Timing Belt and Water Pump Replacement on my 2004 Mitsubishi Montero.
HTML-код
- Опубликовано: 25 авг 2024
- In this video I go over the entire process of removing and replacing the timing belt and water pump. I do have multiple videos on my channel where I show you this process but, in this video I consolidated all the footage into one main video. Gen3, Mitsubishi, Montero, shogun, pajero, 3,8L engine,
Excellent video. Montero's have many annoying "tricks" when working on them. Simple things like changing RHS plugs LOL. Anyway, some tricks I found were the crank angle sensor has a U shaped groove that sits either side of the crank angle timing plate (behind the crank pulley). At TDC the sensor is front and rear of the plate and cant be removed unless plate is rotated to clear it and likewise to reinstall the plate as I think you saw. Ok if neither is removed. Second trick is the accessory plate can't be removed due to 1 AC bolt. It is the one between C and the lower B bolts you show at the 35 minute mark. If you use a thin blade on a angle grinder and cut the AC mount ear off you will save 4 hours of work as no need to remove PS pump or aircon pump as you can now simply pull out accessory plate. Keep the little ear and use like a washer to put bolt back in. It does bugger all anyway. Goodluck to all who work on these demons 😂
Thanks! that is a really good tip. I'll keep that in mind for next time.
Great Job, very helpful Jim. I really appreciate your work and you sharing the installation. I REQUIRE my 2 young adult sons to watch your channel. One has a 2002 Montero Sport 4x4 V6 that we do ALL the work on together. We just completed the timing belt and water pump after watching your great informative video. He only uses the Montero to pull his boat to Lake Mead 5 or 6 times a year from Las Vegas and with189,000 still runs and drives GREAT. You help so many.......Thanks again. "HP"
Just for info, I lived in Manhattan Beach just down the road from you prior to retiring and moving to Las Vegas.
That's awesome! thank you so much for your nice comment.
Hola Jaime vivo en LA, CA excelente video con mucha técnica, tengo un Montero 2004 Limited y un problema con el carro, cuando está frío lo enciendo y conduzco y a los 2 o 5 minutos se apaga, pero vuelve a encender. Me votó el codigo P0300 sé lo que significa, se le han cambiado muchos repuestos y sigue el problema, alguna solución gracias, soy Javier
thank you very much for share this process, it is clear. :) your tecnic. common sense.. I could tell you that sometimes is the less used!.. saludos desde CDMX.
Saludos, Gracias!
Thanks for sharing this video. Keep posting Montero content!!! I need to work on mine🤐🤐🤐.😭
sure, will do. What kind of topics would you like to see?
Saludos desde Argentina. Muy interesante tu canal,justamente estoy reparando una MItsubishi Montero XLS 2001, V6 3500. Me ayudan muchos los videos. Gracias.
Gracias y felicidades por su nuevo liderasgo. Arriba la libertad carajo!
@@jime.angulo4151 Hola Jaime. Gracias por todo. ¿Hay manera de contactarme contigo?. Estoy necesitando el manual de taller de la XLS 3500 y solo consigo el de la Full. Por ejemplo no encuentro la central de la alarma de la camioneta.
Saludos desde Puerto Rico, tienes algún vídeo que hable del Booster de frenos, sistema ABS de Montero 2003 3.8 V6 que es la que tengo. Gracias .
no todavia no.
@@jime.angulo4151 Ok lo esperamos.
Здравствуйте а какой номер инструмента для фиксации натяжного ролика ГРМ
ARES 70213-1/4-inch Drive Beam Torque Wrench - 0-80 Inch/Pounds and 0-9 Newton/Meter Torque Wrench
Thanks for putting all videos in one. It helps a lot. Do you mind sharing what you ended up using for insulation of timing cover ? A link will help.
I used window screen spline you can easily find it on Amazon or the Home depot.
Thanks for sharing. I ended up using the valve cover gasket cut in half.@@jime.angulo4151
@@dapolimagic Nice! that's a good idea!
Good evening. I'm from Jamaica. My 2001 Montero sport is over heating and the water leaving the radiator as well and the over flow bottle bubbles up. Can someone assist me plz
Head gaskets, my brother.