How to program and install Toyota and Lexus TPMS Sensors using our Lexus GS-F!!
HTML-код
- Опубликовано: 27 авг 2024
- We use our Xtool D8 to program the tire sensors for our 2016 Lexus GS-F!
Purchase your xtool D8 here!
Wired: amzn.to/3tsopD0
Wired promo code: XTOOLD8D8
Bluetooth: amzn.to/3QahmZf
Bluetooth promo code: CODED8BT
Check out our Amazon store!
www.amazon.com...
Hey Stefan. Great video and thanks for taking the time to make it. Just want to clarify... you did not "Program" the tire pressure monitor, AKA TPMS Sensor. You registered the unique Sensor codes in the ecu. Programming is an all together different process. As is relearning which with Toyota products is done by using the TPMS reset button or driving the car or both.
I programmed the vehicle’s computer to recognize the tpms sensors yes
I got 4 new tires on wife’s 2014 IS250 F, now the sensors don’t read & the TPMS warning on dash. Dealer acting like it was like that before.
Iv just changed speedometer and now have tpms light on.
Can you on lexus 2is have 2 sets of rings with their sensors configured?
Hey does it matter which sensor go to any tire, like driver side should be tire1 tire 2 should be passenger side? Or can put any where after registering them
It shouldn’t matter! They’ll automatically relearn their position
If one went wrong, can you just program 1? Or all 4
Did you turn the car off during the registration
is the xTool required for installing the new tpms sensors?
You don’t need an Xtool per se. You do need a bidirectional scan tool though