Leave a like if you would like to see an Apprentice Wife Swap with Artisan & Bundy. Thanks to Tradify for sponsoring this video. Get 50% Off your first 3 months using our discount code "ARTISAN" here: bit.ly/3JYPCD2
Yes “apprentice swap” would be a really good idea, get Adam exposed to EV stuff and Ruben exposed to.... the midlands 😂, really good to see Adam progressing and his confidence shines through, well done Adam your doing good, keep up the standard and stick in at college
Very good episode, although you should have left the part in where you discovered the hypervolt was mounted too close to the downcomer and you had to move it across ;)
love the electricians cumunity on RUclips its brilliant you guys at artizan and nick bundy are all I watch im currently in the middle of my level 3 to then be followed by 2391-52 .... im currently running my own buisness installing kitchens and bathrooms .... p.s I do have an electrician come to do my electrics 😂 all the proper ways I know you lads slate fitters but not every one of em are the same I can vouch for that 😊 ... eventually I will be completing my nvq and my am2 in the long haul. so hopefully be joining the sparky movements in the very near future thanks for all the information and quality of work you guys put out there! I absolutely love that nick bundy has these other companies come together like his house rewire he done a short while ago too its good spirit to see ... keep it up! and thanks again
Good luck with the NVQ level 3 and am2 exam mate. You dont just qualify and then go for your Inspection and testing though pal. Experience comes before being an approved electrician. Good luck
@@adamsharp201 thanks mate ive been doing bits and learning on my own installs with an electrician over the last 2 to 3 years I've now passed my 2365 ... also passed my inspection and testing 2391-52.... recently I studied last year the domestic electrician fast track and 18th edition ect I could of registered last year before they changed the requirements I just felt I wasn't particularly ready and full of confidence at that time... I've done fuse board changes kitchen re-wires bath spa shed re-wires ect under supervision of my qualified electrician. But again he's only a domestic electrician himself. I'm getting there I'm hopefully getting on the nvq 2357 this weekend and then I can look over the requirements for the units and proof ... get that sorted and once I feel I'm achieving the required evidence I'll then go and do my am2
Having watched both channels for a while now and learning loads, it's lovely to see you these two legends join forces for abit. A little like the avengers finally teaming up in Marvels 😜
I did think the loop into the charger was going to be very tight where it was fitted but thats all part of the learning curve. Really enjoy the vlogs as a UK sparky living in Oz for twenty years now.
Amazing video episode! Love to watch your video Apprentice swap sounds like a great idea. Cory and Reuben up north helping Nick and Adam do a house rewire. Awesome Nick took together with Jordan. Great team job! "Eat at Joe's!" haha Thumbs up! Cheers!
Definitely want to see Nick & Reuben team up & Cory & Adam do the same, would make for some interesting viewing for sure,also we need a Cory,Nick, Reuben & Adam vid.Aaaand an all star vid starring, Jordan,Cory,Nick, Reuben, Adam,David,Nigel,Thomas &Chris,now that's a line up😁🔌⚡🔌⚡
It’d definitely be good Adam and Reuben swapping, mainly because of what Adam said in that he and Nick mainly do house bashing whereas Artisan are for EV Chargers. But it may also be good Adam working with Reuben, because it feels like Adam is at the stage where he knows what’s needed to be done and gets what he needs to be ready, ready. And also he can give Reuben a slightly more experienced apprentices advice and any slip up’s that Adam has made and how to avoid them will still be quite fresh. Would also be interesting to see Dave Savery and Nigel’s take on doing an EV charger install, I can see them providing some interesting/different ideas. The same for CJR, I’ve only seen him do one EV charger so far, and his experience with building construction, would be good for cable routing. In fact there’s quite a few up and coming channels and all the people are good and constantly improving on there too. Great video as always!
Great collaboration, great instal. I think the apprentice swap would be great for all ,A) for the apprentices work experience, and B) for Nick and Cory having to teach someone new
WOW, such a great Colab between both, great job, great video, long awaited, but well worth it (will Artisan go North now, for another one?) Really like the ending too, both the "what is it" - "it's a prawn Nick" and the van defrosting, all good humour and fantastic content. Well done all, and OMG the Apprentice Wife swap MUST happen :) look fwd to that. Really hope Nick makes it to 100k subs, as all genuine people. Thumbs up 100%.... :)
Did the EV charger move? Towards the beginning of video it looks really close to the drain pipe and then at the end you see the tether being wrapped about the charger with more space.
Huh just learnt more about Type AB/ A / C RCDs I knew we used type A? For EV chargers but none of my tradesmen could tell me why, I assume it was to detect a DC fault current which didn’t make sense as it’s isolated thru a transformer somwhere along the line
Just searched through all of the comments here trying to figure that out. I can’t wait to have a better bag to carry my labeler! The rigid case it comes with is so unwieldy and obnoxious.
Fantastic collab guys, really enjoyed it. You 💯 have to the apprentice (son) swap although Reuben will need to get his own YT channel up and running to compete with Adam 😂
I’m pretty sure the charger was moved, it looked too close to the down pipe, movie magic (they didn’t show the error correction). or am i crazy. good lesson learned maybe, bit more space to wrap the cable up.
We've had a lot of issues with the latest version of Hypervolt. They're disconnecting from Wifi after a period of time and then you can't connect to the device again. Every charge is showing as the same cost (£) and the locking of the device fails often. Hypervolt are aware of this but there's no fix currently.
watch these 2 regularly, but this is not one of the better ones imho, electrical content seemed to take second place, to food, mutual backslapping nd more food, the apprentice swap would be good and very beneficial to both lads
Leave a like if you would like to see an Apprentice Wife Swap with Artisan & Bundy.
Thanks to Tradify for sponsoring this video. Get 50% Off your first 3 months using our discount code "ARTISAN" here: bit.ly/3JYPCD2
Ruban with Uncle Nick instead of Daddy Cory?
Defoooooo
Talking about shocks don't get yourself between load carrying neutrals! Enough load AND YOU WONT GET OFF!
Thanks for having us guys 🙌
What a pleasure mate! Thanks for coming to see us.
The moral I am taking away from this tale is "getting thin is too expensive, stay chunky"
Nick which Course did you do for the EV chargers and where? Cheers
More collabs! Great content.
Being an avid viewer of both channels this was great to see. Hope some of you show Nick & Adam some love with the subs let's get him up to 100K
Yes “apprentice swap” would be a really good idea, get Adam exposed to EV stuff and Ruben exposed to.... the midlands 😂, really good to see Adam progressing and his confidence shines through, well done Adam your doing good, keep up the standard and stick in at college
The midlands 😂😂😂
What’s wrong with the midlands😂
Very good episode, although you should have left the part in where you discovered the hypervolt was mounted too close to the downcomer and you had to move it across ;)
Nice to see a EV install make an appearance on this food program 🤣
Great video. Apprentice swap sounds like a great idea. Cory and Reuben up north helping Nick and Adam do a house rewire. Make it so...
Swap apprentices! Wanna see Reuben put through his paces! 😄
What a crossover episode !!😂 I’m going to enjoy this definitely
love the electricians cumunity on RUclips its brilliant you guys at artizan and nick bundy are all I watch im currently in the middle of my level 3 to then be followed by 2391-52 .... im currently running my own buisness installing kitchens and bathrooms .... p.s I do have an electrician come to do my electrics 😂 all the proper ways I know you lads slate fitters but not every one of em are the same I can vouch for that 😊 ... eventually I will be completing my nvq and my am2 in the long haul. so hopefully be joining the sparky movements in the very near future thanks for all the information and quality of work you guys put out there! I absolutely love that nick bundy has these other companies come together like his house rewire he done a short while ago too its good spirit to see ... keep it up! and thanks again
Good luck with the NVQ level 3 and am2 exam mate. You dont just qualify and then go for your Inspection and testing though pal. Experience comes before being an approved electrician. Good luck
@@adamsharp201 thanks mate ive been doing bits and learning on my own installs with an electrician over the last 2 to 3 years I've now passed my 2365 ... also passed my inspection and testing 2391-52.... recently I studied last year the domestic electrician fast track and 18th edition ect I could of registered last year before they changed the requirements I just felt I wasn't particularly ready and full of confidence at that time... I've done fuse board changes kitchen re-wires bath spa shed re-wires ect under supervision of my qualified electrician. But again he's only a domestic electrician himself. I'm getting there I'm hopefully getting on the nvq 2357 this weekend and then I can look over the requirements for the units and proof ... get that sorted and once I feel I'm achieving the required evidence I'll then go and do my am2
Having watched both channels for a while now and learning loads, it's lovely to see you these two legends join forces for abit. A little like the avengers finally teaming up in Marvels 😜
Love the banter. Fantastic video as always guys. Love both Nick Bundy & Adam and the whole Artisan team. Xx
I did think the loop into the charger was going to be very tight where it was fitted but thats all part of the learning curve. Really enjoy the vlogs as a UK sparky living in Oz for twenty years now.
THIS IS BIGGER THAN ENDGAME
im not even wanting to be an electrician i just love the channels for the entertainment so exciteddddd
😂😂😂
@@artisanelectrics this will break box office records this will be the biggest thing to ever happen since the big bang
The crossover we have been waiting for 🙌
Apprentice swap nice idea Good to see Nick & Adam learning new things.
Brilliant video, loved the conceal behind the downpipe guys
This is definitely 100% the dream team
Great Vid, alot of funny moments, the label on the board was a great part ha ha :)
Amazing video episode! Love to watch your video Apprentice swap sounds like a great idea. Cory and Reuben up north helping Nick and Adam do a house rewire. Awesome Nick took together with Jordan. Great team job! "Eat at Joe's!" haha Thumbs up! Cheers!
BRILLIANT... Jordan, you defiantly know how to look after your guests :) Enjoyed the last few minutes especially.
You 3 are the original “ THREE MUSKETEERS “ !!!
Great rivalry,. Good to see you guys together...
Hi guys Been a subscribers to both of you it's really nice seeing you together learning from each other keep it up
Definitely want to see Nick & Reuben team up & Cory & Adam do the same, would make for some interesting viewing for sure,also we need a Cory,Nick, Reuben & Adam vid.Aaaand an all star vid starring, Jordan,Cory,Nick, Reuben, Adam,David,Nigel,Thomas &Chris,now that's a line up😁🔌⚡🔌⚡
It’d definitely be good Adam and Reuben swapping, mainly because of what Adam said in that he and Nick mainly do house bashing whereas Artisan are for EV Chargers. But it may also be good Adam working with Reuben, because it feels like Adam is at the stage where he knows what’s needed to be done and gets what he needs to be ready, ready. And also he can give Reuben a slightly more experienced apprentices advice and any slip up’s that Adam has made and how to avoid them will still be quite fresh. Would also be interesting to see Dave Savery and Nigel’s take on doing an EV charger install, I can see them providing some interesting/different ideas. The same for CJR, I’ve only seen him do one EV charger so far, and his experience with building construction, would be good for cable routing. In fact there’s quite a few up and coming channels and all the people are good and constantly improving on there too. Great video as always!
Love how you're both slightly smirking as the hypervolt moves 6" right so the cable fits :) By the way that's on you Corey mate :)
Can't wait for this,just need Jordan Farley, David Slavery & Nigel Marsh for an all star electrical Collab,come on make it happen!!!🔌🎇⚡🌩️
+ Thomas Nagy!
@@AndrewLumsden absolutely,I knew there was someone I was forgetting,that'd be awesome,to have all those dudes in one video 🔌⚡
Great collaboration, great instal. I think the apprentice swap would be great for all ,A) for the apprentices work experience, and B) for Nick and Cory having to teach someone new
Banging crossover episode. 👍
Love the pop-up table - "centre island" once you got back to the office!!
Never mind the electrics, what about the food, looked great 👍😂
If I was the homeowner I'd be so annoyed catching my arm on the hypervolt connector cable loop every time I exited the gate!
Brilliant! & yes definitely swap for a couple of weeks, it'd be hilarious, send Adam to Rubens college and vice versa.
3 days til premier??... Wow, someone was eager .
Loving the long life multi tool blade hack hahaha I know what I’m doing in the morning
Great Content guys and Teaming up with Nick bundy ⚡️👊
I want some elecbros they have the biggest alloys, darkest tints and best tattoos in the entire building industry
Definitely an apprentice swap. 👍🏼
WOW, such a great Colab between both, great job, great video, long awaited, but well worth it (will Artisan go North now, for another one?) Really like the ending too, both the "what is it" - "it's a prawn Nick" and the van defrosting, all good humour and fantastic content. Well done all, and OMG the Apprentice Wife swap MUST happen :) look fwd to that. Really hope Nick makes it to 100k subs, as all genuine people. Thumbs up 100%.... :)
The best ace Ventura saying is captain I don’t have the power 😂😂
More NB and Artisan cross overs are needed
When I saw Adam mounting that hypervolt I thought that's a bit close to the old drain pipe? Did you have to move it?
That’s what I thought, sure they moved it so the cable can wrap round. Notice at the end the 5.5 holes just above.
This chat about nipples, dad bods & no toxicity, everyone just being comfortable with eachother it’s funny to watch 😀 keep up the good work
love the little giant , recently got one
Great video !! You can learn so much as an outside learner with these guy’s knowledge combined
What an awesome video. The colab is FANTASTIC! And its great seeing Adam taking it all in his stride. And yes please for an apprentice swap video.
Congrats on the 1-year membership Jim! What a legend!
@@artisanelectrics Thanks, One year already, wow
Did the EV charger move? Towards the beginning of video it looks really close to the drain pipe and then at the end you see the tether being wrapped about the charger with more space.
great video to see my 2 favourite youtubers, cory and adam.
Great collaboration video. Lots of banter. Should work more together.
No display on hypervolt so the height of 750mm-1200mm applies
Hah Nick got his own slow motion drilling shot finally 🤣
brilliant video, nice ending, well done all
Huh just learnt more about Type AB/ A / C RCDs I knew we used type A? For EV chargers but none of my tradesmen could tell me why, I assume it was to detect a DC fault current which didn’t make sense as it’s isolated thru a transformer somwhere along the line
great video guys . yes love to see apprentice swop
surely it would of been a neater finish and a lot quicker to put the square of plasterboard you cut out back in than chomp out a good drylining box?
@NBundyElectrical When is that labelling bag out? :D
Awesome video guys
I asked Google what’s the opposite to Artisan - and it said Bungling - that reminds me of someone! 😂 I’m only joking! 😂 Great video as always lads.
The food was just as good to look at as the electrics 😁😁
Nice to see you all together guys 👌 you should definitely swap apprentices
Great video 😎
Are the velocity label bags available yet?
Just searched through all of the comments here trying to figure that out. I can’t wait to have a better bag to carry my labeler! The rigid case it comes with is so unwieldy and obnoxious.
Nice combination
Release it today.
Fantastic collab guys, really enjoyed it. You 💯 have to the apprentice (son) swap although Reuben will need to get his own YT channel up and running to compete with Adam 😂
Watching both of your channels, good stuff!
Really enjoyed the video.
I'm a chippy by trade but I can't get enough of theses vids 😂
Yes “apprentice swap” would be a really good idea,
Great video guys ! Keep up the good work 💪
Yes the boys!! ⚡️😎
Yes - would love to see apprentice swap. Also would love to see David Savery insult Cory xxxx
Please this guy !!!!!!!!
I’m pretty sure the charger was moved, it looked too close to the down pipe, movie magic (they didn’t show the error correction). or am i crazy. good lesson learned maybe, bit more space to wrap the cable up.
Awesome video, defo do a Adam and Ruben swap 😀 👍
What brand of work jeans are they please?
Where was the asbestos in the walls? You where drilling and multitooling it!
Great episode guys! Would love to see an apprentice "wife swap" 😆
Hi where can I buy the work wear jackets worn buy your staff (obviously without Artisan name)?
We've had a lot of issues with the latest version of Hypervolt. They're disconnecting from Wifi after a period of time and then you can't connect to the device again. Every charge is showing as the same cost (£) and the locking of the device fails often. Hypervolt are aware of this but there's no fix currently.
Good to know 👍🏻
Nick just spent the whole video promoting stuff😂
I thought Endgame was the best crossover … I was wrong. 😂Great content as always !
This was funnier than expected 🤣
di tungguin dari indonesia nih bos
😂 good video guys 👌🏼
Your jeans/trousers are so cool, where can I get these? Great Channel.....!
Blaklader 👍
What is that tool that Nick pulls out and says ' this does everything'?
Good laugh guys,great Vlog as usual.
Typical.. I wait 3 days for this to finally play...
And then 30minutes before it finally starts, I fall asleep...
😅😅😅
Take the artisan team to one of your house rewires 😂 and a apprentice swap would be good
The amount of adverts was driving me bonkers 😬
Dream teams unite ….
watch these 2 regularly, but this is not one of the better ones imho, electrical content seemed to take second place, to food, mutual backslapping nd more food, the apprentice swap would be good and very beneficial to both lads
You didn't really stick your sticker/company logo on that CU did you Nick.? lol
Jolly nice
Get a Belt - must admit leat I can hear you all on your video’s.. Nik needs this mic system, tell him to update his sound ..
21:00 🤣
Has Jordan got a personal adviser on dress code for presentations etc ?
Funny as always Nicki boy bundy