Introducing the Operator Series Billet Shifter By Motion Raceworks
HTML-код
- Опубликовано: 21 июл 2024
- Motion Raceworks Operator Series shifter incorporates all of the driver needs and add-ons into one simple-to-use platform. This one size fits all shifter adapts to your needs and can be upgraded and built on as they change! From weekend warrior to Promod, this shifter is the perfect solution for your automatic transmission.
Shop Operator Series shifters and accessories at
www.motionraceworks.com/colle...
FOLLOW US:
Website: www.motionraceworks.com/
Facebook: / motionraceworks
Instagram: / motionraceworks
TikTok: vm.tiktok.com/JjuVejc/ 
Авто/Мото
can't wait for the 4L80E version!
@Johnny TheTrailerSlayer like they should. 80e are electric. Leave it in drive and let it do it’s thing.
@@Vaca1950 if you’re the guy that just puts it in drive and lets it do it’s thing. Then you don’t need a shifter like this anyway.
You guys come up with the best stuff, and it's MADE IN AMERICA.
🤯🤯🤯🤯🤯
Motion Race Works takin over!!!!!💰💰💰💰💰
Love the thought out cup holders eh. That trick lever is pretty sweet too. Great job!
Just wow I’m in for the parachute attachment and cup holders
Just received mine and I must say the design and quality is above and beyond
Never get sick of Motion Race Works improvements on any racing ideas. 👍🆒 Aussie Fan 🤘🇦🇺💪
Yet another belting product guys absolutely brilliant and well done 👏. ✌️🇬🇧✌️🇺🇸
These guys are killing it!
Totally bad ass. Well thought out!
You sold me with the dual action lever, but blew my mind with the cupholders!
Need one for a 4L80e! With that over drive!
Literally just messages the guys at KSR about it to insure this gets put on my camaro!!!
The quality looks instant . Wish you guys would make shift handles with buttons for the stick shift guys , something similar to the hurst handle.
This is perfect timing!!
Was trying to decide what shifter I was going to put in my car…. I guess I have my answer now
I wanna see a TF 727 versions!
Just curious, why wouldn't this work for the tf 727? Is the pattern way different? Love you channel by the way👍
Look!!!!! Cup holders!!!! And Doug breaks the internet again!!!!!!
Game Changer!! Looks good too
i really like these shifters. one day i hope to afford one for my TH400 and C10
Looks great
Wow you guys put a lot of time into this and it shows. The cub holders are neat.
Now i just need a powerglide for my civic? 🤣
Definitely getting one!!!
Elite work 👍
Looks really nice
Gamechanger!
Come to think of it, you should have named it that! 🤔😋😂
Looking good boys! Take my money!
👍🏽🇺🇸👍🏽 this is awesome.. we’ll thought out
I can’t wait to try one in person, it’s amazing how bad most aftermarket shifters are.
How long till you have one for the 4L80e?
The cup holders are a game changer!!!!!!!!!!!! dang!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Smooth operator!
Awesome item
This is huge
Exciting, dudes!
Awesome. I'm glad to be a small part of this!
Well looks like my dragster will be gettin a new shifter! Bracket cars matter too!
They sure do
Nice !!!!
Dang, I guessed it was ball valves. OK, a shifter is cool, too!
Are there any plans to have an electric solenoid incase our cars are already set up with those? I am liking this shifter with the one handed operation! Great job!
Can't wait to see the 4 speed auto shifter
Can’t wait for the c4 pattern
Might sound weird but I would like to see the frame handle mimic the handle of the iconic 1911 pistol. There are many companies that make custom grips for 1911's so the custom options would be through the roof.
How about putting making the cup holders for various other shifters? I'd love to have them on my PPP setup.
Love it
Electric solenoid option would be great!
I have to get th3 shifter to go with the cup holder
We need a 4l80 version!!!
Oh very nice ...
fresh!
Need this for a c6.
Will this work on my fully stock Honda Pilot?
Is there any updates for the th400 reverse manual vb? I bought mine when they first came out and have trouble with the 1-2 shift. If I pull the small handle the pin drops before it clears the first gear notch and causes it to not shift.
Do yall have one for a th400 with a P-R-N-321
Do you make this with a clean neutral
Cup holders to suit right hand drive?
I want just the cup holders
Can we get one for the Alison 1000???!!!!!
Sweet
need a 4 speed version!
Did you make the shifter fir the ford C4 transmission?
When are we getting the shifter for 4l80es?
Do you have one for the AOD?
Bet Cleetus puts one in Mullet(or Ruby) on tomorrow's video 😅... classy well designed parts as always 👌🏻
CLEETUS has been running one if you watch the videos of mullet
@@MrTrevorjoseph92 ohh really, sneaky. I'll pay closer attention
Can I get it in polish or raw?
I wish it would work with a c6 ford transmission
Great piece its too bad it takes so long to receive the part once paid for it, not sure why they don't mention that they don't have them readily available.
"I'd rather eat worms than drive an automatic" but this is pretty cool. Hope you sell a pile of them.
TF 727 please!
What about a throttle cable bracket for the Holley side mount Hi-Ram for foxbodys using an Icon TB. Noone on the market makes one an everyone ive seen has to make their own.
I bet our universal bracket will work fine
4speed?
Bring on the 4Lxx gates.
Make one for my Diesel!
Would love to see how they stack up with the m&m shifters.
Both are great options!
@@MotionRaceworksOfficial I figured! I know you both are top quality. And I’ve been in the market for a shifter. Have you guys thought of doing any other anodizing color options?
@@abarry48 we will be releasing some really cool grip inserts of all diff colors for the shifter in the very near future. They’ll be adaptable to new and old shifters
@@MotionRaceworksOfficial that sounds awesome! I’d like to put one through its paces. I’ll probably be grabbing one in the next couple days! Thank you guys for always innovating and bringing new and improved ideas to the community
great stuff there but gonna ask. why many drag racer have them shifter loosely mounted?
Its not the mount thats loose its the wiggle in the shaft itself all my b&m and hurst shifters have had it
@@MrRandy3504
Take a look at Bailey's "Sick Seconds" cars, you'll see what he's talking about the whole shifter body moves like it's mounted on a pivot..
FWIW, I've had the same Hurst Quarter Stick in five different cars since 1988..ain't no "wiggle" in it, amigo. Also didn't cost the better part of a grand..
😮
damn wish the initial release was a shifter cup holder bundle for 700$ :(
😎
HOLY SHITTTTTT
What about three speed 400 with clean neutral.
Coming soon
@@MotionRaceworksOfficial ok i will wait then.
700 R-4?
Kinda like giraffe tails….. way up there.
Support
💯💯💯💯💯💯💯💯
I think the music detracts from the video.
Bummer. Head to MotionRaceworks.com and you can read about it.
any 4l60e shifter trans lol
$700.00 ?
Firstttttttt
lol 700$ no thanks
Nice copy cat shifter
an eitght minute video to say "its well built and works just like every other "racing" shifter on the market"... cool
Thanks Matt, have a good day, sorry we stole 8 minutes from it.
@@MotionRaceworksOfficial I happily watched the video, just sayin, it works just like every similar design shifter on the market. I have one, so I can't say much.