Not the issue I have - but still a really clear and helpful video. Thank you! More people like you sharing these things hopefully means we can stop so much waste in the world. And tool libraries! 🙏 👍💪
I do not known the size of the fuse. Usually voltage and amps are very low with these. If you have fixed your short you can use a thin wire to replace the fuse.
I do not know. I have not opened a nunchuck before. Never had any issue with them. But you can try. If you have hotair station it does not hurt to try. Most likely there sensor on that also.
@@natanteam Well if you think about how these are used. Usually they are used pretty hard. thrown around the room when you lose. This will cause a crack solder joint.
I did not make any diagnostic on the chip since I took a lucky guess that it may have crack solder joint. Since these get very heavy use and get dropped a lot. This chip is the one that controls the motion. If you have another controller you swap that chip from a working one to make sure that the ship is the faulty one. Usually take a look at the markings on the chip and search from e.g. aliexpress or ebay. These are the places where I usually buy my spare parts.
Not the issue I have - but still a really clear and helpful video. Thank you! More people like you sharing these things hopefully means we can stop so much waste in the world. And tool libraries! 🙏 👍💪
thank you for your comment. Hopefully you are able get yours fixed. I agree with you 100% we need stop wasting things and start fixing them.
3:30 hi there. what is the value of that fuse (size volts amps etc)?
I do not known the size of the fuse. Usually voltage and amps are very low with these. If you have fixed your short you can use a thin wire to replace the fuse.
How can I make this with using soldering iron? I don't have hot air.
you will need hot air because under the ship is a grounding pad also that needs to be reflowed.
Thank you for response. I will borrow hot air and try to fix
I'm having motion control issues with my Yoshi Wiimote rn.💀😤😭 This might be the video I need to fix my wiimote.😊 Does this work on nunchucks too?🤔
I do not know. I have not opened a nunchuck before. Never had any issue with them. But you can try. If you have hotair station it does not hurt to try. Most likely there sensor on that also.
Okay. I don't have one at all. But I can get one as soon as possible. Thanks anyways😊😉👍🏿
Thanks for this!
nice to hear if you got your control to work.
@@modernfix1 Still haven't tried, but this was the only video I've found talking about possible solder cracks.
@@natanteam Well if you think about how these are used. Usually they are used pretty hard. thrown around the room when you lose. This will cause a crack solder joint.
How do i know if the chip is broken, or if i need to resolder the board? do you know if and where i can get a replacement chip?
I did not make any diagnostic on the chip since I took a lucky guess that it may have crack solder joint. Since these get very heavy use and get dropped a lot. This chip is the one that controls the motion. If you have another controller you swap that chip from a working one to make sure that the ship is the faulty one. Usually take a look at the markings on the chip and search from e.g. aliexpress or ebay. These are the places where I usually buy my spare parts.