Wow, five years later and you just saved my life. Had to adjust for the new version at a few points, but this got me there. As opposed to Toon Boom's learn portal where they try and teach you everything else other than what you need to get a basic character walking. Thanks!
I woke up this morning pretty convinced I was too dumb to work out toon boom, not for lack of trying. I did your tutorial, and it all fell apart and went south. I deleted everything, started over again, and low and behold, it's working and it's almost time for dinner. But I am animating with toon boom now officially. Very easy to follow too, which is absurdly rare in the realm of toon boom tutorials. Very good video, thank you thank you.
For those who have this problem in the Premium version: "when moving the 2 arms up 1 bone, both arms disappear." Right-click the deformation folder and then click Ungroup, you should now be able to do exactly like in the video
This is the most motivating comment ever. It's been a long time since this one so I'll have to see it again but I do prefer to get to the point when possible. Thanks!
Agree, brilliantly made a tutorial. Straight to the point no fluff and most importantly easy to understand for a noob like me. Turning something complicated and boring as rigging into a short and fun video, definitely deserve a sub and thumbs up. Kisses :)
Just met your channel, I was terrified by a cutscene I had to make in my Animation classes in University. The teacher just showed us that bones existed, but didn't teach us how to use them, you literally saved me, man. thank you so much, an greetings from a new follower from Brazil!
bro I am in the same situation (also in brazil) we have to make a 30 second short using cutout with either toon boom or animate but its like I dont know shit. I deeply regret choosing toon boom for this...
I've been considering using rig-based animation (or a mix of rig-based and frame-by frame) for my current project, and now I'm starting to feel grateful for the fact that I like putting characters in longcoats and frilly dresses and suchlike, rather than dreading having to animate complicated designs frame-by-frame.
Holy smokes this was so much easier to follow along with and makes a lot of sense!! Thanks for the straightforward tutorial! This is going to save me a lot of headache now 😂
Thank you for this tutorial. Most toon boom videos I find, are not beginner friendly and assume we understand the node view. I was only taught Flash in school, so opening up program is overwhelming.
Love how fast this was! Took me roughly two hours to follow along (because I had to redo some steps + my design was a little more complex) Now I have some basic knowledge and I'll be able to make some cool animations soon ~
Rigging is not the hard part with toon boon, it's animating the rig. A walk cycle in full deformers is a nightmare, i will be glad if you know a technique to animate a walk cycle with deformer.
I am curious to see a good walk cycle with deformer, without feet hovering the floor, or hips doing wierd thing, i almost became bald scratching my head trying to find a good workflow for deformers walk cycles
Ive watched this video countless times. Tried building a rig today. Gave up n reverted back to this video. I forgot kinematic outputs T.T thanks for the node free tutorial
How good is this? Do you save alot of time by animating with bones? I animate the traditional way, also when I watch animations I can always tell if it has bones because of how everything moves, it looks separated, can you animate as clean as traditional animation with this?
Check Teddy McPipy's explanation above! "For those who have this problem in the Premium version: "when moving the 2 arms up 1 bone, both arms disappear." Right-click the deformation folder and then click Ungroup, you should now be able to do exactly like in the video"
I have followed this tutorial a few times and keep getting stuck at the 10:45 mark when you move the 2 arms up 1 bone. When I do it (Premium Edition) both arms disappear. I have tried multiple different files with different character drawn from scratch. I simply am baffled. Also, when I create the bones for my character's body, I get 3 bones, not 4. I click exactly 5 times on my torso and still only get 3 bone layers in the timeline. Ugh.
Layer order tends to freak out a bit in the premium version because of nodes, open up the node view and tidy things up and see how things are connected together. Remember things plugged into the composite more to the left will appear higher in the layer order
having the same issue here. node view was a complete mess originally but i have cleaned it up, played around and still no fix. The nodes for both the arms completely disappear aswell.
i...i understand even less! WTF is that ramble of a Concept map? i understand every square is a layer, and things like bones or pegs are interconected... but still: what i'm supposed to do with that thing? how can i make my arms to not dissappear when i move them behind the body bone? what i need to modify in order to do the same as you here: ( 10:38 - 10:50) . do you have a tutorial iun how to understand this pukey mess of a layer, Onion skin? because OOOOF! i'm dumbfounded by whatever that is
I thought you might want to know I am citing this video in the bibliography of my thesis (part of it was teaching myself how to animate). Currently, you being cited as Skin, Onion.
this was a huge help, thank you! There is only one thing that I couldn't keep up with: at 11:27 you move the hand inside the arm layer. When I am doing this, the hand disappears. Can you help me? Btw. I'm also using Essentials
maybe this helps someone in the future, i got the same problem and solve it going to the node view and right clicking on the torso, group, ungroup then i conected the arm to the second bone node as the tutorial does.
i cannot believe just how many times i have asked toonboom staff about how to "layer color" just to find out theres literally a button for it thats called "draw behind" LMAO
This is great turtorial, but i am having an issue - right when, after you are done rigging, you hit transform button, and then circles and bones are green, enabling you to animate .Mine turn dark red, and i am really following stef after step, and it happened as well, after i decided to do everything from the beginning. Is that some other feature? do I need to unclick something?
This character design though, you're 6 days late for halloween XD. The bone system kind of reminds me of anime studio's bones, but more appealing with the circles to show the joints. I'm happy to see that you're making tutorials again. Please continue, I enjoy watching these videos and will eventually master these features.
Great video! I'm having a problem with the deformation process; every time I make bones it creates a "deformation" folder above them. If I put the images (the drawing that I'm deforming) in this folder my drawing disappears. What am I doing wrong? Thank you!
what you can do is create a new bone layer from your drawing layer, it will place a first bone you can move later. Then if you click with the hammer it will create other bones in other bone layers
It's fine. You can click the "+" button in the deformation folder. And, if you don't want Toon Boom to automatically create a deformation folder, click the Rigging Tool, the one with the Hammer and Wrench, then at the Tool Properties tab, under Rigging Tool Options, uncheck the third icon which says "Automatically create a group when creating a deformation rig." I know, I'm late but if you haven't solved the problem yet, I'm glad I could help :)
when I upload a picture of the top half of a body, if I put bones through an (outstretched) arm and move the arm/bones it drags the edge of the torso with. It, how do I make it move seperate to the body , it is a one layer pencil drawing that has been scanned and uploaded. I Would be massively grateful for a reply. What seems like such an easy fix I cannot work it out, thanks
When I'm placing L or R_arm kinematic Output under the Torso bone, the kinematic output just disappearing and It's not working along with the torso. Please help me...
this was great help except I got kinda loss when you got to kinematic output. I mean it's a super easy way (thank you) to rig it adding pegs etc from the timeline lol but I learned do add the KO and peg thru the node view, seeing the entire hierarchy branching off and seeing the parent child relationship between each layers and bones etc and placing them to their respective location in all this opened a new light makes it MUCH SIMPLE! I don't have to stress myself anymore with the node view ;-; good video
Ok so this has bee really helpful so far but now when I only want to move the face the eyes, mouth etc dont go with it and just stay in place. What can I do about this?? (im on harmony premium 17)
i'm new toon boom. i'm trying to use the rigging tool. i set up my deformation chain, i go to deform it but by second or third frame m drawing goes back to where it was before i just moved it and the only thing i can move is the chain. what's the problem?
Hey thank you for such an informative tutorial. Ive never done this before so im struggling a bit. After i color in each layer, when i turn the light table off, i cant get all the layers to show as one so i can begin rigging. When i select the "main drawing" it just shows the uncolored layer before i began adding color. What did i do wrong?
10:55 Master ! Could you please Explain this Part (how to move the head without moving shoulders )🙏🏼🥺 Please, a Humble request from your Fan/Subscriber
Hi! Thank you for the tutorial, I’m having an issue with rigging my own character in which it doesn’t recognise the different layers and only animates the one parent layer after adding bones . If I group them together, it will animate the whole thing and won’t recognise different layers for different objects. I exported this cutout as vectors from Illustrator if it helps, Any help I can get will be really appreciated, thank you!
@@OnionSkin I've also ended up getting a pdf about rigging cause I knew less about pegs than I thought, I'm finally starting to understand Toonboom now, between that and your tutorials, thank you! 😅
Great video! Can you answer a question please? I have created a character, added a pivot to each limb, I can only rotate the limbs with animation mode (the little man) turned off? Why is that? Also if I copied the character and put him on a different frame, (hit alt Shift 5 so I am not exactly copying) and adjust him, the my original frame is also adjusted! What am I doing wrong?
Question, you put a peg on the Head group before adding it to the Kinematic Output, but not for the right arm or left arm... if you want to animate the arms don't they need a peg too? I was under the impression that all the assets or bones needed a peg... idk!!
In my setup, I can´t fix de feet on the ground, like the After effects does with the puppet tool. When i mov the pelvis, and he is the main in the entire chain, everything moves. Looking for answers, i discover that the premium version has a mechanism to do that. Then, the question is: Can i solve this with the advanced version?
Click the Paint tool, then click again, a small window beside it will appear with the additional tools, click Stroke. The strokes will be invisible by default, so press "K" and it will appear. Then you can draw the stroke now.
hi, im trying your method but my hand deforms with the bones... is there a way to have the hand being parented to the bone but not being deformed by it? thanks!
Only thing I can't seem to understand is how when you finish coloring and turn the lightbulb off you can see the whole drawing with all the colors. I can't see that, it only shows whats on that layer instead of the whole picture. Don't know what I personally did wrong there.
The problem I always come across when I use bone puppets like this is I cant edit the drawing after its boned if I want to make changes. It like alters the drawing and pushes it off. If you press k you can find it and kinda edit it but its a pain and doesnt really work. I find it easier to just use ctrl alt shift d and make multple body parts
This is what the drawing view is for. Shows that piece out of the way from bones and manipulations. So you can draw alternate versions without it flying off everywhere
Hey, man! love you channel! Thanks for all. Cheers from Brazil! ___ You know many people call this software Harmony, righ. maybe you could add it on tha name or tags to reach more people. Keep up on moving!
Drag your limbs/head/etc. peg layers underneath the body peg in Timeline. Then when you animate the body peg the arms and limbs will move with the body
There’s multiple pivot types in the program that can sometimes conflict with each other. For now try pasting that artwork onto a fresh layer to get a pivot that will behave itself
Thank you for the TUT. However, when I try to put body parts like arms into a bone of Torso, they're disappeared. I followed ur steps but cannot happen..
Could you do an overview comparison of the different versions of toonboom, say, from tb studio to tb animate to tb harmony? I currently have tb animate and have yet to upgrade to tb harmony although I haven't planned on upgrading anytime soon due to cost. But for what I'm planing on doing, Animate seems sufficient enough. I notice that all the tutorials focus on harmony mostly. I wish there could be more attention put towards Animate especially since Animate is pretty powerful in it's own right. One thing I notice about a comparison is that Animate doesn't have the deformation tool, whereas, Harmony does.
+Like Kane I've don't a bunch of comparisons I. The past. I try to use Essentials in my videos as often as possible. Which has a feature set very very similar to Animate.
hi there, is essentials another version of tb? Can't say I've heard of it. Would it be too much to ask for a link to one of your past videos of what you are describing, so that I could search your catalog of other related tuts at around the same time-frame.
@Onion Skin. Hi I was wondering if autopatch is available on toon boom essentials, or is it only available in the premium? Because my rig is bending the arm and I can see lines overlapping (or lines bending in a weird way). Would there be a way of solving this?
I believe it’s a premium thing I’m afraid. Using bones across a single piece arm should work a lot of the time though. Remember however that auto patch is just line art masking the colour art. So it may be possible to build your own auto patch from those components!
everytime i try to put the main arm bone using kinematic output (on the torso) it disappears and i cannot solve the problem, please help me if you know how, i'm going crazy
Camilo Morales No problem, I do wish it was in all versions though. Seems like such a cool feature, and not to have it is a little annoying. (I am using Essentials, by the way, to clarify)
What will happen if we open a Harmony Premium Rig with envelope reformers in Harmony Essentials? and what if we animate using Harmony premium with envelope deformers and we open it in Harmony Essentials?
Wow, five years later and you just saved my life. Had to adjust for the new version at a few points, but this got me there. As opposed to Toon Boom's learn portal where they try and teach you everything else other than what you need to get a basic character walking. Thanks!
I woke up this morning pretty convinced I was too dumb to work out toon boom, not for lack of trying. I did your tutorial, and it all fell apart and went south. I deleted everything, started over again, and low and behold, it's working and it's almost time for dinner. But I am animating with toon boom now officially. Very easy to follow too, which is absurdly rare in the realm of toon boom tutorials. Very good video, thank you thank you.
For those who have this problem in the Premium version: "when moving the 2 arms up 1 bone, both arms disappear." Right-click the deformation folder and then click Ungroup, you should now be able to do exactly like in the video
You are a life saver man!
Further clarification: Ungroup the torso deformation folder
thank you I couldn't figure that out.
Where is the deformation folder? I can't find it
@@cinnamon_shakes This finished the idea. Thanks.
Wow you're the best teacher on here! Thank you for not wasting time, and having a good speaking voice
This is the most motivating comment ever. It's been a long time since this one so I'll have to see it again but I do prefer to get to the point when possible. Thanks!
Agree, brilliantly made a tutorial. Straight to the point no fluff and most importantly easy to understand for a noob like me. Turning something complicated and boring as rigging into a short and fun video, definitely deserve a sub and thumbs up. Kisses :)
Just met your channel, I was terrified by a cutscene I had to make in my Animation classes in University. The teacher just showed us that bones existed, but didn't teach us how to use them, you literally saved me, man. thank you so much, an greetings from a new follower from Brazil!
bro I am in the same situation (also in brazil) we have to make a 30 second short using cutout with either toon boom or animate but its like I dont know shit. I deeply regret choosing toon boom for this...
@@yokobluu
It seems that the same video still helping us from brazil even after this whole time 😂
You created the coolest character with a full backstory in like 30 seconds lol this is great
Finally a tutorial that isn't insanely complicated. Thank you!
I've been considering using rig-based animation (or a mix of rig-based and frame-by frame) for my current project, and now I'm starting to feel grateful for the fact that I like putting characters in longcoats and frilly dresses and suchlike, rather than dreading having to animate complicated designs frame-by-frame.
I low-key thought he was rigging Gru in the thumbnail.
Same here
Same
Me too
Holy smokes this was so much easier to follow along with and makes a lot of sense!! Thanks for the straightforward tutorial! This is going to save me a lot of headache now 😂
I'm quite glad that you added so many nose bones. Thanks, chum!
Thank you for this tutorial. Most toon boom videos I find, are not beginner friendly and assume we understand the node view. I was only taught Flash in school, so opening up program is overwhelming.
MY RIGGING TEACHER IS LIKE NO DONT USE THOSE
HE DOESNT KNOW HOW TO USE THESE
THIS IS LIFECHANGING
Thank you for your Rigging with Bones.
I finally got it. It has helped me a lot
Awesome tutorial, man! I've never seen a rigging tutorial this concise and efficient before!
Super helpful tutorial! That being said, I am terrified of Nose Guy's sneezing/crying backstory
Love how fast this was! Took me roughly two hours to follow along (because I had to redo some steps + my design was a little more complex) Now I have some basic knowledge and I'll be able to make some cool animations soon ~
Rigging is not the hard part with toon boon, it's animating the rig. A walk cycle in full deformers is a nightmare, i will be glad if you know a technique to animate a walk cycle with deformer.
it´s not a nightmare in fact y very easy, I have been animating in ToonBoom for 5 years now and I can´t see me working without the deformers.
I am curious to see a good walk cycle with deformer, without feet hovering the floor, or hips doing wierd thing, i almost became bald scratching my head trying to find a good workflow for deformers walk cycles
what's your show ?
Any helpful links?
@@klem142 Wouldn't this method solve the floating floor problem?
Ive watched this video countless times. Tried building a rig today. Gave up n reverted back to this video. I forgot kinematic outputs T.T thanks for the node free tutorial
How good is this? Do you save alot of time by animating with bones? I animate the traditional way, also when I watch animations I can always tell if it has bones because of how everything moves, it looks separated, can you animate as clean as traditional animation with this?
Best Harmony teachig video seen yet
Thank you, kind sir!!! You saved my life
I'm so excited about trying this
My arms disappear when I move up the hierarchy, any clue why? I'm new at this program and I'm not sure what I'm doing wrong :(
Same
Check Teddy McPipy's explanation above!
"For those who have this problem in the Premium version: "when moving the 2 arms up 1 bone, both arms disappear." Right-click the deformation folder and then click Ungroup, you should now be able to do exactly like in the video"
Easy to comprehend, dude. Thanks for this! Gonna execute!!
so I got to 10:52 and then the arms vanished, when i put them under bone _3 don't know what I am doing wrong. Any help would be greatly appreciated!
Help me tooo...
Sunny Wiz for 20 clicking on the deformation tab changing that itself to kinematic output I was able to have it not disappear and have it grouped
@@triddy3849 thanks for helping buddy i figure it out alredy 😊
Oh, man. This video is a game changer!
Thanks for the awesome tutorial! I've been wanting to get into rigging but haven't started. This gives me a place to begin :D
Thank you! This is so helpful!
This was such a helpful tutorial!! Thank you!!
The press alt and up trick isn't working. I'm on the newest version, harmony 20. The arm isn't moving behind the torso
I have followed this tutorial a few times and keep getting stuck at the 10:45 mark when you move the 2 arms up 1 bone. When I do it (Premium Edition) both arms disappear. I have tried multiple different files with different character drawn from scratch. I simply am baffled. Also, when I create the bones for my character's body, I get 3 bones, not 4. I click exactly 5 times on my torso and still only get 3 bone layers in the timeline. Ugh.
Layer order tends to freak out a bit in the premium version because of nodes, open up the node view and tidy things up and see how things are connected together. Remember things plugged into the composite more to the left will appear higher in the layer order
Thank you!
having the same issue here. node view was a complete mess originally but i have cleaned it up, played around and still no fix. The nodes for both the arms completely disappear aswell.
i...i understand even less! WTF is that ramble of a Concept map? i understand every square is a layer, and things like bones or pegs are interconected... but still: what i'm supposed to do with that thing? how can i make my arms to not dissappear when i move them behind the body bone? what i need to modify in order to do the same as you here: ( 10:38 - 10:50) .
do you have a tutorial iun how to understand this pukey mess of a layer, Onion skin? because OOOOF! i'm dumbfounded by whatever that is
Toon boom is king of rigging
this has helped me SO MANY TIMES ugh
I thought you might want to know I am citing this video in the bibliography of my thesis (part of it was teaching myself how to animate). Currently, you being cited as Skin, Onion.
this was a huge help, thank you! There is only one thing that I couldn't keep up with: at 11:27 you move the hand inside the arm layer. When I am doing this, the hand disappears. Can you help me? Btw. I'm also using Essentials
maybe this helps someone in the future, i got the same problem and solve it going to the node view and right clicking on the torso, group, ungroup then i conected the arm to the second bone node as the tutorial does.
Thank you very much for this video!
Insanely helpful video. Thank you!
Dude! I loved this! Made me rethink my rigging - just gave you a shout-out on my rigging tut!!!
oh cheers man! Is it out yet?
My teacher teaches with the node view
i cannot believe just how many times i have asked toonboom staff about how to "layer color" just to find out theres literally a button for it thats called "draw behind" LMAO
Lmao
Also “arrange” commands with right click or Ctrl up/down to do it in post
the best tutorial ive ever found!
A little fast but very useful.Thank you
This is great turtorial, but i am having an issue - right when, after you are done rigging, you hit transform button, and then circles and bones are green, enabling you to animate .Mine turn dark red, and i am really following stef after step, and it happened as well, after i decided to do everything from the beginning. Is that some other feature? do I need to unclick something?
Ah, nevermind - just had to click "enable deformation" :D
+Muszkatela those hidden switches!
I'll add it to my trouble shooting pile for those that might hit this snag in the future. Thanks for following up!
THANKS FOR THIS, COLLINS.
I am saved
Should take a look at Bill N Back, this thing got mad potential
why is it when i do the 9:02 part, the rigging in the arm gone?
Awesome tutorial!
Save my life, thank you very much
Awesome way to explain everything, thank you!!!
This character design though, you're 6 days late for halloween XD. The bone system kind of reminds me of anime studio's bones, but more appealing with the circles to show the joints. I'm happy to see that you're making tutorials again. Please continue, I enjoy watching these videos and will eventually master these features.
Great video! I'm having a problem with the deformation process; every time I make bones it creates a "deformation" folder above them. If I put the images (the drawing that I'm deforming) in this folder my drawing disappears. What am I doing wrong? Thank you!
i have the same issue
when i create bones a deformation folder is created instead of bones layers
what you can do is create a new bone layer from your drawing layer, it will place a first bone you can move later. Then if you click with the hammer it will create other bones in other bone layers
you probably already figured it out but what I found is that you can right click the folder, and look for the expand all option
It's fine. You can click the "+" button in the deformation folder. And, if you don't want Toon Boom to automatically create a deformation folder, click the Rigging Tool, the one with the Hammer and Wrench, then at the Tool Properties tab, under Rigging Tool Options, uncheck the third icon which says "Automatically create a group when creating a deformation rig."
I know, I'm late but if you haven't solved the problem yet, I'm glad I could help :)
@@nicolassegarra513 maybe u didn't help phreephur, but u definetly saved MY day)
When I move the hand into the Group for the arm
image either disappears or doesn't link up to the arm
when I upload a picture of the top half of a body, if I put bones through an (outstretched) arm and move the arm/bones it drags the edge of the torso with. It, how do I make it move seperate to the body , it is a one layer pencil drawing that has been scanned and uploaded. I Would be massively grateful for a reply. What seems like such an easy fix I cannot work it out, thanks
When I'm placing L or R_arm kinematic Output under the Torso bone, the kinematic output just disappearing and It's not working along with the torso. Please help me...
this was so helpful!! thanks so much!
If i wanted to switch the hand from one drawing to another during the animation, would this let me do that? I'm considering switching from flash.
+Elliot's Toons indeed! You can swap drawings mid tween. I'll be demonstrating it in the follow up to this video
Nice! I'm looking forward to it!
Very helpful!! Cheers mate!
Great tutorial! Still not sure I understand the difference between KO and Pegs though. Can someone explain it to me a bit more?
this was great help except I got kinda loss when you got to kinematic output. I mean it's a super easy way (thank you) to rig it adding pegs etc from the timeline lol but I learned do add the KO and peg thru the node view, seeing the entire hierarchy branching off and seeing the parent child relationship between each layers and bones etc and placing them to their respective location
in all this opened a new light makes it MUCH SIMPLE! I don't have to stress myself anymore with the node view ;-;
good video
YESS I learned it through the node view too but using the node view is SO confusing, it gives me a headache
The boning is much like anime studio bone layout
Ok so this has bee really helpful so far but now when I only want to move the face the eyes, mouth etc dont go with it and just stay in place. What can I do about this?? (im on harmony premium 17)
i'm new toon boom. i'm trying to use the rigging tool. i set up my deformation chain, i go to deform it but by second or third frame m drawing goes back to where it was before i just moved it and the only thing i can move is the chain. what's the problem?
Hey thank you for such an informative tutorial. Ive never done this before so im struggling a bit. After i color in each layer, when i turn the light table off, i cant get all the layers to show as one so i can begin rigging. When i select the "main drawing" it just shows the uncolored layer before i began adding color. What did i do wrong?
10:55
Master ! Could you please Explain this Part (how to move the head without moving shoulders )🙏🏼🥺
Please, a Humble request from your Fan/Subscriber
Hi! Thank you for the tutorial, I’m having an issue with rigging my own character in which it doesn’t recognise the different layers and only animates the one parent layer after adding bones . If I group them together, it will animate the whole thing and won’t recognise different layers for different objects. I exported this cutout as vectors from Illustrator if it helps, Any help I can get will be really appreciated, thank you!
Try giving each of those parts a parent peg each
@@OnionSkin I've also ended up getting a pdf about rigging cause I knew less about pegs than I thought, I'm finally starting to understand Toonboom now, between that and your tutorials, thank you! 😅
Great video! Can you answer a question please? I have created a character, added a pivot to each limb, I can only rotate the limbs with animation mode (the little man) turned off? Why is that?
Also if I copied the character and put him on a different frame, (hit alt Shift 5 so I am not exactly copying) and adjust him, the my original frame is also adjusted! What am I doing wrong?
Wow such a sad story I really feel for the character 😂
Question, you put a peg on the Head group before adding it to the Kinematic Output, but not for the right arm or left arm... if you want to animate the arms don't they need a peg too? I was under the impression that all the assets or bones needed a peg... idk!!
Why can't my bone circle thingies resize? Im clicking it and dragging but its not enlarging
incredible!!!
Super helpful. Now I have FootBonesMasterPeg.
In my setup, I can´t fix de feet on the ground, like the After effects does with the puppet tool. When i mov the pelvis, and he is the main in the entire chain, everything moves. Looking for answers, i discover that the premium version has a mechanism to do that. Then, the question is: Can i solve this with the advanced version?
the hammer spanner does not actually link to my drawn elements?
I can't figure out what he did at 3:50, what exactly did he do to close the gap?
Click the Paint tool, then click again, a small window beside it will appear with the additional tools, click Stroke. The strokes will be invisible by default, so press "K" and it will appear. Then you can draw the stroke now.
I added bones to separate objects but dragging one of them drags all. And this video is not explaining why.
Can you please try out Moho 12 and compare it to TB? :)
hi, im trying your method but my hand deforms with the bones... is there a way to have the hand being parented to the bone but not being deformed by it? thanks!
Kinematic Output Node
Only thing I can't seem to understand is how when you finish coloring and turn the lightbulb off you can see the whole drawing with all the colors. I can't see that, it only shows whats on that layer instead of the whole picture. Don't know what I personally did wrong there.
Sounds like you’re looking at the drawings view not the camera view
when I put all the different limbs in each leyer and I press the light bulb all the lims dont show up, its only the one I am on
Very nice tutorial there, but won't inverting the bone order on the leg cause issues for walking?
+Antonio Correnti oh you'll see ;)
Aren't you saying that this video will have a sequel? :-D
The problem I always come across when I use bone puppets like this is I cant edit the drawing after its boned if I want to make changes. It like alters the drawing and pushes it off. If you press k you can find it and kinda edit it but its a pain and doesnt really work. I find it easier to just use ctrl alt shift d and make multple body parts
This is what the drawing view is for. Shows that piece out of the way from bones and manipulations. So you can draw alternate versions without it flying off everywhere
@@OnionSkin omg i love you. I never put those 2 things together like that im an idiot. You the man
Hey, man! love you channel! Thanks for all. Cheers from Brazil!
___ You know many people call this software Harmony, righ. maybe you could add it on tha name or tags to reach more people.
Keep up on moving!
When I move the arms, they detach from the body. Maybe I need to properly place the deformation points?
Drag your limbs/head/etc. peg layers underneath the body peg in Timeline. Then when you animate the body peg the arms and limbs will move with the body
My pivot point for my hand isn't following the hand's new position. It makes rotating it really awkward
There’s multiple pivot types in the program that can sometimes conflict with each other. For now try pasting that artwork onto a fresh layer to get a pivot that will behave itself
You're saving my life!!
Although, I'm curious to see what the nodeview looks like on this, do you never use it?
Most of my recent videos have been diving further into the node view, have a peek!
@@OnionSkin Thank you so much! You're a great help
Rigged the bone structure but cant adjust the circles without it effecting the drawing, am I doing something wrong?
Ex-Poser Toons yes you are changing the circles in transform mode. You should be in bone tool mode(hammer and wrench)
Thank you for the TUT. However, when I try to put body parts like arms into a bone of Torso, they're disappeared. I followed ur steps but cannot happen..
same for me to. would also like some help with this
What exactly do you mean? Maybe I could help.
If I bring in an illustrator vector character, will this still work?
Hey, would you Color all the body parts before rigging everything or after ?
I usually colour first these days, because things often need to be split and filtered with sub layers and stuff
Could you do an overview comparison of the different versions of toonboom, say, from tb studio to tb animate to tb harmony?
I currently have tb animate and have yet to upgrade to tb harmony although I haven't planned on upgrading anytime soon due to cost. But for what I'm planing on doing, Animate seems sufficient enough. I notice that all the tutorials focus on harmony mostly. I wish there could be more attention put towards Animate especially since Animate is pretty powerful in it's own right.
One thing I notice about a comparison is that Animate doesn't have the deformation tool, whereas, Harmony does.
+Like Kane I've don't a bunch of comparisons I. The past. I try to use Essentials in my videos as often as possible. Which has a feature set very very similar to Animate.
hi there, is essentials another version of tb? Can't say I've heard of it. Would it be too much to ask for a link to one of your past videos of what you are describing, so that I could search your catalog of other related tuts at around the same time-frame.
@Onion Skin. Hi I was wondering if autopatch is available on toon boom essentials, or is it only available in the premium? Because my rig is bending the arm and I can see lines overlapping (or lines bending in a weird way). Would there be a way of solving this?
I believe it’s a premium thing I’m afraid. Using bones across a single piece arm should work a lot of the time though.
Remember however that auto patch is just line art masking the colour art. So it may be possible to build your own auto patch from those components!
how to save only switch mouth Lear in moho library.....please reply me....please ....
everytime i try to put the main arm bone using kinematic output (on the torso) it disappears and i cannot solve the problem, please help me if you know how, i'm going crazy
Late to this comment Soz, did you ever figure it out?
Thank you!!!!
Nice, very good rigg i´m gonna try the inverted deformer on the legs, but what about the "NETWORK" or "NODE VIEW" It´s so easy and intuitive
Essentials does not have the node view, it is only in Premium.
LucasSaturn ooowww right....sorry
Camilo Morales No problem, I do wish it was in all versions though. Seems like such a cool feature, and not to have it is a little annoying.
(I am using Essentials, by the way, to clarify)
Incredibly and unnecessarily confusing.
Why unnecessarily you can reuse it
Useful if your willing to spend 4 hours like me
exactly he lost meee
What will happen if we open a Harmony Premium Rig with envelope reformers in Harmony Essentials? and what if we animate using Harmony premium with envelope deformers and we open it in Harmony Essentials?
Onion Skin Why are the legs not pinned to the torso? Its difficult to animate the legs with the bones starting from ankle as well