I want 1 but what i want more is a 4 5-5" p320 10mm polymer. Glock, Springfield, and smith & wesson have a 10mm striker fire polymer pistol. Hurry up Sig
This gun has the XL Grip module and plate for a optic, the slide & barrel are the same length as the standard P365, this version has ports cut out to help release gas, but I don’t think this gun is snappy, I have the XL Grip Module on a P365 standard slide.
@@bozscaggzz7475 trying to get my life together right now but definitely will within the next 2 years . Connecticut has high taxes and cruel gun laws .
@@bozscaggzz7475 I dunno if I wanna deal with meth addicts trying to eat my face or stay in cali and deal with out of touch libtards since both equally bad 🤷🏼♂️
How effective is a "compensator" that moves with the slide, and away from the mouth of the barrel, during firing? How does this "compensation" compare to just sticking with the additional length/weight of the standard XL barrel? Does Sig have actual comparative research on this that they are willing to share?
Ported barrels and comps blow gases up ⬆️ & after a few pistol shots the front sight, sight picture is diminished because the soot, smoke on the front. A rear optic may be a big asset.
I own other ported pistols with no issue. This one however I’m left with many questions. Does gas escape into the frame? What about heat? Will the frame eventually melt? This is somewhat confusing to me why this product was made like this
I think this another example of fixing something that isn't broken. So you trade barrel length for a comp? No idea what that buys me except for less velocity than a standard XL. I see people modding the shit out of these guns. To me the 365 and XL are carry guns...aka....tools. I have a few slicked up 1911s, but they are range toys....not EDC. I pick the 365 or XL based on where I'm going, what I'm doing, and what I'm wearing. On the other side, I'm waiting to hear the cries from someone who spent big $$$$ modding their carry 365 or XL who actually was in a self defense encounter, and has had their gucci gun impounded as evidence. To each their own, but this is something I'm not buying.
they dont. this is a soiboi fanboi gun. the first time anyone shoots this anywhere close to their torso they're gonna get gassed, and never carry or shoot it again. thats if the comp even works in the first place as you pointed out. Im almost completely done with Sig at this point.
There's plenty of reasons not to. Like excessive flash and noise or hot gasses and peaces of jacketing being flung around. Both can be a serious issue in small spaces and awkward positions. I have both comped and ported guns an they're great for plinking. However I've shot them enough to know I don't want either on a defensive gun.
I'm definitely digging this new pistol as I carry CCW with a P365 that has a swapped grip module from a P365XL but the only drawback to this fantastic pistol is this firearm is very snappy and lots of recoil, I've been trying to figure out how to machine my slide and barrel to make it ported like the original P365 SAS! I'd love to see some footage of this gun in action before I run out to purchase it, I want to make sure that compensator is actually making a big difference in the performance of these firearms.
I promise you it won’t. That is not a comp at all. Just slide cuts. I love the 365 but this is just lying about putting slide cuts on an extended slide to make it look like a comp
@@jrc79lou I’m sure it’ll work slightly as any openings will help redirect the gases especially since the barrel is shorter and recessed in the slide but it’s going to be nominal! I believe they would have far better results if the actual barrel was ported as well as the slide just like the original P365 SAS porting had!
I like that they have optic cut AND rear sights. Finally. I don’t like the gold bling. Unless the barrel is ported and I didn’t see it, I also don’t think the comp is gonna do much since there’s not much of a chamber for the gases to get trapped and need to vent up (normally the hole is big enough for the bullet but not for the entire barrel). ** It would have made more sense to port the barrel at the front where the comp holes are (like with some of the chunk port-comps). The aftermarket should get on this and make a longer, ported barrel.
I have a 365XL Spectre slide on a standard FCU, a custom stippled grip module and a true precision threaded barrel. I like it - so I'm not just trolling this. Sig must mean 'Comp' as in Competition because this technically is not a compensated pistol. Sure some of the gasses 'squirt' out of those milled slide cuts... but a comp usually has a barrel extension with ports to direct gasses in a direction that mitigates muzzle flip. The round is ahead of the expanding gasses as it passes those ports and they are still confined until the moment they can vent - usually upwards so there's more directed pressure to mitigate muzzle flip or rise. On the XL Comp the round is already out of the barrel and gas expands inside the end of the interior of the slide and has other directions to vent - not just upwards, so the effect is diminished. Now add that 3.1 inch barrel. What prevents that muzzle blast from blowing backwards and down inside the slide and cooking the polymer end of the grip module? Lastly while not a huge difference there's going to be a velocity drop going from a 3.7 inch standard XL barrel to a 3.1 inch barrel. In my case it would be going from a 4.3 inch(threaded) barrel to a 3.1 so there'd be a measurable velocity drop considering the i.2 inch difference. Considering what you give up for what benefit is achieved ... I'm a skeptic.
You the man on that. Wondered about and thought those same things. I'm wild guessing that you might get close to the same amount of comp effect just from the exiting gas pushing downward on a light extended further than the barrel. That gives me an idea, too. You might get some comp just by making the upper side of an extended light flat or even concave.
Imagine a P320 AXG Legion with this slide… with the comp cutout being the Legion symbol, and the rear sights not attached to the optics plate… PERFECTION
Love Love Sig you guys are true innovators, always working hard and setting new trends, not to forget the beauty in the pistols as well. SIGSAUER all day long
I own a Sig Sauer M400 Tread like the one on the left under the Virtus. I have kept it pretty much as is except for a few necessities (charging handle, light and stock) but I love it. My friend helped me name it Scarlett because of the red reflection off of the romeo5. Shit bangs.
Now that Sig has ditched the rear plate sights and opted for real rear sights for true cowitnessing are they going to upgrade the next gen of P365s i.e. P365X with actual rear sights for cowitnessing.
We all want the p320 in 10mm in a short barrel version and a longer version.we’ve been waiting way to long.sig please stop making us wait.we were promised a few years ago,come on sig the 10mm craze is in every company.give the people what they want stop making us wait.
I just watched a Henry rifle video, of course it's the same gun they've came out with every year for the last 30 years, and everyone was excited as hell, for some reason lol Come here, where sig is trying new shit, and everyone hates on them hahaha I love the internet
I just want the slide available for purchase. I have the p365. I can get the xl frame and the flat trigger. And it would also be nice if it wouldn't cost $600 if you guys decide to release it.
ruclips.net/video/StpV27tnVyM/видео.html I rented one at a range last fall. My first shot was a bullseye. It's a very nice EDC for a woman--shoots very soft.
I just placed an order with my local gun shop...hopefully they become available soon. I have a 365XL, with a tru precision barrel and micro comp. I love it, but adding the threaded barrel and comp you essentially now have a 4.2" barrel. It's length is now longer then my other main CCW gun, Wilson Combat EDCx9. Although the XL still is much lighter and thinner so easier to carry with lighter clothing. I'll be trading in my current XL as soon as the Spectre comes in.
@@nateb4543 They had a list price of $1075. So not that bad. Considering that by the time I added the comp and tru precision barrel on my current XL the total cost of the gun was in the $800 range. Plus I'll trade in my current XL when this comes in so I'm guess I'll pay around $400-$500 when it's all said and done. Just move my 407k over to it and it'll be good to go. I also have that new Wilson Combat 365XL grip module ordered, should be here early next week. I'll swap that over to.
How does ports on the slide compensate for muzzle rise I thought that the barrel would need to be compensated as this is where the gasses leave the barrel?
@@jamesgarrison5546 So, it’s the same footprint as a pistol with an actual compensator. But this one is built into the slide. So when the slide moves back, the comp becomes useless…
It looks nice. IMO I would not want the footprint of the 365xl without its standard barrel length. If I get an xl it’s for the longer barrel and increased velocity
Hey Phil, any idea when an adapter plate will be made for the 365 SAS slide assembly? That ft bullseye sight isn’t good. Love to put a red dot on it and not buy a new slide. Thanks.
Now, just make that slide available so us folks with standard 365’s can use all of our stock parts and make a compensated/optics ready gun
Precisely
Get aftermarket customized your way slides
Done!
From the future. We have it now. 🎉🎉
Okay, this is great.
Do this for the P320 and make the slides available for purchase.
@sigsauer yes please
I would purchase a compact version in a heartbeat
I want 1 but what i want more is a 4 5-5" p320 10mm polymer. Glock, Springfield, and smith & wesson have a 10mm striker fire polymer pistol. Hurry up Sig
They won’t do it because their frames can’t take the pressure😂
Right Springfield just released a 3.8 10mm
I'm sure they're working on it. You don't want to be dead last to that party. Too much $$$ to be made.
I would like a p320 10mm the size and dimensions to the p320 sub compact. A perfect size just like the glock g29 gen 4.
They have Grey guns custom 10mms...
Mabey in time
Oh dear god. Please release the slide on its own. I will own this so fast.
Sure would like to get that 10MM P320.
I'm loving the upgrades and the comp never much wanted the XL but now I need one..
This gun has the XL Grip module and plate for a optic, the slide & barrel are the same length as the standard P365, this version has ports cut out to help release gas, but I don’t think this gun is snappy, I have the XL Grip Module on a P365 standard slide.
Love the integrated comp especially living in a state where threaded barrell are a no no
You should move
@@bozscaggzz7475 trying to get my life together right now but definitely will within the next 2 years . Connecticut has high taxes and cruel gun laws .
@@JoeyB44 Come down to Florida. Low taxes and sunshine
Same. I hope they just sell the slide too.
@@bozscaggzz7475 I dunno if I wanna deal with meth addicts trying to eat my face or stay in cali and deal with out of touch libtards since both equally bad 🤷🏼♂️
Will just the slides be available?
Love this idea. Love how it shoots. As soon as I see one without the gold I'm in!
Roger that.
Thank the sig Sauer out of you, I lost the screws to my sight/slide plate and can't find them in stock. That rear sight is a golden change.
This is a gamechanger
This channel replaces the users Manuel. Very good information.
When are the barrel/slide combo coming for those that have a p365xl already?!
Would love to be able to purchase just the slide.
How effective is a "compensator" that moves with the slide, and away from the mouth of the barrel, during firing? How does this "compensation" compare to just sticking with the additional length/weight of the standard XL barrel? Does Sig have actual comparative research on this that they are willing to share?
Literally all I can think about since seeing this… I have so many more questions than I have answers
Ported barrels and comps blow gases up ⬆️ & after a few pistol shots the front sight, sight picture is diminished because the soot, smoke on the front. A rear optic may be a big asset.
I own other ported pistols with no issue. This one however I’m left with many questions. Does gas escape into the frame? What about heat? Will the frame eventually melt? This is somewhat confusing to me why this product was made like this
I think this another example of fixing something that isn't broken. So you trade barrel length for a comp? No idea what that buys me except for less velocity than a standard XL. I see people modding the shit out of these guns. To me the 365 and XL are carry guns...aka....tools. I have a few slicked up 1911s, but they are range toys....not EDC. I pick the 365 or XL based on where I'm going, what I'm doing, and what I'm wearing. On the other side, I'm waiting to hear the cries from someone who spent big $$$$ modding their carry 365 or XL who actually was in a self defense encounter, and has had their gucci gun impounded as evidence. To each their own, but this is something I'm not buying.
they dont. this is a soiboi fanboi gun. the first time anyone shoots this anywhere close to their torso they're gonna get gassed, and never carry or shoot it again. thats if the comp even works in the first place as you pointed out. Im almost completely done with Sig at this point.
Integrated comps are the future! No reason not too!
There's plenty of reasons not to. Like excessive flash and noise or hot gasses and peaces of jacketing being flung around. Both can be a serious issue in small spaces and awkward positions.
I have both comped and ported guns an they're great for plinking. However I've shot them enough to know I don't want either on a defensive gun.
Always finding a new way to take my money. Love the p365 keep the new stuff coming.
This gun has everything that I need.
AWESOME!!!! GOLD BABY GOLD!!!!
Sig continues to innovate.
Sounds great as long as it doesn’t make me blind when shooting in the dark
Kudos to Sig Sauer for bringing lots of new and innovative products to the community.
But does it work or a gimmick?
I have found my next gun purchase :) !
Just wanna buy the slide looks sweet
I'm definitely digging this new pistol as I carry CCW with a P365 that has a swapped grip module from a P365XL but the only drawback to this fantastic pistol is this firearm is very snappy and lots of recoil, I've been trying to figure out how to machine my slide and barrel to make it ported like the original P365 SAS! I'd love to see some footage of this gun in action before I run out to purchase it, I want to make sure that compensator is actually making a big difference in the performance of these firearms.
I promise you it won’t. That is not a comp at all. Just slide cuts. I love the 365 but this is just lying about putting slide cuts on an extended slide to make it look like a comp
@@jrc79lou I’m sure it’ll work slightly as any openings will help redirect the gases especially since the barrel is shorter and recessed in the slide but it’s going to be nominal! I believe they would have far better results if the actual barrel was ported as well as the slide just like the original P365 SAS porting had!
Absolutely perfect! I've been asking for rear buis for a while. The comp is genius as well!
It is not working compensator. All pressure will escape by large hole for barrel and non by 2 slots in slide. It will only get dirty.
@@trapperjohn8508 Exactly. Exit hole of compensator must be close to bullet diameter as much as possible.
that pistol wall is my dream
I like that they have optic cut AND rear sights. Finally.
I don’t like the gold bling.
Unless the barrel is ported and I didn’t see it, I also don’t think the comp is gonna do much since there’s not much of a chamber for the gases to get trapped and need to vent up (normally the hole is big enough for the bullet but not for the entire barrel).
** It would have made more sense to port the barrel at the front where the comp holes are (like with some of the chunk port-comps). The aftermarket should get on this and make a longer, ported barrel.
They should hire you as an engineer Mr. Helper
Agreed! The only one liking the gold are the bangers.
Amen. Loose the bling, and I'll wait for the reviews to see if the comp does anything. I'm not going to be the guinea pig on this one.
@@stevenmorgan8223 The gold is titanium nitrite. It's a little flashy, but serves a purpose as one of the most easy-to-clean firearm finishes ever.
@@stevenmorgan8223 the bangers...? No “banger” is gonna buy a $1200 gun......
Hell. Do I buy this now, or wait 2 months for the P365XL Spectre Comp Legion Nightmare Equinox, now with a new custom works coin? Never settle.
such a toxic business model in the industry
god forbid they release new products. boo hoo revolvers only
Why not both?!
This is gold
Very nice. Regrettably, it will probably be a very long time before I see one locally. Thank you for the video.
Beautiful. Clean. Simple design.
I love it. Been holding off on switching from my lc9s to a 365 but this did it for me.
still waiting on the p365 legion then you can have all my money sig!
So the barrel ends before the compensator starts?
I have a 365XL Spectre slide on a standard FCU, a custom stippled grip module and a true precision threaded barrel. I like it - so I'm not just trolling this. Sig must mean 'Comp' as in Competition because this technically is not a compensated pistol. Sure some of the gasses 'squirt' out of those milled slide cuts... but a comp usually has a barrel extension with ports to direct gasses in a direction that mitigates muzzle flip. The round is ahead of the expanding gasses as it passes those ports and they are still confined until the moment they can vent - usually upwards so there's more directed pressure to mitigate muzzle flip or rise. On the XL Comp the round is already out of the barrel and gas expands inside the end of the interior of the slide and has other directions to vent - not just upwards, so the effect is diminished. Now add that 3.1 inch barrel. What prevents that muzzle blast from blowing backwards and down inside the slide and cooking the polymer end of the grip module? Lastly while not a huge difference there's going to be a velocity drop going from a 3.7 inch standard XL barrel to a 3.1 inch barrel. In my case it would be going from a 4.3 inch(threaded) barrel to a 3.1 so there'd be a measurable velocity drop considering the i.2 inch difference. Considering what you give up for what benefit is achieved ... I'm a skeptic.
You the man on that. Wondered about and thought those same things. I'm wild guessing that you might get close to the same amount of comp effect just from the exiting gas pushing downward on a light extended further than the barrel. That gives me an idea, too. You might get some comp just by making the upper side of an extended light flat or even concave.
Imagine a P320 AXG Legion with this slide… with the comp cutout being the Legion symbol, and the rear sights not attached to the optics plate… PERFECTION
@Jimmy Pete - Well first Sig has to work out all safety issues with the P320, then it will be PERFECTION.
@@reachblowsdick7222 What are you talking about.
Just what we need another version of the 365??
I wish you guys would release the p320 in 10mm
Now that's more like it!
I just want the slide. Hope you make them available
Bastards! 😂 just got my 365xl few days ago I would of waited for this if I knew about it
Love Love Sig you guys are true innovators, always working hard and setting new trends, not to forget the beauty in the pistols as well. SIGSAUER all day long
Looking back, what happened to the P365 in 380 ACP?
Ammo crisis of 2020 probably killed that idea. 380 was nonexistent for a while
@@DLFerg0369 ok good for you. The other 99% of America wasn’t so lucky
@SIG Sauer, Inc You need to add the P365 and the P365XL to the Legion Series and make at least a P365XL Legion from the factory!
I own a Sig Sauer M400 Tread like the one on the left under the Virtus. I have kept it pretty much as is except for a few necessities (charging handle, light and stock) but I love it. My friend helped me name it Scarlett because of the red reflection off of the romeo5. Shit bangs.
I really hope they have the p320 comp on the way also 😁 need one for my channel SIG
I want this setup for my X-five!
I read “x-wife” lol 😂
Now that Sig has ditched the rear plate sights and opted for real rear sights for true cowitnessing are they going to upgrade the next gen of P365s i.e. P365X with actual rear sights for cowitnessing.
Can you buy the slide separately?
Are these the same exact demetions as the regular 365xl
How is it compensating gas when not attached to the barrel
We all want the p320 in 10mm in a short barrel version and a longer version.we’ve been waiting way to long.sig please stop making us wait.we were promised a few years ago,come on sig the 10mm craze is in every company.give the people what they want stop making us wait.
I want to try, amazing new innovation. I love Sig Sauer guns.
I just watched a Henry rifle video, of course it's the same gun they've came out with every year for the last 30 years, and everyone was excited as hell, for some reason lol
Come here, where sig is trying new shit, and everyone hates on them hahaha
I love the internet
I just want the slide available for purchase. I have the p365. I can get the xl frame and the flat trigger. And it would also be nice if it wouldn't cost $600 if you guys decide to release it.
Can we use this slide on a standard length XL barrel?
Unfortunately, no. That was an objective, but because of the tilt of the barrel, we couldn't make it work.
That grip makes it look like a keltec
i dunno about that. gas still not finish escaping when the slide/comp starts to cycle. some testing/slow mo video would be good here Sig....
Another gimmick to push their CUSTUM WERKS line.
Will the 507k X2 fit this pew
I'd like to see the P365 in 30SC and 380 auto
ruclips.net/video/StpV27tnVyM/видео.html
I rented one at a range last fall. My first shot was a bullseye. It's a very nice EDC for a woman--shoots very soft.
Will the slide behold by itself at a later time?
What's the difference between the mcx virtus pistol and the mcx virtus sbr?
I just placed an order with my local gun shop...hopefully they become available soon. I have a 365XL, with a tru precision barrel and micro comp. I love it, but adding the threaded barrel and comp you essentially now have a 4.2" barrel. It's length is now longer then my other main CCW gun, Wilson Combat EDCx9. Although the XL still is much lighter and thinner so easier to carry with lighter clothing. I'll be trading in my current XL as soon as the Spectre comes in.
How much did that cost?
@@nateb4543 They had a list price of $1075. So not that bad. Considering that by the time I added the comp and tru precision barrel on my current XL the total cost of the gun was in the $800 range. Plus I'll trade in my current XL when this comes in so I'm guess I'll pay around $400-$500 when it's all said and done. Just move my 407k over to it and it'll be good to go. I also have that new Wilson Combat 365XL grip module ordered, should be here early next week. I'll swap that over to.
Thats just a longer slide with slide cuts. How in the world is that acting or marketed as a compensator?
@sigsauer will the slide be available separately?
Surely you will sell the slide separately. I already have the regular and XL.
Will it fit into all my p365 holsters I already have? sorry I just saw it was a XL
What about the 365 in .380 that was suppose to be released last year ?? Any timeline on that
How does ports on the slide compensate for muzzle rise I thought that the barrel would need to be compensated as this is where the gasses leave the barrel?
The barrel is shorter than the slide, so the part of the slide that sticks out past the barrel replaces the barrel-mounted comp.
How does that 'Comp' work if it's behind the end of the barrel?
it's not, the barrel is 3.1" and that's the 3.6" length slide.
@@jamesgarrison5546 So…it’s a bigger frame for a shorter barrel…hmmm…
@@vincentqiao5930 yes. With ports
@@jamesgarrison5546 So, it’s the same footprint as a pistol with an actual compensator. But this one is built into the slide. So when the slide moves back, the comp becomes useless…
@@vincentqiao5930 by the time the slide is moving back the gas is already out the barrel.
I’ve three P365s. Love ‘em.
But ya best come out with an answer to the LCP Max.
Just tell me how much man, i like it
Gonna be a lot more than msrp soon they’re sold out everywhere
How about a compact slim gun to compete against the glock 48?! I would love to add a slim compact sized gun for my edc
Does anyone know if this can be purchased with a manual safety?
So when can we expect this slide in x-full size to pair with x-carry barrels?
Will this fit in a 365XL holster?
Will we be able to buy just the slide??????
Is this technology available for the 320,220 . Where is the catalog....
Why my brand new Spectre Comp feels loose in front between the slide and the frame? I can hold the grip and sake it feels not solid.
Do these for the 320 series! With a dang RMR cut !
The newer P320 optics cuts do accommodate the Trijicon footprint finally
Are you making a 365 in 30 super carry? I’d buy one of those.
Will you guys be making a p320 xcompact specter comp?
When will 10rd be available? Cannot find anywhere, barely available in 12rd on gunbroker. Unfortunately I live in NY, but I’d love to buy this asap!
These sold out nationwide first 10 days
Thanks, I got my FFL to buy a 12rd on and swap in 10rds for me. Running about $1200.
When will the rear sight be upgraded on the standard P365XL to the Comp version?
It looks nice. IMO I would not want the footprint of the 365xl without its standard barrel length. If I get an xl it’s for the longer barrel and increased velocity
I wonder how badly those comp slots in the upper could collect something gritty enough to interfere with function.
when can I purchase the slide? not the hun but the slide
Das es sick! 🔥
Sig/Phil - will it require a certain load to not get failure? Basically, is this reliable since most with have this as an edc?
When is the slide coming ????? I’ll wait.
Waiting on a 365 legion!
Ok that’s sick
Can you buy just the slide?
Where is the SIG P365 in .380 at?
Hey Phil, any idea when an adapter plate will be made for the 365 SAS slide assembly? That ft bullseye sight isn’t good. Love to put a red dot on it and not buy a new slide. Thanks.
Cheaper and more secure to mill it and directly attach the dot. $125--150.
Now we just need this same innovation on a carry option 320 and or the full size. SHOUT IT FROM THE ROOFTOPS WHEN IT HAPPENES !!!!!!
Happens oops
slide sold separately?
So which shoots flatter, the spectre comp with a shorter barrel, or a standard 365xl with a longer barrel? Seems like a gimmick to me.
So I can just buy the new slide with comp and put it on my current P365XL?
Very nice
Sorry, I just see two holes drilled in the slide and NO matching holes in the barrel. How does that even work?
How is that compensator going to help you if the barrel is not cut also?
The barrel ends before the comp cuts
@@stevenhayward2640 well isn't that precious an Innovative idea