Frigidaire Washer - Diagnostic Mode, Error Codes & Troubleshooting
HTML-код
- Опубликовано: 5 окт 2024
- ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
FFTW4120SW
FLCE7522AW
FLCE7523AW
FLCG7522AW
FFTW4120SW
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancev...
If we helped you, please support us and Subscribe to our channel!
www.youtube.co...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com..." - Хобби
For those of you like me who was having a problem with the machine not filling with water and going straight into the wash cycle just let the machine run for a minute or two. Apparently the machine is designed to do that "dry" cycle in order to guage the weight and size of the load. Just wait and it will start to fill
That's so stupid. Been fighting my damn new machine for half and hour. Thanks for this comment.
yeah but it's useless, I washed a single polo shirt and it used a full tank of water, there's no way to adjust the water level and this is BS
YOU JUST SAVED MY DAY🙏🏻❤️🙏🏻❤️🙏🏻THANK YOU SO MUCH!
Is there a way to stop the machine from the pre-wash spin to balance the load? It seems it throws the load more out of balance than anything.
Mine has a e2 code,I've tried to see if anything is closed through the hose but seems ok,where else should I check?
😢 mine too
I don't know what to do !!
I wish there was a book for dummies on how to repair the washing machine before calling someone professional.
Hi! I am having the E4 off balance error code. The drum fills with water and the agitator goes and makes a horrible winding sound and stops to agitate the other way some and then stops and drains. Any ideas?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Did you end up fixing yours? If so, what was it? Mine is doing the same thing.
Hi did you fix this problem? My is doing the same can you help me ?
So i i get the lid lock noise and E3 on first two its likely my lid or would it be my drain
What I need to know is how to get it to stop holding water in the softener dispenser
Did you ever figure this out? Im having this problem
This machine is a bad purchase. Staring sounding like a helicopter right after warranty ran out. Never finishes just keep rewashing. No wonder it was on sale for clearance
I did the spinning test and it only drains the water, it makes sound but the center area doesn't spin
Good explanation.
I don't have an error code but some of the controls dont work. I cant change the temp or soil or fabric softner. It does work.
Great video!! Is there a way to perform a factory reset on this washer?
Unplug it for 5 minutes
e4 code...did diagnostics...changed clothes around....the entire tub inside is wobbling really bad...please help...my warranty is expired of course!
Mine is doing this. Did you figure yours out?
Help full video.thanks
Happy to help. Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
What do you do if the washer is plugged in, but not powering on. Note no breaker has tripped, an washer is plugged in properly.
Mine is full of water and is on E2
Good morning thank you for this video how do I clear the error code for the fd code
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Hey Kraig, I am from Jamaica for you know where in the U.S. can I get a drain motor for my Frigidaire LB221 washer?
How to replace the drain pump
How do you check for stored error codes on the machine?
Hmm I got the same washer and at spin the drum huts and bangs then goes to e4 then rinse again...why???
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Did you ever figure this problem out? I too am having same issue
@@Appliancevideo 5:56
Im having the same issue. takes forever for a load to get through. sometimes I just have drain and spin
Where I put the softener fluids
hi am getting a bearing noise when the washer is in the spin cycle have you ever done a bearing change on one of these thanks
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Mine stopped spinning so I took out the motor and noticed that the C-clip that holds up the bearing had slipped down and the rotor wasn't sittin' pretty inside the stator. Once I slipped the c-clip back in place the washer motor worked fine. I have to say that this washer is made very well and I love the logic to the engineering. The drum stabilizers need a little help but besides that this baby should last a long while. Pity for the C-clip design. Good luck.
@@josephsopala7642 mine stopped spinning also. How do I look for the
C-clip? How the C-clip looks like? I really really love this machine and the are pretty expensive and I don’t want to buy another if I know is a simple fix. Can you help me? I also change the belt that broke. I have only have the machine for 2 1/2 yrs. Love the technology on it.
@@marielpiedra1898 I’ll try to put up a diagram later. In the meantime if this is actually the same problem I had then this is what you. Empty stagnant water into a bucket by releasing tube on drain valve. Then turn the washer on its side but not all the way. Put a box or something to hold it about a foot off the ground. Check to see if this is really your problem. Grab the wheel on the motor (the motor is off to the side not in the center of the drum) with the belt attached and try moving it up and down. It should not move that much at all and if you pull it down and see a little rust showing then the clip fell off. Next unbolt the motor from the drum. If you want to get it all the way out you’ll need to unravel all the wires to reach the connector tied up in a little plastic baggie. But if you don’t mind laying on the floor during the whole ordeal unraveling won’t be necessary. After you get the motor off unbolt the head of the motor housing and pull out the coil. On the top you’ll have to look for an E clip (basically a C clip but looks like an E) slide the coil back in place until you see a groove in the rod (shaft) where the clip fits. Fit it back in and close it up and get them clothes washed. My clip was warn and loose so I squeezed it back together to refit. You might want to just buy a new one. The cap may have slipped onto the groove in the shaft so it may be a little tricky moving into place. Good luck.
How is your washer doing 3 years later? still working good? @@josephsopala7642
hi, how can you reset errors from the display digital LED or clear them from the machine's memory? please how to RESET, thanks.
Where is the drain trap/coin trap located on this washing machine?
Mine says e5… what does that mean
Hola espero que me puedan contestar mi lavadora frigidaire Maxfil me marca
E 3
No se como quitarselo..
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
I think the problem for mine is when I hit temp during diagnostic. The drum starts spinning out of control and banging up against the walls of the washer
I have E3 error. I replace lock and switch still have error any suggestions?
When using the bleach dispenser, do you need to be on White wash mode or does Bleach also work with all other modes like Normal, Delicate, Bulky, etc?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Have an E1 error, what steps can I do to fix it?
My washer is leaking water at the bottom. What could it be? A sensor off?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
When the agitator checks the load and twists during the wash cycle is it supposed to go in both directions or only one direction? I think mine might be having an issue. Thanks
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
What does error code E3 mean ?
What if water is stuck in the softener what do I do
Hello did you ever figure out what to do?
So what do I do when E5 is on I really need help please...
How to fix E1?
Were you able to fix it? Have the same issue
Mine machine doesn't not spin in wash cycle but does at spin cycle
I’m having this same problem. Did you find a solution?
Does this machine washslow? I got it new and it washes slow.. is there a way to fix that or change it?
So my hot water inlet valve blew during cold weather and water was shooting everywhere for hours while I was at work. I replaced the inlet valve and now the interface is turning on but nothing else is happening. Trying to determine if I need to replace the user interface (turns on and light show but the three buttons to test is are not putting it in the mode) vs the electronic control (which I popped out and looked at and nothing visibly looks fried on it). Please help!!!!
The water probably got into the washer computer board and damaged it, so you will have to replace it probably.
How to switch the PCB on this particular machine !!!!!!!!!!!
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
What about E2 ?????
We’re you able to resolve the issue?
We are getting E2 and it’s behaving as if it won’t call to drain. It will spin if I make it manually but I have to drain the water into the sump pump. It won’t go on its own. We have replaced the drain pump, still nothing.
How do you fix a fd code? Just open and lock nothing works
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Tub to loose
Could you explain how to remove the cover lock (Fd)?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Hi the machine is on code F8 . I changed the water pressure switch and nothing is clogged but still not running. I tried reset and taking off the code. Not working. What should I do ?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
How do you fix E2?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I fixed that problem by re-leveling the washer. That simple. If that doesn't work try resetting by unplugging washer for a few minutes, plug back in and then open and close your lid for 6 times. Turn on and it should be reset.
how do i fix the E3 code
What’s a pcb
Too bad you couldnt' check the water valves....this is the first time I am using this machine...water will not come into the machine at all...it starts agitating immediately with the clothes bone dry and wads and bunches them all up...I have tried everything I know to do with this machine. Any ideas??
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I does a dry run when it first starts...its testing the weight and how much clothes are in the machine...after about two-ish minutes it will run water...its in the manual
@@canadianmom1975 YOU ARE THE GOAT! I have been losing my mind about this and this was the answer THANK YOU!!!
I did the trouble shoot. But the washer only starting to wash with out no water. Its only taking in water when i do a diagnostic test. Why is that?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
In test mode the panel shows E3 and is locked
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
@@Appliancevideo you have this canned response to everyone and literally haven't helped a single person......
What about 32 and the washer isn't doing any sound
Mine spins in one direction fine, and clicks when spinning in the other direction. Also- it fills with water in “tub clean” but doesnt fill with water in any other mode. And just goes straight into a wash spin
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
@@Appliancevideo I have the exact model, how do I find parts for it or the serial number for It?
@@Appliancevideo my control lock light doesn't come on, can you help find parts for that exact washer in your video?
It turn on a make a loud clicking noise
get the same error. E2
Como puedo reiniciar la?
Please send me the model number .my was erase.thank you.
Show me the pcb
Will not power up
E3?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Mine wont drain gets stuck and says E2 :/
We’re you able to resolve this problem? We are getting E2 and it’s behaving as if it won’t call to drain. It will spin if I make it manually but I have to drain the water into the sump pump. It won’t go on its own. We have replaced the drain pump, still nothing.
My fabric softener has water in it and won’t drain
Following
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
@@antonioyelder7448 hi, mine has been this way for months...I am now tring to fix it..any luck for you?
Mines is E1 need help
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
My Frigidaire washing machine is locked.. how do I open the door?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
E1 help
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
Espanol
En español please😊
WORST WASHER EVER!!!!
I will NEVER EVER spend my money on a Fridgidare appliance ! They are ALL trash !
How to fix the E3
How to fix the E1