! Can't wait till I can purchase a handgun through a federal dealer. Take care Brother!
+Brennan Jones I have not left the Beard Gang! That was some older footage :) I have quite a library of videos at this point - I have been constantly filming since 2011 and it all adds up! I am bearded up right now quite heavily :D Can't wait til you get that handgun! Cheers and thanks for watching man!
+MrLeonidas0001 "Tactical Adventure Lifestyle" Haha I paused when you moved the handgun down and I was trying to figure out if that was you or not! Stay bearded my friends!
would this work on my g19x ?
I believe you would have to get the 9mm adapter. Thanks for watching!
Where can i order the extension kit
I think I got this one on Botach...not sure where now! Good luck :)
Thanks now my AR 45 Pistol has 30 Round clips instead of 10 😎
These are awesome magazines thanks for watching!
Did you use the 10 round mag with the kriss extender?
The site says it won't work with 10 rd mag, but I dont see why not
Does it work for a Glock 30 45Cal
I am not sure I would contact Kriss directly for that info.
Can i do this with my 45 gap mag ?
Not sure - you may need to contact Kriss directly.
Can this be shipped to California
What do you think!? Lol have a good one!
😂😂😂
That is a lot of firepower in a pistol
Its awesome! Thanks for watching :)
First!
Great video.
+SupaEMT134 Thank you! I appreciate you watching and commenting :)
Quick question i have a kriss vector and i was told you can only use glock 20 gen 2 mags for it. Do those glock 21 mags fit it just fine?
I can't say for sure since I do not own one but the magazine upgrades run just fine in my Gen 3 model 21. Good luck & thanks for watching!
Would this work on a Glock 21 Gen 4?
If the Gen 4 uses the Gen 3 magazines then I don't see why not...
@@VashPlissken45 Thanks
@@jonahroybal5336 did it work ?
We’re can I find this at
Try Botach Tactical.
Is there a difference between the g21sf mags vs the g21
+Julian Sanchez Not that I know of - my Glock is the SF model and these are all I buy and use. Thanks for watching, commenting and MERRY CHRISTMAS!!!!
It didn't jam I need it bad
Its awesome! I have 2 of them. Thanks for watching!
Okay cool!!! And thank you for not saying happy holidays I can tell your not from Cali 😂😂😂😂😂. Merry Christmas to you as well. Stay safe and look out for deer!!
+Julian Sanchez Cheers from Tennessee :D
500th like!
Cheers to that! Thanks for watching :)
I’m the 800th like 2021
Cheers to that!!! Thanks for watching :)
100%
Thank you :D
This guy was paid to do a commercial. He has a 30 round mag and both times only shoots 15 rounds then in the next shot he dumps about 20. Why take the time to do a video and not do a full mag dump? Does it Jamb? SOMETHING FISHY HERE
Hi! Thanks for watching! You sound unhappy with this situation.
Let me sort a few things out. First of all, no one paid me to do the video. I enjoy doing reviews for free - occasionally I do get something sent to me to review which is nice. Not this time and the Adsense money doesn't hardly pay for gas. And I have bought several of these mags full price.
Secondly, the KRISS magazine is designed to hold about 25 rounds comfortably and you can jam a few more in there if you like. I have shot about 26-27 rounds out of them but I dont usually do that just because the mags are harder to load and I find 20-25 rounds of .45 ACP in a single mag effective for training and also good to have in an active shooter situation. The mags work and are reliable. It just depends on how much you break them in if you like maxing them out.
So you can either trust me or not - either way I am glad to own these mags and consider them high quality. Thanks for your time!
Why do people buy the extension kit, if you can just buy the extended mag🥴
Because if you run a Glock 21 (a mans gun with a mans caliber) you will have a lot of magazines that can be easily upgraded with these. But its all good - we cant all think too much.
+++++
+Snicke22 Thanks Niklas :)
Dose this work on xd
Sorry not sure but as long as it runs the G21 mags I would say so.
for a glock 19 i would use the 17 round magazine to build the kriss vect correct?
This extension is for the .45 calibers but can also be modified for 10mm too I have seen. They have a 9mm kit I'm sure.
My 41 only has a single stack 10rd, would i have to get the 21 mag, or should it still work with the oem 41 mag
I do not think a single stack mag would work with this FYI.
@@VashPlissken45 thank you for letting me know, still definitely gonna grab a 21 mag to try it because I'm pretty sure the 21 and the 41 share the same frame if I'm not mistaken, it's just a longer slide and barrel