Thanks for your video it helped me a lot. I just stop by to get some fuse for my car to Change blown fuse for my phone charger soon as I change the fuse my car won't crank or turn on I checked all my fuse's nothing was wrong with any of them I checked my batteries it was in great conditions. But it still won't start finally I decided to do some resaech on RUclips got your video soon as I just hit my replay it just started. Thanks again.
Is it normal that my car clicks when I try and start it??? It just go click and nothing I tried the relay like you said it worked I had to get a new one car started no problem but I went to the store when I came out it wouldn’t start again until I would manually do that relay trick under the hood!!!! Am I doing something wrong battery is new and all
I have a 2015 charger rt and I have gotten the battery , starter and alternator replaced plus got the grounds cleaned and it started fine for the first 2-3 days of getting that done and then it just started to do the same thing again where the car starts but it takes multiple times of me pushing the start button before it turns on , what should I do ?
I have an 08 charger and removed battery to charge when I go back to hook up it sparks a lot it looks like it wants to arch Can you give me an idea of what it can be please
Thanks for the video First there was no crank from the starter, i tried your way to connect both pins with wire and the starter begins to crank and keep cranking but the engine doesn’t work, any suggestions pls
2008 Charger, new battery, new starter, power at the relay, power to the big terminal on the starter, new relay. To ops check the starter, as other have demoed by pulling the relay and providing a "jumper" between 37 and 80. Nothing. Ohms check the "tickle" wire at the starter, get an ohm reading but not like a solid ground, with the needle pegging out. Is there anything between the relay pin and the starter?
try a voltage drop down test on the yellow/grey wire (that’s the tickle wire) see what the difference is if it massive i would replace the entire wire which involves taking apart the fuse box if you want to do it the right way but if not just solder (or use the solder stick things) if you still have the issue check the tranny range sensor. just because it doesn’t throw a code and it says it’s in park doesn’t mean it means anything. hope this helped
I have a 09 Dodge Charger 5.7 hemi & kept getting code p0303, swapped coils, new plugs, and fuel injectors. No knocking of any sort, just seems to be on limp mode then once I unplugged the battery it now won’t start, goes to but the all goes black but a red solid dot. Any ideas ???! Btw nice clean cut video
I’m having weird instances where it will take a will to get car engine to turn over, checked battery ,starter and alternator and all are checking out ok
Nice video bruh! I have this dulge magnum 2008, and the ignition light will not turn on, there is no light coming up on the ignition expect the door light only, what do you think can be the issue. Thanks for your video.
My 05 300c won't start, and i thought it was the starter. I replaced the battery and the starter and still no start. I will crank and stop as if the battery has no charge. While trying to start the car my girlfriend notice smoke coming from the engine ground wire on the passenger side of the rear of the engine. Any insight?
Hi my car is doing the same thing I have a 2009 dodge charger I replace the starter new battery new fuses I replaced everything new on it so could it be my starter or my alternator
Try to turn any audio of and try to locate the noise where its coming from. Sometimes warn out serpentine belt can make that noise or not securely placed bolts or cover good luck.
Nice video bro, My 2010 Dodge Charger when I try to turn it on the starter clicks and I take off the starter relay and connect the two wires where you said to connect them and it turns on everytime but when I put the relay back on it doesn’t turn on only a click from the starter. I also tried to switch the wiper relay and the starter relay but it’s still the same issue, thank you
not sure if you’re still having this issue but i was looking at the wiring diagram of mine and i couldn’t figure it out but just recently my transmission range sensor (neutral switch) was throwing a code. i haven’t tried replacing it yet but that could be the issue
My sons 2010 charger won’t start unless you jump across the 2 slots where the starter relay is located. Many of there Chrysler products have ground problems. Has anyone found out what fixes this issue?
![DRAGON BALL: Sparking! ZERO - Fused Warriors Trailer [BUDOKAI TENKAICHI Series]](http://i.ytimg.com/vi/84p4Lvyfyes/mqdefault.jpg)
Thanks for your video it helped me a lot. I just stop by to get some fuse for my car to Change blown fuse for my phone charger soon as I change the fuse my car won't crank or turn on I checked all my fuse's nothing was wrong with any of them I checked my batteries it was in great conditions. But it still won't start finally I decided to do some resaech on RUclips got your video soon as I just hit my replay it just started. Thanks again.
Thank you bub your info does help me alot honstley!
U were on point with this video 🤙🏾🤙🏾
Thanks bro
Can you also troubleshoot the turning signal?
can u shoot starter fluid up the intake is it cranks but no start
Does anyone know which relay in the front bay controls the AC clutch/compressor? Have a 2008 charger but its the same layout, manual does not say
Is it normal that my car clicks when I try and start it??? It just go click and nothing I tried the relay like you said it worked I had to get a new one car started no problem but I went to the store when I came out it wouldn’t start again until I would manually do that relay trick under the hood!!!! Am I doing something wrong battery is new and all
I have a 2015 charger rt and I have gotten the battery , starter and alternator replaced plus got the grounds cleaned and it started fine for the first 2-3 days of getting that done and then it just started to do the same thing again where the car starts but it takes multiple times of me pushing the start button before it turns on , what should I do ?
Will this work on a 2013 charger 3.6?
I’m working on my it’s a 2008 Dodge Charger but I don’t remember how the parts go back together (wiring)
I have an 08 charger and removed battery to charge when I go back to hook up it sparks a lot it looks like it wants to arch
Can you give me an idea of what it can be please
Thanks for the video
First there was no crank from the starter, i tried your way to connect both pins with wire and the starter begins to crank and keep cranking but the engine doesn’t work, any suggestions pls
Check ur compression
Did you turn on the igntion? I think that bypass will only crank the starter with or without fire to the plugs.
Is this the same for a 2012 ?
2008 Charger, new battery, new starter, power at the relay, power to the big terminal on the starter, new relay. To ops check the starter, as other have demoed by pulling the relay and providing a "jumper" between 37 and 80. Nothing. Ohms check the "tickle" wire at the starter, get an ohm reading but not like a solid ground, with the needle pegging out. Is there anything between the relay pin and the starter?
try a voltage drop down test on the yellow/grey wire (that’s the tickle wire) see what the difference is if it massive i would replace the entire wire which involves taking apart the fuse box if you want to do it the right way but if not just solder (or use the solder stick things) if you still have the issue check the tranny range sensor. just because it doesn’t throw a code and it says it’s in park doesn’t mean it means anything. hope this helped
Hello, I have 2010 dodge challenger foglight not working any idea please .
I have a 09 Dodge Charger 5.7 hemi & kept getting code p0303, swapped coils, new plugs, and fuel injectors. No knocking of any sort, just seems to be on limp mode then once I unplugged the battery it now won’t start, goes to but the all goes black but a red solid dot. Any ideas ???! Btw nice clean cut video
I’m having the same problem a long with my keyphob broke
Any updates?
I have Dodge Challenger 2012 I have problems crack up I just buy a new battery what could it be
I’m having weird instances where it will take a will to get car engine to turn over, checked battery ,starter and alternator and all are checking out ok
Nice video bruh! I have this dulge magnum 2008, and the ignition light will not turn on, there is no light coming up on the ignition expect the door light only, what do you think can be the issue. Thanks for your video.
That happen to me the same just hit the starter relay try to see if it works for you if not you need to replace them.
I have a question?
Very informative video thanks
My 05 300c won't start, and i thought it was the starter. I replaced the battery and the starter and still no start. I will crank and stop as if the battery has no charge.
While trying to start the car my girlfriend notice smoke coming from the engine ground wire on the passenger side of the rear of the engine. Any insight?
Did you figure out what your issue was
Hi my car is doing the same thing I have a 2009 dodge charger I replace the starter new battery new fuses I replaced everything new on it so could it be my starter or my alternator
could be the wires aswell and or the transmission range module
Fuse for mirrors 3008 charger V6
My challenger trying to crank but won’t start , I literally drove it like 10 mins prior to it not starting again 🤦🏽♂️🤦🏽♂️
Can you help me i have 2010 doge charger and there is a noise when the car starts but it turned off after few seconds
Try to turn any audio of and try to locate the noise where its coming from. Sometimes warn out serpentine belt can make that noise or not securely placed bolts or cover good luck.
What if the number 8 fuse starter fuse keep popping
Having the same problem right now
Sounds like a ground issue
My 2011 challenger gauge cluster shows push brake to start but won’t start. Please Let me know if you know how to fix it
I need help with my 07 Dodge Charger won’t crank
did you ever find out why
So my car wouldn’t start and then I watched this video and tapped the fuse and then my car did start !! So what does that mean ?
Bad relay.
@@aboutmyfathersbusiness8324 thanks.. this video really dis help
Nice video bro, My 2010 Dodge Charger when I try to turn it on the starter clicks and I take off the starter relay and connect the two wires where you said to connect them and it turns on everytime but when I put the relay back on it doesn’t turn on only a click from the starter. I also tried to switch the wiper relay and the starter relay but it’s still the same issue, thank you
That is odd. There could be a bad connection inside the fuse box assembly.
Did you ever figure this issue out? My car is doing the exact same
@@ryancanales2554 my 06 charger does the same thing. Did you figure yours out?
not sure if you’re still having this issue but i was looking at the wiring diagram of mine and i couldn’t figure it out but just recently my transmission range sensor (neutral switch) was throwing a code. i haven’t tried replacing it yet but that could be the issue
My sons 2010 charger won’t start unless you jump across the 2 slots where the starter relay is located. Many of there Chrysler products have ground problems. Has anyone found out what fixes this issue?
So what if my engine does turn over
If it turns over when you put power directly to the terminals of the relay then the relay is bad.
Ok m l arning