How to Replace a Clock Spring (airbag light & horn not working)
HTML-код
- Опубликовано: 9 ноя 2019
- Learn how to turn off your airbag light and fix a horn that doesn't work by replacing your clock spring. Replacing a clock spring is very simple, saves us over $600 and takes less than an hour. I will show you how to safely remove the airbag and steering wheel so you can replace the clockspring at home using common hand tools.
To figure out I had a bad clock spring, I used an obd2 scanner to scan the airbag light and got codes b1801 and b1811 which is an open squib circuit, which means the clock spring is bad. Another way to tell the clock spring is bad is the horn doesn't work and/or the steering wheel buttons don't work.
OBD2 Scanner (BlueDriver): amzn.to/2q5sC1Z
Service Manual for Torque Specs: haynes.com/en-us/
Steering wheel puller: amzn.to/2NUbofS
Torque Wrench: amzn.to/33B3dvA
Ratchet: amzn.to/2NzwZLt
Threadlocker: amzn.to/2p7qKW3
Clock spring: amzn.to/2p53acj
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber: ruclips.net/user/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. Авто/Мото
Chris: It's so easy you can do it in under an hour!
Me, 10 hours later: Sobbing and cursing in front of a pile of random parts.
Lol but true
This job is so so easy that I bet you can do it in an hour!
I'm still trying to master changing my blinker fluid and piston return springs.
Lmao
@@chrisfix What do we win if you are wrong? :)
I went to tighten my power steering belt on Saturday.
I broke the pump!
"the nut and the shaft are aligned"
-chrisfix 2019
LOL. You need to grow up a little, and so do I 😂😂😂.
Dammit why am I chuckling at this 😆
R/cursedcomments
its nNN
@@tylermatthews4251 we all need to grow up
Ok this is the way you make a how to video. Easy to follow, no loud music, good lighting good camera angles, good sound to the point. Very professional. Thank you for your time and knowledge.
Exactly 💯
You made this 4 years ago, but it's going to help me now as I need to replace the clock spring in my 2011 Sonata. I don't want to pay over $1300 for someone to do it for me. Great channel and help!
"It won't blow up, you'll be fine"
- ChrisFix 2019
famous last words
I mean I have a lot of experience with airbags so you can call me an expert :P ruclips.net/video/fgLfhInA6-c/видео.html
@@chrisfix Sure ;P
I blew my whole car up! think I used too much dynamite
Takata said the same thing hahaha
No one:
Chris’s Neighbours: “Well, he’s talking to his car again.”
HAHAHAHAHAH
chris' neighbors:
chris: hey guys chrisfix here
More like "someone else's car again" but LOL.
missak kechichian p
I almost spit out my milk when I saw this, got me cracking
I worked as a car parts counter man before airbags on a car was even a thing. I had never heard of a clock spring on anything but a clock. This video was exactly what I needed. Without this video I wouldn't have ever attempted this repair.
I'm glad you learned about what this was and got your car fixed!
Hey Chris Fix. May 28, 2024. My cruise control quit working, I replaced the switch and the clock spring per your video and it works perfectly on my 14 yr old 294,000 mile Toyota Tacoma. The dealer I bought it from wanted $1300.00 parts/ labor and 1/2 a day to fix it. With your video and approximately $50.00 parts and 1 hour of my time- DONE ! Thanks a million.
Dude I can’t believe my clock spring went out and you just came out with this video lol
Same here!
That same thing happened to me right before his leaf spring replacement video! Lol
My ChrisFix senses were tingling!
Yeah. That same thing happened to me and I was able to replace the blinker fluid
@@GoogleUser-jt5mu 😂😂😂
I'm a simple man
I see a chrisfix video, I press like
Thanks for the support!
Hamza Iyaad lol
Same!!!
And then watch the video
Chris is probably the only RUclipsr that actually reads through his conments
4 hours everyday reading and responding to comments!
Project Farm reads all of his too.
Any dealership: it’s going to be 650$ just to replace your clock spring.
ChrisFix: I am about to end this whole mans career I can save A TON of money
lol
True
lol
Lol
Times up! We are entering the time of honesty so “NO MORE CHEATIN’ PEOPLE” got tired of that long ago now I try to fix my own cars. And Thanks to people like you @chrisfix
I love when something new breaks on one of chrisfix's cars.
Same here
I'm glad someone does haha
@@chrisfix I have a 2000 ford f150 xl and parking brake light and abs light is on even when the parking brake is not on do you have any tips to troubleshoot it?
@@jasonjr2500 Wheel speed sensor?
@jr a simple googling will get your answer.. But generally there's a sensor attached to the hand or foot brake for this that will probably be dirty... These don't really break.
me: has no interest whatsoever in replacing a clock spring
also me: watches entire video
Same
Glad you enjoyed the video and hopefully learned something new!
@@chrisfix i did i made ur hummer in forza horizon 4 but the vid is bad 😞
IKR
I just did the exact same thing 😂 they’re so addictive to watch
I just finished replacing the clock spring on my 2011 highlander, these instructions made it easier than I ever could have imagined... much appreciated Chris 🙂
I’m hoping to replace mine on my 2010 Matrix today. Were the screws in yours pretty close to this video?
I would have never attempted this if not for your video. I watched it 3 times to fully comprehend the process and the tools needed. Everything went as you described and my issue was rectified. Thank you for taking the time to share this knowledge.
Nice work! Glad the video was helpful!
chris fix: torque spec is very important!
me with my snap on air gun: RATTATATTTATATA, ok its tight
Firealarm102 👌
Yep, this is me!
Is it 5 or 6 ugga duggas?
I use my electric - it's more powerful.
Hahaha,its never enough just need one last torque manualy by hand
Chris be like: “Today we will work on something simple! We will rebuild a transmission!”
Me: I can barely change my wiper blades.
TBH learning about how transmissions work is super confusing. I have 16 headaches thinking about it so far
Chris uses Google. You should too.
Bulking Cat he isn’t, car maintenance is surprisingly easy on most cars.
Funtagious oh well that’s bad news for me I’m putting a new trans in my truck.
I know right
Hey Chris, I just replaced my clock on a 2005 Prius. By the use of your video you created. I've done a lot of training in the past and I just want to praise to and thank you for a stellar job on the presentation. you were extremely thorough in the details and explanation of why, what, & how.. EXCELLENT JOB & WELL DONE!!!!. I couldn't be more happier with the outcome of fixing my car mainly because of YOU!! Thanks Chris
I did it. Took 45 minutes....thanks for your videos!
Yesss !!! I miss the how too!! Keep it up can’t wait to see you post more
Wooooo
@@chrisfix 10k in 9 minutes.... nice
No one:
Chrisfix : builds entire car
Chrisfix: it's not that hard
noting is impossible if you are a hard worker like chris.
@YFNSP and gloves.
@YFNSP Don't forget the eyes-protection ! or even a mask in case you DIY even your paint job !
it's very simple you can do it at home
@@antonbarkish5924 .. on your driveway, with commons handtools !!
Thank you for the video on clockspring replacement. My horn stopped working and my car wouldnt pass inspection. Looked at other videos and yours stood out for 2 many reasons. You saved me money and stress. ✌
Did it end up being the clock spring for the horn issue? Mine is doing the same thing
I need you in my life Chris ☺️you sound just like a man that knows what he’s talking about thank you very much I believe I can do this myself after watching you
Nobody:
Chris: MEDIUM STRENGTH THREADLOCKER
Chris: "OEM or Aftermarket, it's up to you"
*Proceeds to make an excellent point on why aftermarket part is better*
I avoid aftermarket parts as a rule - too many _really_ bad experiences - but in this case I agree with Chris. The high failure rate on the OEM one is enough to get our attention, and the ease of replacement, low impact if it does fail, and the enormous price difference make it attractive indeed.
@@flagmichael Not only that, but aftermarket parts can be of the same or higher quality. Brands like MEYLE might not have made part X as the OEM manufacturer for car Y. But that does not mean it isn't OEM quality.
@@Swordie100 Not hardly, OEM parts get upgraded to fix whatevee issues too. OEM fit and function is always better than knockoff parts from discount part stores.
@@jdigitalseven7 OEM parts get upgraded to fix issues? This video is literally living proof that this is not always the case..
Notice how I said aftermarket, not knockoff parts or discount store. A lot of manufacturers are better than some manufacturers that are OEM part suppliers. Meyle/Mahle etc are some of them.
@@jdigitalseven7 what??? I think the best proof that's not entirely true is bulletproof diesel parts for mid 2000s ford f250s. They fixed the EGR issue every single truck had and they're all aftermarket. I know it's not "knock off" but it sure isnt OEM. Its better.
Chris: *calls dealership for quote
Dealership: *sweats nervously
My dad's been working at a parts store for 12 years or so. My daughter had a 2007 Dodge Caliber given to her and I wanted to fix her cruise control, so I bought a cruise control switch and replaced it. When that didn't fix it, I learned that along with the cruise, the horn didn't work and the airbag light was on. I had already watched this video once, but found it again and the rest is history. Fixed all those problems for $26 and had no problems whatsoever. Saved me a ton.
Video Idea: Do a super clean interior video on your family's cars
I feel like this guy is related to you lol
done already years ago. on sister's fiesta
Hey guys! ChrisFix here!...
Problems with the cup holders in your car?
Alright, the first thing we are going to do, is disconnect the battery.
lol
@KelMaster Construction I've replaced hundreds of airbags for the Takata recall and have never disconnected the battery. Dealer techs wont do that because we are on flat rate and time is money. Plus customers get upset if they loose their stations lol. If you're doing it at home I recommend it though. We did have one tech turn an airbag ECU upside down with the ignition on and it tripped the rollover sensor which deployed all the airbags. Always take the key out of the ignition at least
As long you use medium strenght threadlocker - you'll be fine :D
And get some soapy water
😂😂
14:09 is why I am here! Replaced my Clock spring and missed up the Calibration and my back up Camera is angled to the left and my VDC light is on! Thank you for helping me calibrate it!
Before I start watching your videos I didn't even know how to changed tires but now I am the family mechanic thanks Chris for everything you are a Godsend
Absolutely LOVE Chris's voice and energy.
Thanks!
Its been long since i heard that “hey guys chrisfix here”
Edit: wtf i just said i miss him and i get 700 likes? Thx guys!
@Hell's favorite NPC #69OU812 . exe There aren't unlimited amount of parts in the car. No wonder why
@Hell's favorite NPC #69OU812 . exe hoping he can do one on changing a passenger seat occupancy sensor. It's slightly different on every car though so I'd feel like that would be a lot of work
''Just like sooo!" 😃
Same
@Hell's favorite NPC #69OU812 . exe nah he has alot of ideas he's just taking his time to make the video
Chris is the types of dad that won't get angry when he repairing his car with his son :')
He be like “Hey Son, Daddy Here”
I’m sorry to say cookies n cream but. Yelling makes u remember what to do
"HOLD THE GODDAMN FLASHLIGHT RIGHT"
@@whosdnc LMAO
@@whosdnc 😂😂😂
Thank you for your this video brother. I've been watching your vidoes for over 5 years.. Never needed them until this went out in my wifes vehicle. Saved over 1k from going to the stealer ship.
*No soapy wooder were involved during the making of this video*
Lol
Everyone: we want a Honda delsol video
Chrisfix: PRIUS
You will get the Del Sol video but it is not simple to film so stay tuned!
He put in the piston return springs and they take couple of months to heat up so you don t damage the piston :))
I like how happy he is at the end when he is done with his projects, he has a lot of confidence
Chris, yours is the only Prius Gen 2 clockspring replacement video on RUclips that deals with the Steering Angle Sensor. Kudos! There's a reason you have 10 million subscribers. :)
The clock spring on my Tacoma has been bad for about a year now and I’ve been waiting for you to do a video on them so now I know how to replace it...THANK YOU!
Now you know exactly what to do!
Hey some Tacoma's have a recall to where Toyota will replace it for free. Please check with your dealer first
it isn't that hard. You just get your common handtools, soapy wooder, medium strength treadlocker and that boi will fix itself
But you have to remember the gloves eye protection and dustmask
Did you do it Mr,Sandrowski? How did it go did it take you about an hour?
Chris is a mind reader!
About to do suspension on my jeep and he uploaded his suspension video while I was doing it,
Then my miata needs a new clock spring and the day before he uploads this!
My ChrisFix senses were tingling.
@@chrisfix lol now only if you came and did it for me
Mike Smutz Wack dude, Chris explain
Chris is breaking your car for views.
Why do you have 2 awful cars
Chris is the type of dad or older brother every techy wish they had, I had to learn on my own and was blessed with engineers for uncle's and a natural curiosity and determination of how things work, why they work, why it broke, how to fix it, what to do and not to do next time, and how to make it last longer.
Chris, thanks for your clear guidance on how to proceed safely and do the clock spring in my driveway; saved me hundreds of dollars. This is a job any careful, sober auto mechanic can do without much difficulty. Hardest part for me was overcoming stripped threads on the steering wheel (someone had already been there before me . . .) I used 2 other gear pullers until I got the steering wheel started off the splines. You make GREAT videos--please keep it up. When I need to do something I have never done, I always check to see if you have a video (even if it is NOT my car). I have a 1996 Chrysler Town and Country; by late 2023, I have replaced about 95% of ALL the parts in this van--249K miles and going strong. Thanks to videos and other mechanics who have taught me all I needed to know.
I wanted to say thank you, but that doesn’t even begin to cover how grateful we are to you. You have saved my husband & I hundreds & hundreds of dollars with your fix it videos. We’ve been able to replace a pulley, serpentine belt, brakes, rotors, upper control arms & we just today replaced a tie rod...all on our own....just from watching your videos. Thank you!!!!
It's nice not to have to worry about being ripped of at the dealer aye? If you truly wanted to you could replace the engine in your car by watching quality how to videos.
Ohhh yeah it’s that time of the week now
Yessssss
Fabulous vid, pal. I'm 63 and was a mechanic back when we used dinosaurs to pull us around. Last time I pulled a steering wheel, it was unimaginable to not have a wheel puller. Plus, it was daunting to pull an airbag. Didn't wanna kill myself. Think I'll save myself about $450 and rockauto the clockspring and do this my own damn self. Thank you, sir.
I just used this video to replace the clock spring on our 2011 Toyota Sienna. Same process where it counts. The Toyota dealer quoted me $921! I bought an after market clock spring for $91. Did it myself for a tenth of the cost the dealer quoted me, saving over $800! Thank you, ChrisFix! You're the best!
I love the sight of a Prius and a Humvee in the same driveway.
ChrisFix: How to change the clockspring in your car!
Me: checks to make sure it's not April first
livefromhollywood194 Hahaha yeah for some reason it does sound like a made up part.
haha it does sound fake but it is actually 100% real!
Hey Chris I tell my dad what to do and he knows now
This is wholesome
🎮
Jimmy Productions true
Wholesome 😍
(told)
Another awesome "How To" video, Chris. I struggled a bit with the disassembly of all the snap-fit parts, and some of the stubborn connectors, but you gave us just enough info, in a very efficient manner, to git-r done. Many Thanks.
Let's be real, we all know why Chris hasn't been posting much lately.
He's been driving his Hummer 24/7 for two months
Leinad this video is old, look at the mustang’s steering wheel its worn out even though he’s refurbished it earlier this year
Leinad bruh this video is actually 2 years old
@@anyone5278 This video is new. He just re-used the clip from the Mustang when he refurbished the steering wheel and edited it into this video.
I wonder if there will be any videos of breaking nuts loose (if you know what I mean NNN)
He put a video 3weeks ago nobody knows
Clicked this so fast, thank you for the quality content as always!
If only all automotive guides had the filming quality that this channel does.
Thank you Chris; my garage just tried to scam me for 750 euros (in Germany) for parts and labor---your sharing of knowledge and know-how has made my month--thank you so much! !
Replaced the clock spring in our 2012 Toyota 4Runner. This is the best video out there explaining the process without being too complicated. You highlighted everything we need to do this safely and efficiently. Saved $600 even with an OEM clock spring from Partsouq. Thanks!
DUDE FINALLY I MISSED UR VIDEOS I WATCHED THEM ALLLLL
also I love cars too this is why ur one of my favorite RUclipsrs keep up the great work chris
I genuinely thought a “Clock spring” was an April Fools video.
like the piston return springs video, lol
techforever1970 same
That looks uncannily like a weed eater spool with random connectors attached to it. Thanks for the lesson Chris! Learn something new everyday! 😆👍🏼👍🏼
Same here
And here I am still trying to master changing the blinker fluid.
I had an airbag light on in my 2008 Toyota Tacoma and after checking it with the bluedriver, I found out it was the clock spring. Following this video made it so easy to swap it out, Thanks as always Chris!
My dad found this soo useful, thank you!
Dear Chris fix i’ve been watching your videos for a few weeks now and you’ve taught me a lot about cars how they work and you’ve got me deeply interested in cars also I think you’re very generous for doubling the money to Saint Jude with your own cash 💵 my dad used to be a mechanic and he still works on his own cars,because of your videos I was able to gain a deeper understanding of cars and now I can have Conversations with my dad about cars and stuff. Thank you Chris 🙂 you’re a great content creator and a great person keep it up.
Ps. The Mustang is so cool and I hope to see it rolling down the highway one day.
Awesome! Thanks a lot!
Thank you for responding it really means a lot
Ain't nothing wrong with my car 😂 I'm just here to learn!
Awesome
Voltrons same
I don’t even own a car
Alvar Broing same lol but i still want to learn
We just watch to learn if it ever happens to a friend.
I watched a few Toyota clock spring replacement videos before this, but only after watching your video did it seem so much simpler than the others. Never thought I’d need to do this myself but thanks for the helpful video ChrisFix!
Thank you so much for this informative video, it was kinda amazing how many things it fixed at once. It fixed just about every button on my steering wheel, and also the airbag light. I paid $10.00 plus shipping for a brand new same exact part as a factory clock spring, it even came with a 1 year warranty!! Total savings was well north of $500 from the dealer price parts and labor. Had to buy a couple tools, total cost was about $33.00 tools and parts. An absolutely amazing savings, and was easy due to your comprehensive information. Thanks a million Chris!! My car is a 2008 Toyota Prius, Gen 2.
That's what I love to hear! Thanks a lot!
Really? No one?
"A car's weakest part is the nut holding the steering wheel."
zxxxxtusudjgdjhd
Grggfhhugfhdgshzhhshsbsb
@@rajunoor are you having a stroke?
"we don't have any lights on the dash"
seatbelt and tpms lights: am I a joke to you?
It is a shame because new tires were put on that thing right before I filmed it and the tech didnt address the tire pressure light.
@@chrisfix you should also mention to delete the error codes from the obd2 memory in case you'll go to the mechanic next time and he reads them, he wont get a false positive.
ChrisFix that blinking light means you have a bad sensor somewhere. Some like Honda have two tpms lights to tell you when a sensor is bad.
ChrisFix I work for Toyota try to set the tire pressure to 36 psi and look under the dash or in the glovebox for the reset button
Brilliant video. I’ve not done more than basic car maintenance before and I did this in an hour. I drive a 20 year old imported Toyota Alphard and was struggling to find a garage the could diagnose & fix the problem. Managed it myself for the cost of the part. Thanks Chris!
It’s been a while since I’ve heard that “Hey guys, ChrisFix here!!”
You can hear it every day on instagram with my daily updates! instagram.com/chrisfixit
These DIY videos take over 120hrs to make so...
Chris not saying there is anything wrong with it but why do you try to hide your face although there is plenty of videos showing your face (generally curios)
ChrisFix haha sure will!!
Me too
I didn't even know there's a part called clock spring
I watched your video and proceeded to order the clock spring and installed myself based on your video! It works!!! OMG!
Save nearly $200+ as the local car workshop quoted me $250+ for parts and replacement. Did it in less than 1hr like you suggested.
Hello from 🇸🇬 Singapore.
Nice work and glad the video was helpful!
Love how informed this man is when his breaking down all the components dealing with removing and replacing anything his working on. Be nice if he did the same for a jeep.
"HAY GUIZ!" - It wouldn't be a Chris Fix video without it.
DUDE CHRIS I've been having this exact issue in my 2010 Hyundai Elantra ever since I got it and the dealership wanted $150 just to diagnose it! You just showed me the problem with a free video on RUclips and how to fix it! You're awesome, thank you!
Awesome! Now you know exactly what to do!
Thank you so much Chris ! i got a $17 clock spring off ebay and replaced it yesterday following your awesome guide. had to buy the 19mil socket, torque wrench and the weird multi screw driver :) for another $15 ... took less than an hour event though i went slow taking pics at each step as a precaution. My cruise and info button were not working before and now all back in action. you saved me $145 bro. you are the best !
This is the exact problem my truck has. I just took it into the dealership because it wasn’t quite lining up in the park position. And felt like it wasn’t going to go into park . This problem was fixed a year and a half ago by adjusting the shifter cable. I figured it would be another adjustment of the shifter cable. However they said there’s no problem. They’ve cleaned it up and slight adjustment and charge $95. I left the dealership and discovered my reverse and drive her right out of alignment now as well as my park. Your video is the exact problem I have which I think I will email to the dealership service department. Thank you so much!
When he said “anything you need will be in the description” I immediately though I need a car to fix. I’ll look in the description.
Never clicked so fast! Your videos are always amazing!
Notification squad here?
Represent!
Reporting in!
Coming here to tell you I just used this video to change the clock spring on my 2012 Malibu! Slightly different setup but a perfect understanding of how the part works. Thank you for all your great content!
I'm glad the video helped you with your Malibu!
Chris, if you see this, I have a big ratchet set and sometime this year (as of 2020) I will try to strip a cheap car for money, it’s all because of how you know all this and have taught me, keep doing what your doing!
Chris's father: walks in and salutes everyone: "Hey Guys!" and immediately turns to his son and say: "Chris, fix here!"
Bet he's very proud of his son.
And so he should
Hey Chris! It also helps to leave the nut on when removing the steering wheel. When you’re pulling hard on the steering wheel, it will prevent the wheel from hitting you in the face. 😁
Haha def! Luckily this wheel came right off
😂
I actually watched all of your videos a while ago and when my horn stopped working and heard a lot of snapping of wires when turning the steering wheel I new exactly what it was. Thanks for what you do.
Dude your videos are always the best, with clear direction and all possible questions answered! Thank you, your vids have helped me through so many projects. Your the best and thank you for all the time and effort you put into these videos, I know it’s a lot.
Nobody:
ChrisFix: soapy wooder.... medium strength threadlocker...................good!
When u supercharging the driftstang. Love the vids
@Showsy noticed the driftstang still had stock seats, no e brake, and steering wheel wasn't re wrapped yet?
He obviously used old footage from the steering wheel wrapping video, he didn't record that while making this vid.
zioxei exactly lmfaoo
@@garlicbreadjenkins5780 he prerecords all his videos because he only has good weather in the summer and spreads them throughout the year
I like how old this new video is :look at steering wheel on dridtstang
Thanks Chris, your videos are helping bring my pathfinder back to life!!
Did you have to get the clock spring calibrated at the Nissan dealership, I saw a video of clock spring replacement and the guy said it had to be calibrated at the dealership thanks in advance
Just replaced the clock spring on my Prius myself with a genuine Toyota clock spring for $35!!! Big savings and this video made it extremely easy thanks Chris!!!
I love this video but right now im waiting for the turbo video for the del sol
Anyways
Great video chris!
I remember my automotive teacher teaching this when I was attending college. We had an hour powerpoint presentation and did hands on training on it. I think the group and I were changing it out from a '04 Toyota camry (shop car) and that bolt was so rusted that we couldn't get the steering wheel out. I never knew it was that easy and the steps you did on this video is spot on.
Thanks Cris 👍
you’re the best and I still watching you vídeos in 2023 ✌️
By far the best DIY video I’ve seen in years. I replaced it on my 2011 Avalon and you were spot on. Thank you so much! BTW, I purchased my clockspring on eBay for $20.00. Awesome!
It's always nice seeing a new Chris fix. It's been way too long.
the nut and the shaft are aligned
chrisfix 2019
This is important on many levels!
What. I got a reply frm chris fix.
Mum
Come see this
My rollmodel.
Thanxs.
Umm dude when does he say this I couldn’t find it?
If your nut and shaft are aligned you may have some kinda problem 🧐
I just want to thank you so much for the very articulate and well explained manner in which I needed to replace my clock spring on my 2009 kluger!! You guided me through a very successful process and now my steering and horn work perfectly!! 10/10
Chris Fix: "You can change it yourself and it shouldn't take more than an hour"
Also Chris Fix: *makes a video demonstrating how to do the job along with a full explanation in less than half an hour*
Skill level: over 9000!!
"Hey guys, ChrisFix here!" is something i always waited whenever u don't post a video, finally it's here
"The clock spring connects all the electronics of the steering wheel" me glancing over my car that doesn't even have the horn built into the wheel *seems like I'll be saving a lot of money* !
LOL
Really helpful!
Used your advice on a gen 3 2010 Prius UK model, a few less screws and more plastic clips. The whole cost was £24.99(price of the after market clock spring). Just had to be cautious and mark the postitions of whatever I've removed.
Big thank you!
Hey Chris, Just wanted to leave a post thanking you for this video. Yesterday I was able to follow this & change the clock spring in my 2003 Toyota Corolla as well as your headlight restoration video. My car just passed its safety inspection and is back on the road thanks to you.
For a moment there i was wondering if it's April first, then i remembered that there is indeed a clockspring in a car. :))