Ive alway be cautious about touching the magnetic ring on the hub with a metal object and use a McDonald's coffee stirrer to clean up the ring. So assume i am safe then Baz to use a screwdriver?
Hi, first of all, excellent video! I stumbled upon it since I got the same ABS U0001-82 High-Speed CAN Communication Bus error that you mentioned you are not worried about. Could you please give more insight into why it's not a cause for concern? Thanks a lot!
I hope you can read the comments but which exact leads are those that are connected to the ABS sensor to read the voltage? I’m having the same issue and I suspect it’s the harness I already replaced the sensor and clear any debri from the bearing ring. Thanks!!!
Hi Baz, Came across your Vid as my Right ABS Sensor has failed, O/C between the 2-Pins, I put my Reg in to Carparts4less An offshoot of Euro Car Parts & it gave me an Option to purchase a Compatible Pagid 35509, JLR Part Number LR024203, which I did, but when I fitted, it came back with a "Wrong Incorrect" Part fitted on my Diagnostics Tool? & the Errors wouldn't clear, I know that you can purchase ABS Sensors for Cars with or without Parking Assist, My Car is an MY2014 2.2 Diesel Pure, without Parking Assist, but has got a 9-Speed Auto Gearbox, A pointer as to what Make/Brand of ABS Sensor is required & where to purchase would be greatly appreciated....
Your GoPro is fine Baz, a bit of glare here and there just adds to the charm. It’s the content that makes the channel.
It’s this kind of detail that makes me enjoy your videos.
Really appreciate this 🤙
great vid baz and love your new word "EPIC" :) and the voice prompt is really good!!
Great diagnostic skills, very interesting to watch
Thank you
Nice one, amazing technology we have these days. 👍
Top notch as always Baz 👍🏼
I am with you on the hot weather, can't stand it working or not. Can't sit in the sun either as I burn to a crisp. 😁
I'm with you Baz...working in hot weather over an hot engine is pure torture 😢
I hate it I'd rather be cold than hot
Pocket 3 mate. I’ve just started using it on my main channel. It’s THE BEST. Nice work pal 💪🏽
Did one on my xfr. The series of warnings that followed were immense 😂
Great work mate 👌
Not sure what camera you have bud but see if you can get a CPL filter for it might help reduce the reflections
Who new mechanics can be so interesting😱well done SIR👍💪
Great to see my own vehicle get the Baz Meredith treatment.
Pleasure sorting it for you
Ive alway be cautious about touching the magnetic ring on the hub with a metal object and use a McDonald's coffee stirrer to clean up the ring. So assume i am safe then Baz to use a screwdriver?
I had a mercedes c class yesterday the rear left was doing 65598 kph it was a really fast wheel
Literally doing this on my Evoque tomorrow
Nice one 👍🏻
From experience the owners have more issues than the evoke……nightmares
Hi, first of all, excellent video! I stumbled upon it since I got the same ABS U0001-82 High-Speed CAN Communication Bus error that you mentioned you are not worried about.
Could you please give more insight into why it's not a cause for concern? Thanks a lot!
I hope you can read the comments but which exact leads are those that are connected to the ABS sensor to read the voltage? I’m having the same issue and I suspect it’s the harness I already replaced the sensor and clear any debri from the bearing ring. Thanks!!!
Cant wait for the warmth 🤣🤣. Get rid of the thermals 😀
Hi Baz, Came across your Vid as my Right ABS Sensor has failed, O/C between the 2-Pins, I put my Reg in to Carparts4less An offshoot of Euro Car Parts & it gave me an Option to purchase a Compatible Pagid 35509, JLR Part Number LR024203, which I did, but when I fitted, it came back with a "Wrong Incorrect" Part fitted on my Diagnostics Tool? & the Errors wouldn't clear, I know that you can purchase ABS Sensors for Cars with or without Parking Assist, My Car is an MY2014 2.2 Diesel Pure, without Parking Assist, but has got a 9-Speed Auto Gearbox, A pointer as to what Make/Brand of ABS Sensor is required & where to purchase would be greatly appreciated....
at 3:04 with the scanner showed 11.52v that threw up a red flag for me.
Ignition been on for a while and voltage dropped.... Hence why the customer wanted a battery checking and replacing
@@bazmeredith Ah, cheers.