I Just Cut off Scrappy's Motor with a Sawzall 😳 | Scrappy #68
HTML-код
- Опубликовано: 27 авг 2024
- We are getting ready for twin turbos on Scrappy so we cut off the motor, extended the mount, reshaped the cowling, and added a whole bunch of things, check it out! Also...we are headed to Oshkosh! If you are going, stop by and shake my hand. I love meeting members of my aviation family. Check social media for appearance locations and times!
Official Mike Patey Gear:
mikepatey.com/...
Check out some of my Favorite Aviation Companies:
Best Tugs
www.besttugs.com/
Worlds Greatest Zip Tie!
www.griplockti...
Avionics Systems
www.avionikits.com
Pratt & Whitney
www.pwc.ca/en
Turbine Service
www.covingtonai...
BRS Parachute
brsaerospace.com/
Aircraft Engines
www.lycoming.com/
Carbon Cub Kits
cubcrafters.com/
Aircraft Lighting
aeroleds.com/
Garmin Aviation Products
garmin.com/Avia...
Aircraft Fabric
www.stewartsys...
Aircraft Lighting
flywat.com/
Alaska Bushwheels
www.airframesa...
EarthX Batteries
earthxbatterie...
King Shocks
www.kingshocks....
Hi all! As our channel grows so do the scammers. We will never reach out via telegram or messages via RUclips. Winners to any prizes or giveaways will always be contacted via phone or email. Please be vigilant and report any scammers! Thanks!
Thanks Mike.
LinusTechTips made a really good video about it and still constantly rants about how youtube seems to not fully care about it, he also has a really good video on how to fix it. its not a 100% solution but it is a temporary fix for the issue you have with bots, when you have the time I would highly recommend it
Thanks Mike. I recently got a Telegram “supposedly” by you, attached to that initial video about the Cessna’s engine inexplicably quitting. I made a legitimate comment.
It was the first time I’ve heard about telegram. I tried responding, and finally I figured out how to do it. He said I was lucky to be in the drawing. Now somehow the name “Andrew Simon” is linked to that telegram session. Hope this helps you some.
Thanks Mike for letting people be aware of these scammers. It comes through as you have won a prize text this number. I fell for it for a minute then figured it out.
Could done with this Monday. Figured out it was a Bot fairly fast. Put a warning out, and reported over 21 contacts by the same Bot.
My very first bot contact, I just tried my best. Though I had little idea.
This video could have been 2 hours and I would've watched every second. There was so much not shown but I imagine it was a ton of work. Great job ! 👊😎
I would agree, should do some more detail in these for us eng guys to drool more.
Agree 100%
100%!!!!
Yup 100%
💯
What features would you like on scrappy?
Mike: “yes, all of them”
I have honestly never seen or even met someone with so much talent, crazy what he is capable of
You’re our family, too, Mike. Love you!
Thanks, Mike. These videos for me through a big part of the depression of COVID. And your passion for SAR moved me to get involved with Civil Air Patrol. Since scrappy started I’ve joined and gotten 3 ratings, and it was these videos that pushed me to do it. Thank you
Watching you complete these builds is amazing.. But we would love to actually see you fly it, please share some flying videos. In cockpit, startup shutdown etc!!
Oh, MP never flies. He only builds ;->
@@rickkennerly2379 Sands. You mean sands. I swear he doesn't mold anything, he just sands the shapes into the materials
Loss of the NOS box truly sounds like divine intervention Mike. You don't loose anything!! Can't wait to see the turbos!!!
You were blessed with great tallent and what is wonderful is the way you use it. Thank you for sharing.
Mike! It looked so natural I didnt even notice the changes at Osh! Then I see this video later in August. Well done, Amigo!
Missed this video until now, noticed scrappy had a longer snout this year at Oshkosh vs last year, cool to see the changes in person as well as behind the scenes!
Mike, Good to see some content from You. We loved the Scrappy Build Series.
With all of Your business's running full tilt, I am surprised that You made the time
to give us an update. Happy that You did ! What ever You want to publish, I'll watch it.
I had a crazy dream that I was flying in Scrappy last night, and I get a video today 👍
Number 4 for the scamper treatment. Wtf is going on?
Not a pilot but this almost 75 year old enjoy every video you make. Missed a great opportunity when I was 16 in the Civil Air Patrol to go off for 4 weeks and get my solo license. Wanted to work and buy me a car that summer. Somebody kick my ass. Be safe and wishing you fair weather in your travels.
Mike, you're very important to even none aviation people. We need more content, please.
Well, my friend, not only are you getting better at building planes, but you're getting better as a husband too! Proud of you, Mike!
Blessings to you and your family!!!
family is important, glad you got to spend the road trip with them. we know you are so busy in life and love the short updates, but really do miss the more in depth build videos
Hanging around with Cleetus does give one a desire for twin turbos! The longer nose looks Awsome!
Mike, you are probably one of the few people in the world that could ‘improve on perfection,’ but you did it - again! I’m so glad you were able to resolve the weight and balance issues you mentioned and Scrappy looks awesome! By the way, your house and pool is looking pretty spectacular as well, WOW!
Mike Patey I know you’ve been tempted at times to install a turbo prop in Scrappy and I think it have been really exciting to see how Scrappy performed with a Turboprop. I believe you’ve made the right choice staying with a conventional engine, even though there isn’t really anything conventional about that 780 however a Turboprop isn’t within everyone’s budget and a bigger piston driven engine is. So many people have installed LS based engines into their airplanes
Thanks for the great content and I can’t wait for the next build. Draco X
Mike Patey. He stands on his work.
Great new look for Scrappy but most importantly savor and enjoy that sweet family time!!!!!!!
My favorite man on this earth. Mike party. The party brothers are awesome. The whole family is. Oshkosh is coming up boys
You just absolutely cannot leave well enough alone. And I freaking LOVE IT!!! I so cannot wait to see this when it’s done. Well , when it’s done again. LOL
Your every day is better then our vacations can’t imagine how cool your vacations must be.
I’m so excited to finally see this in person! I’ve watched the build from the beginning. My new job is taking me to Oshkosh and I couldn’t be more stoked!
As someone involved with operations and maintenance, super happy to see access panels to allow ease of maintenance! And I know I speak for others, too, just want to say what an inspiration you have been to me personally. I consider you one of our national treasures. Thank you for the videos and for allowing us to be a part of your inventive process.
NOW plenty of room for the PT-6
Next project: Let's get this channel to the million subscribers it deserves.
@9:20 “I've often gone to a Bed Bath and Beyond and found some plastic part to start a mold for something completely different”.
I though I was the only one who did stuff like that. 😁 Sometimes I'd even buy an item just because the plastic packaging was the right shape. I was wandering around a store searching for the exact right thing and an associate asked what I'm looking for. I replied, “inspiration”! 😎
Nice that you are getting the family time in!
The whole world should know about this guy. There ought to be a Nobel Prize or something for what Mike does.
Family is important ,I hope you guys have a wonderful time driving to Oshkosh.
Turbo Scrappy! Just when you thought Mike built the ultimate bush plane... he goes and makes it even better!
I'm thinking that the only reason that Mike didn't just go ahead and put a turbo-prop in Scrappy is that he wants to be able to offload fuel to his buddies planes.
When a man has a Sawzall and is cutting on a plane, you know he knows what he's doing and has some big big plans!
Usually a Sawzall is used when the airplane is going to be trucked somewhere for a static display. Kudo's to Mike Patey for getting right on the new engine mount moving the CG forward for a better loading envelope. 🤑🤠👍
I just found your channel. I have no idea what you are talking about but you talk about it so passionately I am almost compelled to watch. You may be the coolest nerd in the world. I love it.
Mike, perfect change @ 11:47 to decent music, those nasty guitar riffs early on reminded me of those car build shows where the project was being rushed because they do not teach anything it's all about the fake drama. Back to Coffee!
Mike, always fun to see your ideas materialize. Great work, Ron. Thanks, Mrs. Patey, for sharing Mike.
🙋♂️ "Back to work!"
Super as usual. Thank You for sharing !! H.
I wish you would explain to us a little or show us what Engine Mount did and how it was lengthened or changed after it was cut again. Thank you for all the episodes you provide, which contain a lot of challenges, fatigue, and science. I wish you and your family safety from overseas.
Tell CAD to add 10.000" here 👈
I thought he did a great job. He explained everything. As for the motor mount. He didn't actually modify it. He threw it out and made a new one. You don't get to randomly splice a motor mount.
@@tireballastserviceofflorid7771 For sure but it would have been great to have that in the video.
I'm sure he'll show all of that in the video where he adds the turbos.
Mike, you are a complete NUTCASE! I love your insane over speced engineering and builds... and all you do!
Keep it those SICK projects going!
Can’t wait for Oshkosh now! Visiting from Australia and Oshkosh itself is on the bucket list but now to see you and scrappy both! Dream come true
Wow. Great update and just love the videos. Have a great time at Oshkosh.
Supreme workmanship. What else can be said but wow.
One of the big issues we have in our area is”Northern California “ is the lack of DPE’s. And diverse availability on what they can check ride for. You guys would make excellent DPE’s. Build them all.
Bless ya brother, wife and family FIRST!
Now you have it right.
Grandpa Ted here!
Loving the new video style… it’s like all graduated from scrappy 101 and now we are all more advanced. 👍🏻
Gatorade should sponsor you and revamp their old campaign because "I wanna be like Mike!" You are so inspiring!
Great video, great project, great job.
You are a great lovely family working hard and sharing a lot. Thank you and congratulations!
Well Mike you must have got all your work done since Scrappy just showed up at Air Venture!!!!!!!!
He is back 🤗🤗🤗
Thank you, again, for all you and your family are doing for all of us 🌎
With love , 🇫🇷 😁🤗
I never get tired of you Mike. Keep my LAME passion alive. Thank you for being YOU!
I didn't get a chance to watch this until after I returned from OSH, where we finally met in person. I couldn't help referring to my own photos while watching this video. Such subtlety of design! So now we got something else in common (just barely): we both flew our recently completed (or modified) aircraft to OSH! So good to finally be a fully fledged member of the OSH aviation community! Thanks again for all the inspiration.
Need some nose art. I keep picturing a mongrel dog's head sticking its head out a car window so happy to have it's head in the wind.
Have a great time driving with your family. Hard work pays off!
A GREAT LOOKING AIRPLANE ! THANK YOU ! MIKE P. , YOU DO ALOT OF WORK , ! !
You are an aviators aviator. Good to the plane and good to the family. A model to us all.🙂
Mike, I always amazed by your enthusiasm and ingenuity can not wait for your future videos. Enjoy Oshkosh together with your great family.
Safe travels.
Oh man, so much going on in this video for it only to be one video! I / we love coming along for the process 😍
Mike it was great seeing Scrappy at Oshkosh, I took lots of photos, I just missed meeting you! maybe next year.
That plane gets sexier every time I see it!! Love it!
Waow what a machine the DRACO was.... Incredible landings and take off 👍👍👍🏵️🌺💐💝🙏
Would love to see a cross country flight video😉
You are really a master in blending and forming.
You just cut up the cowling and put an extension in between without it being obvious in the end result is mind blowing.
You would be a fun guy to know and have as a friend. It's your energy. It's creative and radiant. Keep your videos coming! They're wonderful and very educational.
Love it!!! Almost looks like a Carbon Cub and a Pilatus PC-6 had a child!! Keep up the great work!!!!!
Ill see you at Oshkosh cant wait to see you and scrappy there! You are a legend and inspiration in the aviation world!
Mike, there is no telling how many people you are influencing to do things right and even better. God bless you, my friend.
Love the way the front looks. It’s beefy.
Can’t wait to the next build love your videos glad you were able to make this one, I wish that I still flew but after the brain surgery I don’t fly anymore but I sure do miss watching your videos at length I hope that you’re able to reengage with your busy schedule and get us some lengthy professorial and comical videos for the future… You’re always fun to watch and I love it..❤️❤️🙏🏻
❤️ Aviation
Looks great. Watching all your videos has inspired me to finish my Private Pilots License and I am 67.
twins basel!!! TWINS! mike, you are the man!!!!!!! i like the way you think!
You gotta love that he uses particle board for mold making lol. True DIYer
it's good to see you again Mike.
Good wishes from İzmir/ Türkiye 🇹🇷
I went from horror to awesome watching the presentation. The standard of finishing is 2nd to none. Unbelievable.
I love how the nose looks now… I think it’s much sexier with a long cowling!!! Great job Mike!!!
It takes true confidence in your abilities to just saw off the motor mounts. Again, thanks for the inspiration!
I am sure more than a few of us were cringing at that! But, having said that, it is Mike and total confidence it will be better then before.
Glad you're back, Hope to see you again sooner.
Cant wait for the snails to show up and wreak havoc at the fields. Draco would be proud, Mike.
I'm really glad Scrappy is growing up and won't be a bottle baby anymore.
"Were you calling me 'fat'?" - Pfffffffffhahahaha, these meme snippets are killing me... 😂😂😂
Can’t wait to see Scrappy at Osh !!!
Use a scoop from a Subaru WRX/STI for the top mount intercooler! I think Subaru works with SAR from time to time too.
It is perfect now, but you know what you doing Mike, love it
Its just Awesome. I'm sure I must be watching this channel most of the time with my mouth open! What Mike and his "family" achieve is just unbelievable. What they achieve in a year, is more than most of us achieve in a lifetime. Thank you guys for entertaining us, really appreciated.
You are the third who got this. It seems like a bot and a scam. I tried to warn people here, but they seem to have deleted my warning
Awesome NEW LOOK! and C-G Thanks for sharing.
While I love the technical and scientific side of your videos, it is awesome to see your family priorities are just as important. It is so easy to get lost in work, projects and important things in our lives. It's great to see a hard working American and family man working at both! God bless!
Right on Mike. Great to see progress on the twin turbos. Scrappy looks great. Can't wait to see the turbo instal. Hope you all have a great time at Osh. Keep up the excellent work as always. Fly safe my friend. 🤘🇺🇸🛩️
Wow, enjoy your time with the family...
I’m so excited for you to “Get back to work Mike “
😂😂👍🏻😎
Longer nose gives Scrappy a balanced look, Looks GREAT!
I think the nose of Scrappy, now somewhat resembles the nose of a P-51 Mustang. Very cool!
I cried when u cut the engine strut brace!
Thank you Mike I really appreciate what you did take the time to to help us build our airplanes and show us the right way to do thanks you a heck of a guy and I really appreciate what you do love you videos thank you for everything you do take care my friend always fly safe your friend Bruce
Love it Mike. Keep up the great work!!
Hmm, so an ironic idea. Build / get a trailer to tow Scrappy to events with your family.
Then you can build an assembly rig.
Have a great time at Oshkosh.
I'm glad you didn't change the whole cowling design🙃... Just working on the carbon cowling of my RC Scrappy😅 Hope to get this tricky part done soon😊
That wing mechanism for the slats is so elegant.
Amazing plane.
I suggested a Plastic version sold by Horizon Hobby as a Coffee table version... or on his web site like the Spar parts.
So - radio silence for like 6 months - then all the sudden - THIS.
Yer killin' us, Mike! lol
Back to work, with more (frequent) videos! ;)
Have fun at Osh!
He just cut off the engine mount! So much quicker than unbolting the mounts! So cool 😀! Am I the only one who wishes for a constant speed prop? Just imagine what a rocket Scrappy must be at altitude!! A STOL-Rocket ;-)
06:00 when Mike says he's gonna push really hard! OMG
Awesome content as always
Maybe you can add some sliding barbell weights somewhere in the fuselage for quick CG adjustments, in case you have some unexpected CG issues.