- Видео 7
- Просмотров 1 091 094
Lebecky Restoration
США
Добавлен 8 апр 2020
Hello. My name is Alex Lebecky.
On this channel I will upload videos about some things that I will do with my own hands.
I don't like to talk a lot. So I'll work without talking))
Please, subscribe to my channel. I will try to work for you! Thank's.
On this channel I will upload videos about some things that I will do with my own hands.
I don't like to talk a lot. So I'll work without talking))
Please, subscribe to my channel. I will try to work for you! Thank's.
Restoration with Stick WELDER and Paint ROLLER.
I did this restoration in August 2021.
It's 2024 now! Everything is fine with the car, you can see for yourself
Full video: ruclips.net/video/9BVM8ujCGFU/видео.html (Rusty CAR BODY Restoration)
Thank you for watching.
It's 2024 now! Everything is fine with the car, you can see for yourself
Full video: ruclips.net/video/9BVM8ujCGFU/видео.html (Rusty CAR BODY Restoration)
Thank you for watching.
Просмотров: 2 179
Видео
Soviet Motorcycle Restoration (Dnepr) + Easy Tuning
Просмотров 2,1 тыс.2 года назад
When I was 16 I restored an old Soviet motorcycle Dnepr. It was 2005. I didn't have a video camera at the time. I did not have sufficient skills and money at that moment. I hope you enjoy my work. Thank you for watching!
WIPER BLADE ARMS Restoration
Просмотров 1,8 тыс.2 года назад
In this video, I restored the rusty wiper blade arms from my car and painted them with black semi-gloss spray paint. I made rust removal with a very effective composition, which you can see in the video. I primed the 2k epoxy primer in a way that you have not seen anywhere else!))) I am very pleased with the result. Now my wipers look like new! Please subscribe to my channel and leave feedback!...
AIRBAG SPIRAL CABLE - REPAIR
Просмотров 19 тыс.2 года назад
In this video i repaired the airbag spiral cable from my car. My car had a non-working horn and airbag error. I did this repair a year and a half ago! Everything works! Thank you for watching. Please give me feedback which restorations would you like to see?
Rusty CAR BODY Restoration. I used MMA inverter (Stick WELDER) + Paint ROLLER
Просмотров 1 млн2 года назад
This video shows the entire process of restoring the rusty part of the car. I performed metal welding with an MMA inverter. The painting was done with a construction roller without professional equipment. This car two years later (3 winter): ruclips.net/video/hBYmDf0SoyU/видео.html I'm happy with the result! Thank you for watching.
I made a 4G LTE antenna (1800 MHz) with my own hands. Internet works!
Просмотров 59 тыс.3 года назад
In this video I will show you how I made 4G antenna with my own hands. The Internet did not work at all before! Distance to the station of the mobile operator is about 13 km (about 8 miles). This antenna is designed for 1800 MHz frequency. If you like this video, please click like and subscribe to my the channel! p.s. English is not my native language, but I will try to learn it. If I made a mi...
Всё нормально сделано , но зачем электродом варить , нет полуавтомата ?
They didn't have mig welding in the 50s through the 70s so stick welding was the only way
Well he must be pretty good
Ενα Like σε οσους θυμησε το ΣΚΥLINE για οσους ξερουν! 😂😂
6013 1.6mm 50 60 amp
Can you tell me the grade of electrode uses and approximate amperage? Is this 6013?
Hi! In this video I used 2.0 mm electrodes, but I think that 1.6 mm would be better (I could not buy 1.6 mm) I did from 40 to 60 A. Where I used thick metal (1.5 -1.7 mm), I set about 55A. Where I used thin metal (the outer panel is less than 1.0 mm.) I reduced it to 40A. But this device, has an easy start and at the beginning of work, it increases the current strength automatically. That is, even if you set 40 A, then in the first second, the device can increase even above 80A!( There's nothing you can do about it. This is a device with an easy start and such, probably 95%. I worked just like that. If you manage to find a device without an easy start, then I hope that it will be possible to install 40A for example and it will be 40A. And weld very fast! p.s. Really, I am not a professional welder. I don't have much experience. Before this, I only welded metal fence for the house (3 days)))) Good luck😉
Must be a labour of love, I thought I was bad. Taking out my wheel liners and descabbing my w203 rear arches. This is next level
Dnepropetrovsk
а что за желтая мастика? для чего она?
Dodgy that 😂
Everything is fine👌😀
Magnesium sacrificial anode to prevent rust so you do not have rust.
هل يمكنك ارسال النموذج والقياسات والتصميم❤❤❤❤❤
Imagine him with a HF 90 flux welder....lol he would be in heaven
Oh yeah😇👌
salem Thanks for this awesome antenna for the 1800 MHz frequency. I noticed while watching the video that the S parameter was 13.6. However, when you took the measurements with the slide rule , the S parameter was 10.3. The same goes for the second feed, where the S parameter was also 10.3. So, I'm wondering if the S parameter is 10.3 mm or 13.6 mm I need the answer because I made one based on S=13.6 thank you
Hi friend! Everything is correct, it should be 13.6 mm. On my slide rule 0 is not from the very beginning and that is why it seemed to you that there were 10.3 mm.
what the name of the yellow stuff ya put on the car
It's 2k epoxy primer
What county this?
I saw your video a few years ago, im a at home fixer myself, it doenst need to be perfect, i mean look at it, it worked 👍still a good job, and you can fix it up if it gets a little rusted again with not too many work, not so much work as you did before.
Thank you! I will try to release a similar video!)😉
Can i use food aluminium tin for it
I haven't tried it, but I think it should work
Nice work !! How much time did it take ?
I did this for 2 hours a day for about 8-10 days.
Nice work boy
Thank's😉👍
Aw3som3 work
Thank you for your feedback😉👍
A paint roller no way haha
😀😀😀
Nossa! Espetacular o serviço! 👏👏👏👏👏👏👏
What electrode did you use?
Hi! In this video I used 2.0 mm electrode, but I think that 1.6 mm would be better (I could not buy 1.6 mm)
what kind of cable did you use?
Hi! I used coaxical cable, 75 Ohm!
there will be a lot of women free they got no mate ...all gone to sleep
😢😢😢
А че, так можно было? Валиком навалил и сойдет
I'm Happy to see people like me ! repairing car with basic stuff :) Thank's for your video :)
Thank you for your feedback😉👍
Fantastic, what Rust Converter did you use? Cheers
I don't remember anymore my friend! The simplest converter that was sold in the store
What size of Threaded Bar you use 6 or 8?
8 mm
Да четко ты все сделал,подвалил,покрасил,продал!!! Благодаря твоим видео люди сами учатся ковырять свои машины! Спаниеле большое за ту информацию которую ты даёшь,а хейтеры и умники идут на…..
Parabéns pelo seu reparo, você fez um excelente trabalho meu amigo!
Obrigado👍
good day, how much will such a job cost?
I did this work for myself, so it's free😀
To boost ur upload u probably need to change the BAND in ur modem, stop using 4g pendrive, try tp link-mr 6400 v5.3 or tp link-mr 600, i think is the best buy
Can I use f connector on mr 600 without any converter?
Isolate the second element from the rest of all !
Did you get better results doing that?
@@davosam1968 before that I got -94dbm but after that I got -80dbm on my Huawei B310s 927 4g Lte Device.
@@adnan-usman-1 second element is the second biggest right
Did you cut the side panel from a donor car or it is actually sold like this?
It is actually sold😉
Hello. I want to know how many millimeters is the thickness of that metal? I need to know
Hi! The thickness is the same as a coffee jar😀😉
perfect. I prefer mig wealder
I support👍😉
Видео вдохновляет меня. Заставляет верить, что я не рукожоп.
It would be more authentic with dirt floor and flip flops. Edit: And stray dogs in background.
Funny😂👍
That doesn't looks easy. Respect to this man. 🤜🏻🤛🏻
Thank you, bro!👍😉🙏
Awesome work! What gauge metal are you using for the repair pieces?
Thank you for your feedback. I am very pleased)😉 In this video I used 2.0 mm welding rods, but I think that 1.6 mm would be better (I could not buy 1.6 mm) My advice is to use thicker metal standard. The standard panel was 1.1 mm. Those parts that had to be made again, I used 1.5-1.7 mm. The outer panel was less than 1 mm. Such metal is very difficult to weld. But I did it too and I think it’s good enough)
Un excelente trabajo de chapa y un desafortunado trabajo de pintura.
¡Gracias! Si, si... Así es😀😉👍
Не проще ли варить полуавтоматом, а про покраску валиком просто промолчу🤦
are you using 1.6mm welding rods?
Hi! In this video I used 2.0 mm welding rods, but I think that 1.6 mm would be better (I could not buy 1.6 mm) My advice is to use thicker metal standard. The standard panel was 1.1 mm. Those parts that had to be made again, I used 1.5-1.7 mm. The outer panel was less than 1 mm. Such metal is very difficult to weld. But I did it too and I think it’s good enough)😉
Это не реставрация ,это колхоз
Молодец, главное не боятся работы, ну и надо понимать что ты делаешь и как это сделать, конечно электродом варить это круто, но MIG , куда приятнее и быстрее, а так молодец !
👍😉
Great job👌
Thank's!🙏
😊 i would use 1.0 mm rods at 10 to 15 amps. I'm ready to do the same job on my jeep. I like a good challenge
Hi! Thank you for your feedback. I am very pleased) Really, I am not a professional welder. I don't have much experience. Before this, I only welded metal fencing for the house (3 days)))) In this video I used 2.0 mm welding rods, but I think that 1.6 mm would be better (I could not buy 1.6 mm) My advice is to use thicker metal standard. The standard panel was 1.1 mm. Those parts that had to be made again, I used 1.5-1.7 mm. The outer panel was less than 1 mm. Such metal is very difficult to weld. But I did it too and I think it’s good enough)