Testing new GoPro Hero 10 and Mercedes W124 300E update

It's a cool little camera and fun to use, you can get some great shots with it, but after filming for 20 minutes it shut off and the screen said camera to hot, so I think shooting at 4K 60fps and superview on , it has to do lots of processing and the main chip and SD card get really hot, I measured about 128F, outside temps were about 85F.
I may return it and get a 11 or 12 model, have to do some research.
Meanwhile the W124 is doing fine and this summer going to spruce up the interior.

[@danricci6996]

Another great video !. GoPro looks good , sound too. I know what your next video will be about: Headliner 😁😁..Quick question: Is the cover on the 300E shiny, like "sun repellent" ? And if it is do you happen to remember where did you get it? Thank you.

[@mygermancars7264]

Got it for free from Amazon, I review items for Amazon they send stuff to me, review and keep the product, it's a cheaply made cover, you can see my review.
www.amazon.com/dp/B0D1R721DN?th=1

[@AlonSOAMAZING]

I have a 89 mercedes 190e I am also in socal . Have you ever had a check engine light go on ? Do you know the common issues . I see the difference in codes from 85 to 89 to 90 and above

[@mygermancars7264]

Usually it’s the 02 sensor, that was on my 90 300SE and the 92 300E, if you search the net you can replace it with a early Mustang one, cheap about $30 instead of $90 for OEM
In my experience with these cars it’s always emission related.

[@infiniteblessings6793]

I got an 88’ 300E about a year ago, will be doing a whole tune up and vibrating dampener replacement which I hope isn’t too hard for me to do😅 but they do seem like smooth rides 😎

[@danricci6996]

@@infiniteblessings6793 About the vibration dampener (aka harmonic balancer) . Despite what the MB manual says you do not need to remove the center bolt, actually you don't want to because that thing will require a 200 ft lbs of torque and locked transmission.

[@AlonSOAMAZING]

@@mygermancars7264 thank you so much for getting back . Would you say a 1990 mustang would fit ? Are you talking about splicing it ? Or do you have a specific year of the mustang

[@mygermancars7264]

@@AlonSOAMAZING This www.amazon.com/dp/B000BZEJCY?psc=1&linkCode=sl1&tag=mycars0c-20&linkId=360c7d0d3cca067fdfd1f5afa9759665&language=en_US&ref_=as_li_ss_tl