Intelligence is best illustrated by the practical application of knowledge. Real world, hands on experience makes that even more impressive. You are a genius my man! Thanks for sharing.
My husband wanted me to let you know that " you are a really kick ass teacher because no only do you explain what to do but you do it and film it. Thanks for the video."
Hello I have a 05 300c and I'm having start stalling issues, the car shuts off with check engine light pull up coses for camshaft sensor, crankshaft, and air intake I have replaced all multiple times ut I'll run for 1 day or 2 while driving seems it does not want to accurate at top speed and sometimes it does a hipcup then that's when check engine like comes on. Feel pump has been replaced, and filters, started has been check it good and tranmission good...do you know what can cse the car to keep reflecting the sensors are bad?
@@ClassySassy506 To many variables for me to diagnose,if it was me I would pull the check engine code they don’t lie if it says is the crank positioning sensor and you already replace it my guess is you got an aftermarket market sensor from a local autoparts store then I would get an OEM Mopar sensor and if that fixes the problem I would return the defective one to the parts store and get my money back , I had some defective parts from after market before but also had many good parts aftermarket it’s a hit and miss I guess.
If you did everything good then I would go under and check the thin wire on the starter make sure is not loos or disconnect it, if that's ok the remove starter apply power directly if it doesn't run then you need a new one.
Disculpa amigo mi carro no arranca no da nada esta muerto pero si prenden las luces del tablero todo funciona exepto la cajuela no abre ni el clatson cheke los fusibles y el relay y estan buenos cress q el swich podria ser el problema
I still have the same problem sometimes it starts sometimes not. Did you figure it out ? I think the ground wire and connectors on the starter needs cleaning.
Or it could be your wireless control module receiver which for 2005 Chrysler 300 touring edition they no longer make so what is a person to do about that?
The best explanation on this matter on RUclips. Lets get this man to a million.
Intelligence is best illustrated by the practical application of knowledge. Real world, hands on experience makes that even more impressive. You are a genius my man! Thanks for sharing.
My husband wanted me to let you know that " you are a really kick ass teacher because no only do you explain what to do but you do it and film it. Thanks for the video."
Glad to help.👍
Definitely a great teacher...I had no clue it was that simple...preciate the video and keep making them bro...
I lovvve you i been searching for the problem for five hours and I watch your video and the car work
❤❤❤❤❤❤
Glad I could help
Thanks brother, helped tremendously. Appreciate your time.
Thanks I got the charger going. One question and wat if that housing isn't broken then what
Si whats that little peice you about to install in it?
Hey great video. I have one that starts fine but not shut off… any ideas?
Not really sounds like a bad ignition switch like a broken switch pin but hard to tell without taking thing apart, good luck.
Thank you for posting this!!
Great Hack and Repair Info 👍🏾
Good shit I’m not stranded no more 😂😂
Thanks, you saved me a lot of money.
Hello I have a 05 300c and I'm having start stalling issues, the car shuts off with check engine light pull up coses for camshaft sensor, crankshaft, and air intake I have replaced all multiple times ut I'll run for 1 day or 2 while driving seems it does not want to accurate at top speed and sometimes it does a hipcup then that's when check engine like comes on. Feel pump has been replaced, and filters, started has been check it good and tranmission good...do you know what can cse the car to keep reflecting the sensors are bad?
@@ClassySassy506 To many variables for me to diagnose,if it was me I would pull the check engine code they don’t lie if it says is the crank positioning sensor and you already replace it my guess is you got an aftermarket market sensor from a local autoparts store then I would get an OEM Mopar sensor and if that fixes the problem I would return the defective one to the parts store and get my money back , I had some defective parts from after market before but also had many good parts aftermarket it’s a hit and miss I guess.
What happens if it don’t start sir? I jumped the wires but not start
Ever figure it out? Mine does the same thing
@@davidbryant5875 I replaced fuel pump battery, crank position sensor, camshaft sensor, and mine still idles rough but it runs
@@davidbryant5875 I thought it was a throttle body issue but I replaced that as well and nothing changed
@@THEODINOFFICIAL try the erg vaule
@@THEODINOFFICIALo2 senors 6 in total
Great info thank you very much!
Mine leaks transmission fluid once I pour into it ?
You got a new subscriber my G !!! I was having a problem like this. Can you help a Tongano out?
Am I tripping or he said 87 not 87a and then still put it in 87a ??
Hello, where is the fuse traction?
Thanks man. Great info.
I did that pin jumper wire, just clicks same problem. Sometimes when I move the shifter or rear brake lever it starts
I’m at the same boat currently thinking my starter is bad
Thank you... worked Perfectly for me..
I did the jumper cable thing you mentioned and it did not crank. Could it be the starter?
If you did everything good then I would go under and check the thin wire on the starter make sure is not loos or disconnect it, if that's ok the remove starter apply power directly if it doesn't run then you need a new one.
What's the name of the part I'm having the same problem
It's called the ignition switch actuator pin.
I tried that and it worked later I tried that and the paper clip got real hot no stop or sound?
Never use any other metal to jump ,use copper cable.
The paper clip works but if takes long it will get hot and burn you ,depending how fast it turns on.
I tried with the paper clip the paper clip got extremely hot & blew out my 20 fuse
Disculpa amigo mi carro no arranca no da nada esta muerto pero si prenden las luces del tablero todo funciona exepto la cajuela no abre ni el clatson cheke los fusibles y el relay y estan buenos cress q el swich podria ser el problema
Cool I got the charger going thanks .but wat if the ignition that covers the plastic stick not broken
Same car same issue but it will not jump start from that 30 to 87 relay? Why I have new ignition switch new actuator pin still will not crank
I still have the same problem sometimes it starts sometimes not. Did you figure it out ? I think the ground wire and connectors on the starter needs cleaning.
@@thrashingmetal it was my starter well solenoid but u cant replace that alone.
I tryed this it crank but wouldn't start any idea what might be the issue??
Try testing your camshaft position sensor 👌
Or it could be your wireless control module receiver which for 2005 Chrysler 300 touring edition they no longer make so what is a person to do about that?
Well that's easy just call the Chrysler engineers,they got your back.
Fucking insane ypu help me alot
Gracias amigo
Thank you so much!!
Thank you
😢 Need check fuses window
Smartass 😅
Man. I wish I would of done this before killing myself replacing the starter. Smh.
haha it's ok to have a new starter for the next 15 years
Bro I think the mechanic switch something from the fuse box after he said he replaced the starter and after that the key fob button wasn’t working
I'm at the beach and rt here by McDonald's.in long beach CA signal hill .CA cross st cherry st n willow in a gray one.o6 .
I tried doing this and almost blew up my car
I by passed the relay it cranks over but doesn’t start.
Hj