Enhance Your Hydrographics: Complete Fogger Kit Installation Guide
HTML-код
- Опубликовано: 12 сен 2024
- In this guide, we will lead you step by step through the complete installation procedure for Hydro Dipping. Whether you refer to it as immersion printing, water transfer printing, or hydro dipping, this film can be effortlessly applied to a wide range of surfaces including plastic, metal, chrome, fiberglass, wood, glass, and more!
Additionally, our skilled technicians will provide expert guidance for installing our Cold Fusion Nitrous Fogger Kit. Don't forget to visit our website for additional installation tips and advice on maximizing the potential of your Fogger Kit!
If you find yourself in Houston, Texas, be sure to drop by our shop!
Cold Fusion Nitrous Systems LP
Address: 16411 Dundee Rd Suite 101,
Cypress, TX 77429
Phone: (281) 304-1515
www.coldfusion...
Email: sales@coldfusionnitrous.com
Give us a thumbs 👍 and smash that like button!
The bosses are drilled and tapped wrong for a 90 degree nozzle. the flat they drilled them for would be for a straight nozzle, the other flat on the boss is the correct one for a 90.
see that..how many times do I tell people primer , then base before hydro dipping. YOU CANT GO WRONG!!! awesome vid guys...go get the boss a drink lol!
There should be a fogger fit made to take seafoam spray directly into the combustion chambers. That would be so useful.
Can’t blame the Post Office for that packing job! That was the real problem.
Probably be a good idea to blow out the lines you ream with nitrogen or brakeclean to get the chips left in there out --- a little tap on the bench ain't gonna cut it for those solenoids when they open the first time and ingest those shaved particles of metal left in the line---Just a suggestion from an old school mechanic---- Good video otherwise
Hey bro they make sharpies for marking tubing it stands out great and won't rub off .. just sayin
I bought your 625.00 direct port kit and can’t seem to figure out what tap or drill bit I need
I thought the tubes from the solonoid should all be the same length for a uniform feed to the inlets?
What size jets are ya using
Price for this job
Where do you find little pipe benders like that?
In your performance parts catalogue.
How much would that cost to be done
ummm...bout tree fiddy
I want to put a 2 stage no's kit on my car but it has a 2 4 barrel carb setup is that possible ?
i would never hydro-dip my intake or anything for that matter just not into the fake carbon look
ruclips.net/video/XNEghE3neBg/видео.html
Front right intake fitting is leaking
Leak @13:09 mofukas
Lmao
fist off you had a boxer dog. I left the video then.