AIRBAG SPIRAL CABLE - REPAIR

In this video i repaired the airbag spiral cable from my car.
My car had a non-working horn and airbag error.
I did this repair a year and a half ago! Everything works!
Thank you for watching.
Please give me feedback which restorations would you like to see?

[@RestorationAustralia]

Interesting repair. 👍

[@tripled1600]

This is exactly what I needed thank you so fkin much ❤❤❤❤

[@svetoslavstefanov5744]

I had same problem, soldered wires and everything was ok for ....2 days :D. I think i screw the assembly part. People on videos make 3-4 turns per side, i count mine 15 per side, i mean i have around 30 full cycles from left to right - in half that is around 15, something is not ok with mine. I'm using com2000 DAV btw, a little different but i see the ribbon cables look identical.

[@lebecky_restoration]

Hi. You did something wrong. Everything has been working for about 2 years.

[@matthewwyers4342]

Would this repair fix anything with cruise control not working and average cost to buy/amount of time or have a shop do it?

[@lebecky_restoration]

Hi! If you have soldering skills you should try to fix it!

[@mattdikos]

Hello. Have the same problem. While replacing the indicator, the cable cracked. I want to replace the wire loop, can you help me, where should I order one? Or part number?

[@SynthGrooves]

Hi I cut the out side wire that connects to the AIRBAG while removing the steering can it be soldered?

[@lebecky_restoration]

Hi. If you connect the out side wire that you cut, will the horn work?

[@SynthGrooves]

@@lebecky_restoration the airbag wire is cut the horn is still working cause the right hand side wire is not damaged but even after soldering it, it still doesn't work
Now I bought a com2005 and will change it
The white wires(ribbon) measure resistance once cut and soldered doesn't measure same resistance and the fault remains

[@lebecky_restoration]

But I soldered these white wires (tape) . The horn and airbag have been working for about 2 years now. Maybe you have another problem?

[@SynthGrooves]

@@lebecky_restoration I see were you soldered it's not the same spot as mine , cut the small wire that goes to the airbag and after soldering didn't fix the fault maybe I have a faulty com 2005 but Im waiting for the part to replace it now

[@lebecky_restoration]

Change com 2005 and look for another reason. Perhaps you have a problem not in the wire?!

[@Kennerdoll]

my horn works but the airbag light is on, whats your say?

[@lebecky_restoration]

Maybe your car was damaged and there are no airbags? Please check if they are available and if the wires are connected to them.

[@anilkashyap6821]

Bahr kese kharide online milti hy kya bhaiya

[@lebecky_restoration]

I took it apart outside the garage and restored it at home