Looking for a link to the Blackmagic Design ATEM Software? Head over to their support page, select the ATEM Production Switchers and you'll see it below: www.blackmagicdesign.com/support/
Thank you so much for the clear and detailed explanations on using Atem Software. I really appreciate it. I was wondering if you could also make a video about using Ultimatte Software Control. All the best!
Thankyou Zephan. On the PRO Camera 1 input is YUV.. Can you advise, when remapping the Camera inputs say in the reverse where 4 becomes 1, 3 becomes 2, 2 become 3, and 1 becomes 4. Does the "new Input 1" retain the YUV function?
Great video! I am really close to pulling the trigger on a ATEM Mini Extreme ISO, and seeing the example of SuperSource made me even closer to getting one. Do you know if it is possible to save presets for SS? Lets say I want one scene with a large camera input and a smaller computer input, and then a different one with a large computer input and smaller camera? (I have to admit that I just skimmed thru the video 😅). Or if it is possible to switch input sources while in SS?
@@TheElvisFan100 you could use macros to make the super source layouts in various shapes and sizes and then just make sure to save your startup state so the macros come back when you boot back up again. You can also export them as an XML file and load them in any time. While in supersource you can switch what input goes into each box from the atem software or using a macro.
I am trying to save the ATEM Mini Pro Feed to my Macbook Pro hardrive, but the "drive" dropdown in the output tab stays grayed out. I have tried Ethernet connection and USB-C, can you help?
@@JoshuaHayes-o7t you need to connect a solid state drive from the approved list on blackmagics website to see a drive in the menu. If you want to record from atem to Mac you’ll need to open up OBS, QuickTime or some other recording software.
Blackmagic offers the atem 4k8 and the atem constellation 4K series. I’m not as familiar with others but 4K will typically cost a premium as most people are not streaming or switching in 4K.
All the things I wanted to understand (like in the Upstream Key tab and some others) you said "this is for another video". Ok.. Fill source and Key source not explained. NOT a "Full Tutorial".
I have tons of other tutorials on my channel including this playlist of 33 trainings all based around the ATEM. If there's something in particular you're looking for training on, just let me know. Everyone uses the ATEM differently and your specific needs might be different than someone else. It's hard to show off using things in the specific way you need it. Let's open the dialogue, tell me what you're trying to do. Here's the playlist: ruclips.net/video/fHT2pqEMIBQ/видео.html I also provide a comprehensive training in the 6FL Course on my website which dives deep into keyers, chroma keying, etc. so it's important to note that this video was a tutorial on the software control, not necessarily using every little feature of the ATEM ESPECIALLY considering each atem is different in its capabilities, how many keyers it has, etc. so it would be impossible to show the variations for every model of ATEM.
Looking for a link to the Blackmagic Design ATEM Software? Head over to their support page, select the ATEM Production Switchers and you'll see it below: www.blackmagicdesign.com/support/
You are the absolute best at this and explaining it.. thank you so much.. I owe you...
@@FireCityChurch thanks for tuning in!
Thanks a lot bro for ur time making this video.
Thanks for watching
Thank you so much for the clear and detailed explanations on using Atem Software. I really appreciate it. I was wondering if you could also make a video about using Ultimatte Software Control. All the best!
@@kaizen11237 I could if I had the ultimatte 😂
Thanks Zephan, looking forward to the other videos.
Thanks for watching!
Thankyou Zephan. On the PRO Camera 1 input is YUV.. Can you advise, when remapping the Camera inputs say in the reverse where 4 becomes 1, 3 becomes 2, 2 become 3, and 1 becomes 4. Does the "new Input 1" retain the YUV function?
@@bne_trf6387 it will always be that first hdmi port no matter what number you map to it. It is a hardware limitation.
Great video! I am really close to pulling the trigger on a ATEM Mini Extreme ISO, and seeing the example of SuperSource made me even closer to getting one. Do you know if it is possible to save presets for SS? Lets say I want one scene with a large camera input and a smaller computer input, and then a different one with a large computer input and smaller camera? (I have to admit that I just skimmed thru the video 😅). Or if it is possible to switch input sources while in SS?
@@TheElvisFan100 you could use macros to make the super source layouts in various shapes and sizes and then just make sure to save your startup state so the macros come back when you boot back up again. You can also export them as an XML file and load them in any time.
While in supersource you can switch what input goes into each box from the atem software or using a macro.
Hi Zephan
Is there any solution for Auto gain in Atem. I always have to adjust audio when speaker sound goes lower while live streaming
@@JanoahGeorge not at this time. You can leverage a limiter and compressor in the EQ though to maintain a certain level.
I am trying to save the ATEM Mini Pro Feed to my Macbook Pro hardrive, but the "drive" dropdown in the output tab stays grayed out. I have tried Ethernet connection and USB-C, can you help?
@@JoshuaHayes-o7t you need to connect a solid state drive from the approved list on blackmagics website to see a drive in the menu. If you want to record from atem to Mac you’ll need to open up OBS, QuickTime or some other recording software.
how can i recod on 4k instead of full hd?
The atem is not a 4K switcher. You’d need to buy one of the 4K constellation switchers and record 4k in a hyperdeck.
@@zephanmoses thank you for your comment, do u have recommendations for 4k switcher for podcasting?
Blackmagic offers the atem 4k8 and the atem constellation 4K series. I’m not as familiar with others but 4K will typically cost a premium as most people are not streaming or switching in 4K.
how to import logo animation .mov movie in Atem live ?
You'd need a video playback machine such as a hyperdeck or software like Mitti (Mac) or ProPresenter (PC).
Thanks zephan
@@varlerian enjoy
All the things I wanted to understand (like in the Upstream Key tab and some others) you said "this is for another video". Ok.. Fill source and Key source not explained. NOT a "Full Tutorial".
I have tons of other tutorials on my channel including this playlist of 33 trainings all based around the ATEM. If there's something in particular you're looking for training on, just let me know. Everyone uses the ATEM differently and your specific needs might be different than someone else. It's hard to show off using things in the specific way you need it. Let's open the dialogue, tell me what you're trying to do.
Here's the playlist: ruclips.net/video/fHT2pqEMIBQ/видео.html
I also provide a comprehensive training in the 6FL Course on my website which dives deep into keyers, chroma keying, etc. so it's important to note that this video was a tutorial on the software control, not necessarily using every little feature of the ATEM ESPECIALLY considering each atem is different in its capabilities, how many keyers it has, etc. so it would be impossible to show the variations for every model of ATEM.