ULTIMATE 2JZ-GTE TRANSFORMATION! (Big turbo, intake manifold, paint etc.)
HTML-код
- Опубликовано: 23 авг 2024
- Doing the ultimate transformation on the 2JZ! Started with a small throttle body/intake manifold, small twins, now it has a big single and lots of room to breathe!
➥ INSTAGRAM / evanshanks
➥ TWITTER / evanshanks
SEND ME STUFF: 📪
P.O. Box #2311 609 S. Goliad St. Rockwall, TX 75087
MUSIC: Muse Maker / Jordyn Edmonds
OUTRO BY / daniilvataman
Bringin it back to the OG music intros just like the good old days nice!!
What’s the song to that music intro though?
1:30 when she says go lock the door 😂
3:01 directly after she says go lock the door.
Hey Evan , I’m not sure if you’re going to read this or not but here goes anyway. Up here in Canada we have a common issue with these Aristo engines . It seems we have to rewire the coil packs because the old wires/connectors get brittle and crack causing misfires . Since the engine is out I suggest doing this before it becomes a problem.
A simple google search will show you and anyone else what I’m referencing.
00 ok
Evan: "pretty excited about this thing"
Also Evan: slams his new item on the ground
Javier Alvarado you beat me to it
trist moren I knew I had to comment right away lmao
5:40 I cringed when he didn't cover the exhaust valves all that degreaser will be going inside
Same
He’s not smart
Jase Tyler why be rude it’s the exhaust port anyways he barley got any inside
Depending on where the cam is he might be lucky the valve is closed :D els its gonna be a rough first startup :P
Its the intake side btw
First start video: I HYDROLOCKED MY 2JZ-GTE
I love that I can peacefully eat and watch my favorite RUclipsr 🥺‼️
I remember when Evan did this to the 1j
I dunno why you didn’t think the internet is gonna say something about you not taping the inlets 🤷🏾♂️🤦🏾♂️
Evan: ima keep the nat 2jz for as long as i can Also evan: lets build a clean 2jz gte and torture myself
Ev, how you gonna spend all this time painting and cleaning this 2JZ.... and then put rusty-ass, old nuts on that PHR manifold ?! 😂
Farewell_ To_Normalcy I was JUST about to comment this lololol
Because once you’ve done this a few times and lived with the work, you realize how over-spec’d the stock hardware is. The shit will essentially perform flawlessly for many decades. The hardware on my 3S-GTE is turning 30yo this year.
I haven’t been hyped like this for a project since your SC! Keep paying attention to those details. You always build them well!
You do realise that intake manifold and that large of a throttle body is just going to kill torque and make you're engine considerably laggier? If you're not pushing over 1000hp the stock intake and TB is the smartest and most responsive option. Oh well
I have this same manifold, that port is for the idle air control valve. Take the oem idle air control valve from the oem manifold and put it on that one along with the check valve, block the 2 coolant ports on the iacv and run a 3/8” filter on the iac. Deleting the iacv will cause problems with stock ecu and will have rough start ups and cold idles even with a stand alone. Also you don’t need to replace the whole tensioner. Just the bearing in the pulley $8.50 on driftmotion.
Advice coming in clutch again man, always look forward to it 🤘🏻
Ok im obsessed with this supra building series... With all this hard work you are about to create a fucking 2jz beast!!
I always love the inspirational talk at the end of the video.. it motivates me to dream big and achieve my goals
That 2jz is looking noice 👍👍👍
13:20 2jzgte stock throttle body is 3 inches the aftermarket one you have is 3.85 inches
Lol I said the Same thing Constructive criticism
Thank you for the ending speech. Definitely needed that
The tune at the start is such a banger
Hitting that Jimmy Oakes wrinkle black
That GTE is looking unreal my guy, keep it up!
That laugh my dude gave when he took out the intake manifold 😂😂😂😂 i love it
Awesome video man and love the idea of the Daily Advice in your vid. Keep spreading that love and God bless!
Any one else cringe when Evan says “crinkle” when it’s Wrinkle black paint? Stahppppp
It did crinkle! 😂😂
Dat cwinkle plaint
MKBHD: matte black everything
Evan: crinkle black the world
Hahaha true that
Need more videos like this, love these timelasped build videos ❤️
Evan I got one thing to say to you and that is keep up the good work your vids are a very big light in my days every time I get home I am excited for a new video
Oh, definitely should look into getting titanium exhaust/intake manifold studs...money WELL spent with looks and taking them on/off and never having to worry about them.
More Honda videossss, respect though since your building up your dream car so lol just patiently waiting
The very beginning was like a fung-fu movie scene.
the 2JZ should be the 8th wonder of the world just behind the Pyramides and Stonehedge.
Paint it silver like that turbo, would really look good as black and silver/white combination..
1) The block off plate is for your idle air control valve. 2) JZs do have coolant going through everything on the intake side.. oil cooler, throttle body, idle air valve, etc. but you deleted that with your aftermarket intake. Nice setup!
I’m honestly 12 and have never driven a car but always watch car videos
One of my favorite youtuber of all time 💪🏼💪🏼❤️
all respect points go to Evan
Thanks for the thought! Just what I needed.
that 2 bolt flange on the intake is for the IACV and the stock IACV has 2 coolant ports which can be plugged.
Wrinkle black the turbo 🙋♂️🇦🇺
Probably you should’ve cover the ports, always cringing here lol also when you drilled the d16
Can't wait to see this engine in the car
Trans idea for the Supra do a TR6070 with the bell housing and adapter and the magnum f tail housing so you have a 7 speed manual 600 hp 2JZ Supra
pretty sure he’ll just do a cd009 its a tried and true and easy transmission
Devon Friedman I’m pretty sure he will too cd009 are cheap and reliable I just think it would be cool if I had the money I’d probably try it haha
You always work on your cars but never actually drive them 😭 we wanna see that r33 ripping !!
thx for the boost evan 14:49
I'm not to the degree you are bud, but I've had my downpipe sitting in my room for nearly a week. Had of today, took the time to install it, 2 hours later I finally broke the header bolts free. Fifteen minutes later, I find that my mid pipe bolts are rusted.... Seized...... And just straight toast! Talk about pissed. Now I'm just gonna order the mid pipe and essentially have a full exhaust dp back. Can't wait, but now my tires are on hold for another month. FML lol
bro i wished i had much money like to be able to make my honda a bit crazy
Evan your inspiring words at the end of the video is what I needed to hear today. Thank you 🙏
hey Evan I'm from the UK love your videos and you allways give good advice at the end keep up with the good work dude
Just a heads up that port on the intake manifold is for the IACV on the NON-VVTI which you WILL need since you got rid of the DBW throttle body. I am assuming you are also going full standalone.
YAAAAAAAASSSSSS, DO THE CARBON MIDNIGHT PURPLE. IT'LL LOOK SOOOO DOPE
That big hole on the new intake manifold is for you Idle Air Controller
im so happy evan finally got a mk4 & i can tell he is too
I love 2JZ-GTE and love your content work bro
The hole in the intake (At the bottom)could be for a blow-off valve. Just a thought.
Blow off valves would be on the other side of the throttle body. It's most likely for a MAP sensor.
@@grantbowers2319 could be but it's a easy way to install a blow off. There's no welding or pipe cutting to install one. Just fabricate a small bracket
@@Dtx-Composedmenace you can't put a blow off behind the throttle body. The purpose of a bov is to relieve pressure from the charge piping, not the intake manifold.
@@grantbowers2319 the air is leaving the piping isn't it ? Doesn't matter where the air is leaking from a tire. A hole in it or the stem its still leaking its air out of the tire.
@@Dtx-Composedmenace no because a bov works when the throttle is closed. When you shut the valve it seals the manifold off from the charge piping, thus making 2 separate Chambers. The boost leaves the charge piping and returns it to atmospheric pressure while the air in the manifold is used up by the engine. If you open a bov in the manifold under closed throttle it will creare a vacuum leak and cause the engine to free-rev uncontrollably. This does not work as you think it does. Do some research on the subject please.
Thanks for the daily advice
Got an sc300 2 weeks ago. Was gonna build a second GE motor but just ordered a GTE w/trans and ecu from jdm depot 👍🏽
Keep on the good work bro!!....keep moving foward🔥🔥
Makes sure that everything is painted and looking good but keeps the old rusty bolts?
do a carbon cover with purple exposed cam gears
Love your videos❤❤❤. You inspire me to be the best person I can be..🔥🌻
Carbon midpurple sounds amazing
Love the build quality, but please get new bolts for the exhaust manifold
1:30 THAT LITTLE LAUGH😂😂
Loving the videos Evan, Keep up the great work. #thegrinddontstop
Dude you fcking inspired me with thag little speech. Much love!
The Transformation is going to look sick bro
@11:30 its probably a MAF sensor... im a BMW guy so thats what we call it lol idk if it changes but, yeah
“Iss beig Issa big turbow” 🤣
We are all going to come back to this video and reminisce on the evolution of his Supra. 😢
i straight up took my break at work early to watch this video❤❤❤
Destination in Amsterdam is the song in the beginning intro. Thank you Shazam !!!
what if you take a euro car with a small engine and turbo that. Like a Golf/Rabbit mk5 1.4 (i just wanna know what i get myself into XD)
Gotta love the 2JZ series👌🏼
Do the coil cover in TRD orange like the brakes
Dude gets a GTR and then a Supra and then forgets all of his other cars 😂
I’d of been the same way 😎
Lmao he only has his r33, supra, and r35, and Tahoe. He gave away his Evo, and sold his Lexus to fund his r33.
R҉O҉S҉E҉ I was wondering when someone would reply to this comment lol
I always wondered what happened to the straight piped Porsche lol
That’s what got me watching in the first place and then I was like oh shit this dude has a whole fleet goin hahaha
The last tid bits of the video was inspiring and real. Watching more videos 🤪
Thanks evan your a real homie! Advice was on point, much love!
Should’ve put those exhaust manifold bolts in vinegar to clear up some rust
Love the fact your buildi g a 2jz and are rocking a nissan flag i the back lol
i think its a MAP sensor on the plenum (beside the vacuum lines)
Silver valve cover with purple writing 👌
Great engine and turbo choice for a good street build
Awesome. Can you post a video where you link all the items you’re using?
Shout out to you for the message at the end. Just bought a 1990 Supra w/ a 2Jz turbo conversion. Tranny went out 30 miles before I got home (driving from Georgia to Missouri) now I have a huge project and any advice on what automatic transmissions are most recommended for 2JZ 1990 swap and how to install (vague I know) and that I didn’t waste 15000 $
You should get into powder coating. Pretty easy with a stove and a powder coating gun
Match the coil cover to the silver on the wheels and wrinkle black the letters my dude!🙏👌🤙
3:03 You smell the Coronavirus
Keep up the good work, very inspiring
Go with the purple! Paint the housing a little n let a little of the center still silver. 🤷♂️ an idea. I think the purple u want would be sick.
Do midnight purple on the cover piece with a 2jz no shit sign on the top
I wonder if I missed it, but what trans are you going to run? Please don't tell me you are going to keep running that glass 5 speed behind that GTE!
Man I live your work so much congrats on how far you have come and on another note I feel like you should look into fords from Australia they have a straight six Barra motor if you haven’t heard lots of fun I think you would like to experience them ahaha 😃
When it says 1 min ago 🥰
For me 1 hour :D
21 hour
Yesss I’ve been waiting for this vid 🙏
Evan please tell me your going to be using new bolts and nuts for that turbo manifold!
The bottom port is for an idle air control valve
4:52 i dont need a ton saying while spraying a ton
Do a collab with kalvin for this build!!
yeah i would to see this, everyone seems to avoid Kalvin hes a nice dude and knows a bit
Leezy true...maybe evan could also build his jz something like kalvin’s