I did it as you did and it worked and the signal and speed doubled, thank you for the great explanation, we wish you had new updates to give us a better result with a new video
hi great video, i have one question what's the name of that adaptor at the end that connect the coax to the smaller plug on the usb so i can find one at internet?
salem Thanks for this awesome antenna for the 1800 MHz frequency. I noticed while watching the video that the S parameter was 13.6. However, when you took the measurements with the slide rule , the S parameter was 10.3. The same goes for the second feed, where the S parameter was also 10.3. So, I'm wondering if the S parameter is 10.3 mm or 13.6 mm I need the answer because I made one based on S=13.6 thank you
Hi friend! Everything is correct, it should be 13.6 mm. On my slide rule 0 is not from the very beginning and that is why it seemed to you that there were 10.3 mm.
Hi Chriss! Try to make such an antenna drive.google.com/file/d/1t-iVfLMBrdHJc2JidAOBmitwJgcWZ_j0/view?usp=share_link with such characteristics: docs.google.com/document/d/1o_XG_gQCe4LwpyfhIWduAKW2a8Z8mHU_/edit?usp=share_link&ouid=114692681563419485154&rtpof=true&sd=true
Can u tell about range of this anteena? how many area covered with this and how long range this anteena catch ( in kilometres). How to use it on My Tenda N300 Router please explain briefly please.. i need this
هل من الممكن عمل الأقراص بالمقاسات الموضحة وبها كسور من الملمتر تقدر بالميكرون بالادوات البسيطة الموجودة بالفديو الفكرة رائعة ولكن التنفيذ بهذة الأدوات البسيطة للمقاسات الدقيقة صعب
You make the best you can, and it works depends of that you make. Let's say the discs are not true - it will amplify probably 10% less. So instead of 19km the range will be like 13km. Still not bad for metal that cost $5, right?
To boost ur upload u probably need to change the BAND in ur modem, stop using 4g pendrive, try tp link-mr 6400 v5.3 or tp link-mr 600, i think is the best buy
* Thanks for your comments! *
Cual es la fórmula para una antena de 900 MHz?
@@Ridefox2025 ruclips.net/video/XTTE8shzOfg/видео.html
@@Ridefox20258:49
@@Ridefox2025❤❤❤❤❤❤❤❤,,,
stop fooling people lol
I did it as you did and it worked and the signal and speed doubled, thank you for the great explanation, we wish you had new updates to give us a better result with a new video
Enjoyed the build. Very ingenious...
Hola ese plano de antena de donde lo busco x favor de que sitio o página
You need to isolate the driven disk ie 2nd largest from the boom orherwise your vswr will be way off , itll esp effect your upload speeds
You are probably right but I don't want to try😀
Cual seria la forma correcta de aislarlo?
Hey Man i like you video to get a 4G LTE connection, it is not logical that it would work without the SIM card being activated
Thank you
Hi! Thank you too my friend!😉
I tri it its very very useful
Thank you very much ❤
Hello.
I want to know how many millimeters is the thickness of that metal?
I need to know
Hi! The thickness is the same as a coffee jar😀😉
Quel métal utilisé pour les disques ??
I used regular thin steel. After the winter they were covered with a thin layer of rust.
hi great video, i have one question what's the name of that adaptor at the end that connect the coax to the smaller plug on the usb so i can find one at internet?
TS9 male to SMA Female converter
but it depends on which device you have
Más falso que las promesas de mi ex
Can I use oil tank to make the disks?
I think it's possible! I used metal similar to coffee cans😉
Ok, thanks man
I will give it a try when my oil tank finish
Why two F connectors instead of just one ?
What size of Threaded Bar you use 6 or 8?
8 mm
thank you so much ,,,, can u please send the 800 MHz design ? or how it's calculated ?
Hi! Please google translate this article - 3g-aerial.biz/4g-lte-uhf-antenna . All sizes are listed. I think it will help you!?👍
@@lebecky_restoration thank you so much again ,,, will check it 👍
Can we make it from aluminium sheet??
Maybe?! I just didn't have aluminum. I made it out of thin metal like a coffee can😉
salem
Thanks for this awesome antenna for the 1800 MHz frequency. I noticed while watching the video that the S parameter was 13.6. However, when you took the measurements with the slide rule , the S parameter was 10.3. The same goes for the second feed, where the S parameter was also 10.3. So, I'm wondering if the S parameter is 10.3 mm or 13.6 mm
I need the answer because I made one based on S=13.6
thank you
Hi friend! Everything is correct, it should be 13.6 mm. On my slide rule 0 is not from the very beginning and that is why it seemed to you that there were 10.3 mm.
Do you need any lightning arrestors?
No, I didn't use a lightning arrestors! Nothing happened in 3 years😀
does it recive only 1800 MHz?? how do I modify it to receive other frequencies like 2300 and so on
Hi, should i make 2 of these if my router has 2 antennae and suports MIMO?
No 1 is enough
I also think that one is enough👌
Se puede fabricar una antena del mismo modelo al del vídeo pero de 900 MHz 3G wcdma y 1800 MHz 4G lte?
Hi Chriss! Try to make such an antenna drive.google.com/file/d/1t-iVfLMBrdHJc2JidAOBmitwJgcWZ_j0/view?usp=share_link with such characteristics: docs.google.com/document/d/1o_XG_gQCe4LwpyfhIWduAKW2a8Z8mHU_/edit?usp=share_link&ouid=114692681563419485154&rtpof=true&sd=true
como la calculo para 2600 mhz?
What is the type of iron?
I made this antenna from regular steel! After a year it got a little rusty but it works fine😉
Can i use food aluminium tin for it
I haven't tried it, but I think it should work
Brother, what material is used on the plate in this antenna? Plz reply
Hi! I used thin steel like coffee cans😀 Everything works, just a little rusty
Can we make antenna with others design?
Btw you use what metal? alloy or zink?
I used regular thin steel.
Nice Antenna. Good Work ! what metal is that? Steel? thx
Yes, it's steel. It has rusted a little in two years, but the antenna works properly.😉
Can u tell about range of this anteena?
how many area covered with this and how long range this anteena catch ( in kilometres).
How to use it on My Tenda N300 Router please explain briefly please..
i need this
Yo las hago de Aluminio (Al)
@@DanielChavez-bhy Que tal funcionan en aluminio?
Make it of aluminum Is very better, because do not oxide so fast AND work very good
cool, thank you!
Cd is disk hard?
Thanks bro ❤
😉👍
what kind of cable did you use?
Hi! I used coaxical cable, 75 Ohm!
Mano, como que conecta essa antena no celular?
Para um celular você precisa usar um repetidor. Ou faça você mesmo, por exemplo ruclips.net/video/oaX9y0ViIMc/видео.html
Can i use it at 15km?
Is your simcard inside the modem?😮
Yes, that's right!
Bro plz reply bro which plate material use name plz
Hi! I used thin steel like coffee cans😀 Everything works, just a little rusty
هل من الممكن عمل الأقراص بالمقاسات الموضحة وبها كسور من الملمتر تقدر بالميكرون بالادوات البسيطة الموجودة بالفديو الفكرة رائعة ولكن التنفيذ بهذة الأدوات البسيطة للمقاسات الدقيقة صعب
You make the best you can, and it works depends of that you make. Let's say the discs are not true - it will amplify probably 10% less. So instead of 19km the range will be like 13km. Still not bad for metal that cost $5, right?
Hi thanks for the video i have a question do we need to isolate the 2nd disc from other part ? Also can i use zink disc ?
Hi! I made all the wheels out of metal
Monsieur , s'il vous plaît.... Est que tu as isolé l'un des disque ???
The name of the material used
Steel
May i ask, what type of connector u are using in the reflector disc, any tutorial ? Can u send a link?
Hi! I used this type of connectors: 1. alii.pub/6o84wi 2. alii.pub/6o84xa 3. for modem alii.pub/6o84xv
هل يمكنك ارسال النموذج والقياسات والتصميم❤❤❤❤❤
This is 4g+, right? aggregation
Shouldn’t you separate the second disk from the other disks and the bolt??
Also did you try to put it in a satellite dish??
You don't need to separate the second disk. This antenna finds the signal from the tower at about 9 km.
Has anyone made this? Does it work?
هل يدعم تردد 1800
Yes!
thank you
To boost ur upload u probably need to change the BAND in ur modem, stop using 4g pendrive, try tp link-mr 6400 v5.3 or tp link-mr 600, i think is the best buy
Can I use f connector on mr 600 without any converter?
Isolate the second element from the rest of all !
Did you get better results doing that?
@@davosam1968 before that I got -94dbm but after that I got -80dbm on my Huawei B310s 927 4g Lte Device.
@@adnan-usman-1 second element is the second biggest right
4G LTE
Do it for me 😁 please 😊
👍😀
lol