4090 ITX Overkill - New Dan C4-SFX
HTML-код
- Опубликовано: 18 сен 2024
- Check prices on Amazon below
Noctua D12L: geni.us/T5L6yUs
NVIDIA RTX 4090: geni.us/xY6oY
AMD Ryzen 7800X3D: geni.us/DfRR7
AMD Ryzen 7950X3D: geni.us/BE58M=
ASUS ROG STRIX X670E-I: geni.us/qaXrU
Arctic P14 PWM: geni.us/5LrX5
Noctua Slim 140mm: geni.us/mg02AG
Dan C4-SFX: www.dan-cases....
Moddiy custom 12VHPWR: www.moddiy.com...
Is this the best new ITX case? I built an absolute monster inside it to find out.
need a new wallpaper? optimum.store/...
Video gear
Camera: geni.us/5YfMuy
Primary Lens: geni.us/pWnoPBr
/ optimum
/ optimumtechyt
/ only_optimum
As an Amazon Associate I earn from qualifying purchases.
I am so glad you're back to reviewing ITX cases it feels like its been awhile, love your stuff as always man! can't wait for more ITX stuff
don't think there has been many new cases tho right?
I think they all went on the back burner the second 3 slot gpu's became the norm
@@MrLincoln87 and with 3 slot GPUs manufacturers will adapt, there is loads of underrated microbrands out there and even hidden gems from aliexpress/taobao (Although i doubt Ali will review anymore aliexpress cases cause he said on stream that some of them never arrived.) Head on down to sff network and you can see builds on said less mainstream cases :)
7800x3d laughing at the 7950x3d right now
Facts
Crying with my 7950x3d😅
@@ghost15214 you can give it to me and stop crying 😂
Do you know the monitor he's using by any chance?
Yes but the 7959x3d is much much better as an all rounder cpu since the 7800x3d is only good for gaming and not much else
Well written and concise review. Thanks for keeping us up to date with the latest ITX releases
You're the best sff building content creator. Always inspired of your video, from content to editing skills.
Would like to check out some more SFX content creators, any recommendations?
@@Ka0ZltdSFF*
@@Ka0Zltd Relaxing SFF and MXC Build (idk if thats spelled right)
If you enjoy PC build content, you should check out Mr. Matt Lee's channel.
@@Ka0Zltd GGF Events has some insanely clean SFF builds you may enjoy. He's the overall GOAT builder IMO and deserves 4x the recognition.
I just find ITX builds which turn out fitting so nicely to be so satisfying
Hey I gotta say, you got me into this SFF PC biz and so far Im addicted. Swapped my O11 Dynamic for the NR200, super easy to build in. Convinced my friend to go with an all white NR200 build, gonna be mint. Thank you for your help in spreading the SFF knowledge!
In the same boat here switched from my O11 mini to the SSUPD meshlicious no regrets at all
very jealous when i see my partners nr200p next to my o11 air mini. crazy how much power you can fit in there.
Now, go to the next step and try to fit custom loop in your case. Man... it's not an easy task, but it's just damn satisfying. I'm stil trying to finish my Phanteks Shift, but that third radiator is "fighting" back. hahahah. Anyway, it just feels great to work with those SFF cases and the result is just awesome, clean and saves a lot of space.
Slim fans on top of an FE card was something I noticed with the 3080FE--the fin arrangement is perfect for catching external airflow, and when I put slims in my Ncase M1 before water cooling the GPU, the difference was night and day on temperature.
the airflow of GPU is totally wrong. Hot air is going down.....
@@asimovnicholas471 convection doesn't matter when you have mechanical airflow. No amount of convention will overpower your intake/exhaust fans.
@@warmachine5835 Got it,Thanks.
Watching the SFF build process, utilizing every nook and cranny of the ITX case is always something very special but the cherry on top is fitting RTX 4090 inside and it's almost cathartic.
Always the cleanest itx builds. Love it.
Been missing your ITX videos, keep them coming!
This is amazing, can't wait to see the comparison with NR200p max and A4!
Excellent quality work covering SFF, love the channel! You deserve all the subs
I always love these ITX builds. I currently have an ITX build and I'm planning on using one again in my next build, glad to see the cases continuing to improve their design with aspects like the GPU vent.
can’t wait for the liquid cooled 4090 build! Great content as always!
Gimme Gimme Gimme. Im waiting for him to give me the input i need to build it myself :)
You using the Arctic cooling fan in this case instead of some ridiculously overprice fan makes me so happy.
That's very impressive, I didn't think you would be able to get such temps with that setup, really cool stuff, no pun intended
My last gaming rig was built in the DAN-A4-H20 based on your review. I highly recommend Dan cases now.
Really appreciate, what you bring to the PC gaming community. Some people like modern sleek disgn and have outgrown the colorful rgb hotwheels look. It baffles me for years now how peripherals and general hardware isnt made to appeal to adults. Most of us that can afford high end gaming these days are people with jobs and family that don't want an eyseore.
I dont know why but I really like these dummy beefy ITX builds.
Bro your videos are unmatched man, I legit have to resist the urge to repost your stuff on my inst story
Small factor and on air. Can't get any better than that. Sexy build gg
finally another maxed out build. the completely water cooled sff is still my fave
Nice review mate! You got me hooked on SFF PCs few month's ago and now I'm building my third setup in tiny cases: Meshlicious, RAW S1, NR200P and special mention A09 HTPC case (3.8L) office pc with Pico PSU and 5600G. I'm glad I own the 3070 FE though, no clearance issues so far!
King of ITX !! looks amazing
No one puts out videos that i look forward to more. Another amazing one!
The P14 is an absolute beast for negative pressure use cases.
I love my Dan A4 H2O but damn this really takes the cake for compatibility
LETS GOOOOOOOOOO
I like building in ITX cases because it's a lot easier to find a place for them in a cramped desk is this is the BEST channel for ITX cases. Thank you for another great vid!
Finally, air-cooled sff with no riser, capable of large coolers and smaller, than NR200. Please check fitting different air coolers, especially Thermalright PA120
if its taller than 145mm it wont fit SS135 does
That's it. You've convinced me to go itx.
Gonna use the same case, cooler and PSU.
I definitely need to see this watercooled
This is my new case! Perhaps it would be interesting to compare D12L vs C14s in this case?
Yes you can fit 4090 in the Ncase M1.
Sent from my Ncase M1 4090 FE B650e-I 7900x3d c14S sf750.
What a great case you can't buy.
You are going to hit 1M subs very fast! I promise) Love this channel
still using the SF750?!?! that thing is just chugging along. I'm SO happy to see it can run the top tier equipment even 2 years after I bought it
the counter at the end of noise demostration... perfection.
Please go ahead with the nr200 comparison, that would be awesome!
I'm tempted to build something similar as my next build to upgrade from my current 2080ti system, but with potentially implementing Direct Die cooling, Ali has got me hooked on the SFF builds.
Thank you for this video. My last ITX build was an thermal disaster.. This build is solid. I´ve copied your setup with the 7800x3d for VR Flightsim gaming. Works great. Looks great.
I have one improvement: use the angled cable of Moddiy for the GPU. "ATX 3.0 PCIe 5.0 600W 8 Pin to Angled 12VHPWR"
Was wondering about that, is it angled up or down and what length did you buy?
DanA4 is just getting bigger and bigger with every model :D
Dan knocked it out of the park here. i love inverted cases for itx.
These look stunning, I hope we will be able to get hold of them in the uk soon!
Damn this is so good to watch.
Nice build. How long is the Moddiy custom 12VHPWR cable you have? is it Cable style. HD Single Sleeved ?
Babe wake up! New optimum tech video!
DAN Case H2O is just the best. 4090, 7800X3d with an aio. Sub 11L. Like it.
Definitely getting this case.
This case is out of stock everywhere 👺
drooling over this build. I cannot wait to build my first PC at the end of this summer. I will be using this as a reference build. I think starting with a 4090 might be a bit much for me seeing as its my first build, but thinking about a 4070. Will be using it for some gaming but primarily as a data science machine learning rig.
Another nice build, as always 👍🏻
Great Video @Optimum Tech Wich length did you choose for the "Moddiy custom 12VHPWR"
What length moddiy cables would you get for this build? Great content as usual!
+1
Can you tell us what length for the GPU cable?
Love this build
That SF750 takes it like a champ doesn't it? wow...
Your video's help me with my ADHD and from time to time I check if you uploaded something new. This is just perfect every single time. Thank you 🙏
Cool case, wanted to change my nr200p to this one. I would also like to see the temperatures inside the case and the memory temperature in heavy games (stress test)
Damn thinking an ITX build like this next. I'd mount it under the desk.
Under the desk? be careful, you may end with 700watt of heat with nowhere to go, or even recirculating into the case...but yeah, it can feel nice during that winter
7800x3d Formd T1 looks to be the ultimate setup
Wow.... That set up is exactly what I'd go for. I love noctua air cooling. I'm a fan boy
the absolute godking of pc builds, none other like optimum
Your curtains match the “Founders Edition” graphics cards airflow vents perfectly
Best compact setup ever!! Wow 🎉
And now that I finally got to the point of ordering one, it's discontinued. New version comming next year...
My next build right here!! Love this one thank you optimum.
clean af
I wish I waited for this release! I ended up with an NR200, but this gives me buyers remorse
Lol was just thinking the same thing.
YOOOO HE UPLOADED
We need this same build water cooled!! Great stuff!!
Hoping to see 7800X3D on 240mm cooler figures at some point.. Itching to swap my 9900K for one inside the M1 at some point this year, but i'd love to see concrete temperature figures before starting to plan everything out..
Also dying to see your custom mouse with the wheel in situ..
The 7800x3d will run cooler than the 9900k definitely, so if your current build can handle 9900k, you should have no problems.
my 7800X3D runs max at 50W in 4k gaming. I bet an boxed cooler would keep it down too.
Air cooling is glorious and highly practical
Best RUclipsr for competent and critical reviews. For me, same level as MKBHD but for cases, overclocking, gaming and lifestyle hardware. Thank you
Is it just me or is this guy looking more and more buff?
3:36-🧑🏻🍳😗🤌🏻
Felt like drifting through space with those tiny dust particles!
Dang it man. I hate how easily you can sell these SFF cases to me. If I wasn't in love with my current tower (and frankly if i had the cash) I'd absolutely already have checked some of these out. One day I'll join in on the SFF insanity :D
Gorgerous build
It would be amazing to have another video about the best ITX cases but 2023 version
The case (and review) we have been waiting for!
At last a creator that knows how to setup and a manufacturer that have made it possible. Gpu shroud out and cpu direct intake are the one ways to do the job properly. In AIO the back would be the exhaust and AIO could blow inside.
Really nice build, it looks amazing as well!
really like the feet design, never thought the panels of dan cases looked very nice though, even compared to other vented panels
Every pc you build is so damn sensational its insane.
That is the perfect pc
That noctua would be nicer in black. Anyway, great presentation (as usual)
This is really cool. I think now I know what I'll build for summer.
Patiently awaiting the 4080/4090 GPU ITX custom loop video...
Hope to see the m1 evo soon!
Best tech RUclipsr
Far from it. Inaccurate testing results and more worried about input latency than anything else.
I love this guy, the pc so compact which is nice 👍
I ended up building his T1 air cooled spec and it runs hot asf...
Waiting for the benchmark between other ITX cases :)
sick beefy build dude! and the PC looks fine
I hope you know that hot air goes up, so intake at the top would be against natural convection processes inside the case. So I wonder wouldn't it be better for temperatures to intake at the bottom\sides and exhaust at the top?
Would like to know it as well
Awesome as always ali great job 👌🏻👌🏻👌🏻
That's some spicy SOC voltage you got there
god I love this video
I can't find the noctua slim 140mm fan. Link takes me to Amazon which has all120mm
babe wake up new optimum tech video just dropped
That case looks so good