Dylan; that bed is absolutely savable, if you were to take a piece of angle iron about 2 feet long bend into the shape of a speed square and weld it together you can fix all four of the corners. Of course you'll have to make 4 of them. I did that to the bed of my '87 W-150 works like a charm.
Would love to see this as a long term project. Get the window and wiring fixed so it starts as it should. Then start on the bed fixing the metal so as to use an or style wood bed kit. Then upgrade the ignition and do the rust repair as you did on the challenger keeping the patina 59:31 . Would make an interesting series
Yeah mine is a magnum V8 2000 dodge ram it had a unmolested wiring harness under the hood and the freaking ground squirrel chewed a few things off of it one being the injector cylinder 7 connector wiring pigtail and it still runs fairly decent on 7 cylinders don't idle well and then it drinks gas even more because of it but the harness where no 7 injector connector pigtail is spliced in the factory wiring harness is back behind the brake booster, and the freaking ground squirrel left me a 1/16th of an inch of wiring sticking out so I'll have to tear down the key and unhook the fuel rails to get back to the wiring harness to dig the wiring out and splice no 7 cylinder injector connector pigtail and freaking ground squirrel stalled my truck for 2 years and me trying to figure out why it wouldn't start other than maybe the electrical ignition switch around the ignition key cylinder on second gen dodge ram trucks replaced it with a brand new standard motor products 1998 new in box part and just went ahead and installed it and put the factory one in the box,, and the map sensor is what I thought was wrong,, it shared the same ground as the tps,map,injectors, fuel pressure regulator and crank shaft sensor, and the last one actually ended up being my problem, the signal wire on the crankshaft position sensor and the chewed ground wire having bare spots thanks to the freaking ground squirrel is why it didn't run fixed that fired right up unfortunately after sitting 3 years pretty much not used it's going to need a heater core and I definitely do not want to move the dash at all to change it so im thinking after winter im just going to back flush it with the water hose in the top inlet hose of the heater core and out the bottom outlet hose of the heater core and maybe even do it the other way around as well...., anyway not a bad running truck for 210k miles
For about 20 years, I had a 1969 D200, 318, auto, 411 gears. The Dodge had a Ford high side step side bed, from previous use as a county truck. Had one ton rear axle and HD springs, etc. This truck lived the second half in the mountains for local use. Regularly, I would shut it down when the snow fell and not get started again until the spring. Charge the battery, pump it a few times and she would always come to life for another season. For the1969 D200 next life, I sold it to a getlman who was gooing to restore it. Onward!
Wow, the transformation from good old Rump was fantastic It was highly satisfying. It looked like you were "painting" Rump orange. Just a side note that Valley is not going to be much help until she is older and knows enough what to do. But still, it's very cute to see your daughter helping out.❤
Last time you drove it was 2019, I was a junior in high school, i then met my girlfriend who is now my fiance. I loved the original video on this truck, time really does fly!
It's amazing how well the paint came back. It looks great. I also thought the panels were rusty. Maybe you could just put some shine juice on it instead of buffing it out.
Yes i love the old stepside bed on this truck and it is i think a 72 that is why it's a cab mount in cab gas tank,,i had a 74 but I was a club cab short bed so it's gas tank would already be under the bed, but I'm thinking tin grille dodge trucks that 72 was the last year of the in cab behind the seat gas tank
Great video as always! love the truck, I think I have a driver's side door glass you can have if you need it.. I'm in Oneida Tn. I'll check for sure when I get to the house shortly. keep up the good work!
Dylan, make Rump your shop truck and drive it to get parts and local revivals. It looks and sounds way to good to leave it sit. fix that window and add a floor to that bed so its usable in and around town. Save the miles on your newer / every day vehicles and drive something McCool in the process.
I had a 73 fleetside with the 400 bb in it. While visiting a friend in Nebraska, I found an old 361 cid big block with 4bbl carb, took the heads and intake off of it and did a valve job and Carb rebuild and installed them on the 400 motor. I got 19 MPG with that 400 BB!!!
Congrats on everything Dylan. The little "helper", the inolved family, the truck coming back to life and doing the thing. And also for having one of the best looking trucks at the show, it is definitely super McCool. Can't wait to see what you make of this one.
I had a 1980 dodge d-100 step side that my dad restored when I was a kid. Went from a slant six 3spd to a 318 straight motor no emissions and a 727 TF. Sea foam green. It sat for a while and my mom sold it out from under me. Man the stories I have in that truck. I’d give anything to see it again.
Some really nice vehicles at the car show, glad you went and filmed it. Interesting side note very few churches have carparks here in Australia and haven't heard of any churches that have carparks, allowing car shows.
I used LMC on my 66 C-10 shortbed stepside had great sevice only thing i didn't like was i ordered a new sending unit after i cleaned out the gas tank and the unit didn't have a sock on the pickup tube nor was it flared so you could fashion one to it . Had to run a double fuel filter on that truck Also uded them on my 78 Big 10 for a few parts and the 85 Silverado a built for my nephew ! Good company great customer service !
Have a 318 in my wifes 70 belvedere 2 door. 15 yrs ago i tore the body apart and did a restoration and color change. The motor was still running good but i rebuilt it anyway to get about 50hp over stock. Weve owned this csr for almost 30yrs.
I had 318 in my 79 Dodge Power Wagon and bought it back in 1997 fixed it up then a year later got it restored and took it to Carlisle All Mopar Show and came in first place truck division in 2004 with some original part and chrome wheels
@@vernonbolinger9488 very cool! My car has been in the family since 1988 and my grandpa bought it then and my dad has had it and he gave ot back to my grandpa and now I own it. I recently bought a 383 with a 727 to eventually swap out. It was my first car and drove it in high school and now I’m slowly but surely restoring it.
@@michaelgorman4229 I like power wagons! My dad had a 1980 power wagon with a 360 in it with a lift and it looked mean! I took my 69 satellite to Mopar nationals in Shreveport Louisiana and got first in the work in progress class after I got it running
That's a big church, most of our rural churches in Australia would only be about a tenth of the size of the church in the video. But very few of us go to church these days, so a lot of churches closing down and being converted into houses.
Thank you for the great video, I fell transferring to my wheelchair this morning and your video was just what I needed to take my mind off of the pain Thank you and God Bless 😎😎
Really like the look the ole rig. I just pulled an 83 out of the woods. It’s got a weird motor setup, originally a slant 6 truck, but has a 360 with a 340 intake, shorty headers, and idk what else. Hope to get it running hear soon! Love these old Dodges
I've loved this truck since you found it in the junk yard. I'm glad you still have it. It's such a cool truck! I'm glad to see you are getting back on the road.
So sad we missed you at the car show! Im bringing my younger brother with me this year to MOPARTY. We drove the Shadow, Saturday to Huntsville before coming to Elora. The car did excellent, despite the shorts in the dashboard! Oil light comes on when idling, temperature gauge hung out to the right. Plenty of oil and antifreeze though! Plus she still does 75+ on the interstate! Proud of this little convertible. We will have to bring Charger to Bowling Green though, need trunk space and protection from weather.
Thank you for sharing a Bible verse each video. Many times I get down or depressed and the reminder that the verse brings me helps me to go on and pull through. Love your channels and your vehicles as well. May God continue to bless you and your family mightily. ❤❤
@@alwynemcintyre2184 If you had no interest,then why did you comment? You must be one of those people who thinks that everyone should be as miserable as you are... Thanks for letting your real inner self out for all to see on the internet. I will pray for you, and there is absolutely nothing you can do about that. 🙂♥️
What a cute little daughter you have. She was watching your every move. We enjoyed seeing her on the channel! Oh ,and cool truck also! The color Might be a metallic orange. Mopar had a metallic orange back then called Vitamin C! The Lord bless you and the family!
I am sitting here in tears right now😭 I learned to drive in a orange Dodge stepside just like that my granddaddy had one that he bought from the construction site that he worked for and that's the first truck I ever driven I always wanted to find one Dylan I wish I had the money to try to buy it from you I would great find buddy great find😔
I looked and saw 43 minutes ago and a 59 minute video, and thought, nobody should have commented yet, and first comment I see is “why is there so many bots” anyways I was going to finish junkyard digs most recent video, but now I’m gonna watch this right after, love your vids Dylan.
This was my first video i ever watched of yours been here ever sents old rump love it and you have a beautiful little girl im a dad of 1 girl also congratulations
A new set of wheels and tires and she'll probably stop the shaky shake. Or maybe it just seemed like it was doing that. Nope it was doin that LOL. Love the car trucks and the channel!! Thank you! Oh and the Baby!! She's a sweetie! But what baby isn't??
Hi Dylan and Brier and Rump nice video 📹 and workmanship the trucks cool 😎!!! Is that a Dukes of hazzard color !!! Was that TOP CAT PETTY PULLING IT OUT OF THE SPOT LOL
I'd like to see this truck get some real love starting with fuel injection. A few body and bed mounts might be nice but new bushings all around is a must. Put some suspension in there and she's a daily driver.
What a great truck , I can’t recall if you have a dedicated “shop” truck and if you don’t I feel this ol’ girl would be up to the task Dylan . The orange and black scheme works well together. Cheers 🇨🇦
Long overdue for Rump! Get a door glass asap. My 72 gad thise same junkie after market mirrors at the same weird angle. Agree with the old barn wood fir the bed. Hope to see a lot more of Rump
Dylan; that bed is absolutely savable, if you were to take a piece of angle iron about 2 feet long bend into the shape of a speed square and weld it together you can fix all four of the corners. Of course you'll have to make 4 of them. I did that to the bed of my '87 W-150 works like a charm.
the original video on this truck was the first video I ever watched on this channel. Glad to see it again
RUMPY PUMPY please keep her driving, I loved the first videos. Thank you for coming back to her she deserves it
Looks like you have a new permanent helper for the channel ❤
You should get some Reclaimed barn wood siding for the bed floor that would give it a cool look to go with the rest of the truck.
Would love to see this as a long term project. Get the window and wiring fixed so it starts as it should. Then start on the bed fixing the metal so as to use an or style wood bed kit. Then upgrade the ignition and do the rust repair as you did on the challenger keeping the patina 59:31 . Would make an interesting series
The old bird bath hood. Unique to dodge trucks of the era.
A lot of that generation dodge truck design was inspired by the roadrunner/satellite of the same era.
Hopefully you do more than this and go through the truck it deserves it, Cool homemade shifter and your Daughter is Absolutely Adorable.
Sounds awesome the 318 is the best engine dodge ever mad
Yeah mine is a magnum V8 2000 dodge ram it had a unmolested wiring harness under the hood and the freaking ground squirrel chewed a few things off of it one being the injector cylinder 7 connector wiring pigtail and it still runs fairly decent on 7 cylinders don't idle well and then it drinks gas even more because of it but the harness where no 7 injector connector pigtail is spliced in the factory wiring harness is back behind the brake booster, and the freaking ground squirrel left me a 1/16th of an inch of wiring sticking out so I'll have to tear down the key and unhook the fuel rails to get back to the wiring harness to dig the wiring out and splice no 7 cylinder injector connector pigtail and freaking ground squirrel stalled my truck for 2 years and me trying to figure out why it wouldn't start other than maybe the electrical ignition switch around the ignition key cylinder on second gen dodge ram trucks replaced it with a brand new standard motor products 1998 new in box part and just went ahead and installed it and put the factory one in the box,, and the map sensor is what I thought was wrong,, it shared the same ground as the tps,map,injectors, fuel pressure regulator and crank shaft sensor, and the last one actually ended up being my problem, the signal wire on the crankshaft position sensor and the chewed ground wire having bare spots thanks to the freaking ground squirrel is why it didn't run fixed that fired right up unfortunately after sitting 3 years pretty much not used it's going to need a heater core and I definitely do not want to move the dash at all to change it so im thinking after winter im just going to back flush it with the water hose in the top inlet hose of the heater core and out the bottom outlet hose of the heater core and maybe even do it the other way around as well...., anyway not a bad running truck for 210k miles
For about 20 years, I had a 1969 D200, 318, auto, 411 gears. The Dodge had a Ford high side step side bed, from previous use as a county truck. Had one ton rear axle and HD springs, etc. This truck lived the second half in the mountains for local use. Regularly, I would shut it down when the snow fell and not get started again until the spring. Charge the battery, pump it a few times and she would always come to life for another season. For the1969 D200 next life, I sold it to a getlman who was gooing to restore it. Onward!
Wow, the transformation from good old Rump was fantastic
It was highly satisfying. It looked like you were "painting" Rump orange.
Just a side note that Valley is not going to be much help until she is older and knows enough what to do. But still, it's very cute to see your daughter helping out.❤
Fix the bed, mirrors, and some newer tyres, and that's a keeper!
Last time you drove it was 2019, I was a junior in high school, i then met my girlfriend who is now my fiance. I loved the original video on this truck, time really does fly!
It's amazing how well the paint came back. It looks great. I also thought the panels were rusty. Maybe you could just put some shine juice on it instead of buffing it out.
I love the old trucks of all makes. Really love the old dodge step side. It would look good with some hardwood flooring in the bed.
Yes i love the old stepside bed on this truck and it is i think a 72 that is why it's a cab mount in cab gas tank,,i had a 74 but I was a club cab short bed so it's gas tank would already be under the bed, but I'm thinking tin grille dodge trucks that 72 was the last year of the in cab behind the seat gas tank
@@richardbates2367 74-75 was the last in cab tank.
Great video Dylan! I had forgot about this truck glad it still runs good
Had that same truck back in the late 70's early 80's, only in a fleet side and a slant straight 6...it was a true "booney basher" and loved it!
Such a cute kiddo! My youngest one and half, can't wait till she is wrenchin with me on my project in near future. 😊
Rump needs a set of white wagon wheels to compliment that orange paint. Would look killer!
One of my favorites just love orange trucks
Great stuff dougal
Your daughter is so cute! She's got a great little smile!
Rump is awesome!
Great video as always! love the truck, I think I have a driver's side door glass you can have if you need it.. I'm in Oneida Tn. I'll check for sure when I get to the house shortly. keep up the good work!
Dylan, make Rump your shop truck and drive it to get parts and local revivals. It looks and sounds way to good to leave it sit. fix that window and add a floor to that bed so its usable in and around town. Save the miles on your newer / every day vehicles and drive something McCool in the process.
I had a 73 fleetside with the 400 bb in it. While visiting a friend in Nebraska, I found an old 361 cid big block with 4bbl carb, took the heads and intake off of it and did a valve job and Carb rebuild and installed them on the 400 motor. I got 19 MPG with that 400 BB!!!
Love this truck got me into liking th tin grilles when I first watched the old video I wonder what mine would look like if I washed it 🤣🤣🤣
Congrats on everything Dylan. The little "helper", the inolved family, the truck coming back to life and doing the thing. And also for having one of the best looking trucks at the show, it is definitely super McCool. Can't wait to see what you make of this one.
Just like Linus we've been patiently waiting for the Great Pumpkin truck known as Rump. Great Job.👍👍🇺🇸🇺🇸
I had a 1980 dodge d-100 step side that my dad restored when I was a kid. Went from a slant six 3spd to a 318 straight motor no emissions and a 727 TF. Sea foam green. It sat for a while and my mom sold it out from under me. Man the stories I have in that truck. I’d give anything to see it again.
Some really nice vehicles at the car show, glad you went and filmed it. Interesting side note very few churches have carparks here in Australia and haven't heard of any churches that have carparks, allowing car shows.
America is the last of the special places.
@@matthewjohnston1400 would necessarily call the US last of the special places, it's definitely different.
I used LMC on my 66 C-10 shortbed stepside had great sevice only thing i didn't like was i ordered a new sending unit after i cleaned out the gas tank and the unit didn't have a sock on the pickup tube nor was it flared so you could fashion one to it . Had to run a double fuel filter on that truck
Also uded them on my 78 Big 10 for a few parts and the 85 Silverado a built for my nephew ! Good company great customer service !
Nice old truck.. great to see ya spending time with your lil baby girl. I remember those days.
Dylan you have a easy flip. Thank you for sharing! 💯👊👍💕
All the truck content lately is real nice. Some Rust-Oleum Reel Orange would look great on that Dodge.
Cool old ride! 🇺🇸
Ah! The old 318. I’ve got a 318 in my 69 Plymouth satellite and that engine is a champ! One of the toughest if not the toughest engine Mopar made.
Hey Dylan, very cool truck, I don’t usually comment on your channel. Your daughter is very cute, and growing fast.
Have a 318 in my wifes 70 belvedere 2 door. 15 yrs ago i tore the body apart and did a restoration and color change. The motor was still running good but i rebuilt it anyway to get about 50hp over stock. Weve owned this csr for almost 30yrs.
I had 318 in my 79 Dodge Power Wagon and bought it back in 1997 fixed it up then a year later got it restored and took it to Carlisle All Mopar Show and came in first place truck division in 2004 with some original part and chrome wheels
@@vernonbolinger9488 very cool! My car has been in the family since 1988 and my grandpa bought it then and my dad has had it and he gave ot back to my grandpa and now I own it. I recently bought a 383 with a 727 to eventually swap out. It was my first car and drove it in high school and now I’m slowly but surely restoring it.
@@michaelgorman4229 I like power wagons! My dad had a 1980 power wagon with a 360 in it with a lift and it looked mean! I took my 69 satellite to Mopar nationals in Shreveport Louisiana and got first in the work in progress class after I got it running
That's a big church, most of our rural churches in Australia would only be about a tenth of the size of the church in the video. But very few of us go to church these days, so a lot of churches closing down and being converted into houses.
What an incredible difference the pressure washer made, VERYYYYYYY satisfying to watch lol.
Finally getting it going again! Awesome!
Your daughter is so sweet!! 😘🍀🍀🍀
looove this truck! Looking forward to more content on it.
I really was hoping the leaf would have been the magic that actually started it.
Gotta do more videos with the kids helping with the cars! This is the best video you’ve ever released Dylan!
Come on Dylan, it's fun having your battery trying to weld itself to your frame, been there done that
Thank you for the great video, I fell transferring to my wheelchair this morning and your video was just what I needed to take my mind off of the pain
Thank you and God Bless 😎😎
Dylan that truck is amazing. Your daughter is absolutely adorable. I can tell she's going to love cars when she gets older.
Nice job guys
Yay! Rump is back.
Can we take a moment to salute that trooper of a starter
I LOVE RUMP! So glad to see it back!
Really like the look the ole rig. I just pulled an 83 out of the woods. It’s got a weird motor setup, originally a slant 6 truck, but has a 360 with a 340 intake, shorty headers, and idk what else. Hope to get it running hear soon! Love these old Dodges
I've loved this truck since you found it in the junk yard. I'm glad you still have it. It's such a cool truck! I'm glad to see you are getting back on the road.
Your daughter is adorable! We were gonna come to the show at your church, but we already had a plan to go to St. Thomas... Next year!
Love the old truck but ya baby girl is beautiful she will learn more as she gets older. Her facial expressions were so adorable.
Absolutely good lookin' truck!! I've got a '97 Ram 1500. Been my daily driver over 27 years. Think I'll keep her.
Excellent video Dylan :) , Bryer :) fixing up this Old Dodge Truck I remember them in my childhood years to and so cool trucks too!
So sad we missed you at the car show! Im bringing my younger brother with me this year to MOPARTY. We drove the Shadow, Saturday to Huntsville before coming to Elora. The car did excellent, despite the shorts in the dashboard! Oil light comes on when idling, temperature gauge hung out to the right. Plenty of oil and antifreeze though! Plus she still does 75+ on the interstate! Proud of this little convertible. We will have to bring Charger to Bowling Green though, need trunk space and protection from weather.
36:36 this may be the best video you have ever put out with your child’s reaction to your car, not starting just pure parenting entertainment
that truck should be restored! Or at least preserved.
Excellent show, beautiful car's, thanks for sharing, all the best to you and your loved ones
Put a new wood floor in it, patch up the rot and Rump will look killer in the future!
yep, 100%
Daisy’s not weird, Daisy is stunned, a distant cousin of Willard 😂
Needs 15×8 steel wheels with dog dish hubcaps and 275/60/15 Cooper cobra tires 😀 love that stepside
Thank you for sharing a Bible verse each video. Many times I get down or depressed and the reminder that the verse brings me helps me to go on and pull through. Love your channels and your vehicles as well. May God continue to bless you and your family mightily. ❤❤
Sadly for the rest of us that have no interest in religion, that's the price we pay to see what Dylan's doing
@@alwynemcintyre2184 If you had no interest,then why did you comment? You must be one of those people who thinks that everyone should be as miserable as you are...
Thanks for letting your real inner self out for all to see on the internet. I will pray for you, and there is absolutely nothing you can do about that. 🙂♥️
What a cute little daughter you have. She was watching your every move. We enjoyed seeing her on the channel! Oh ,and cool truck also! The color Might be a metallic orange. Mopar had a metallic orange back then called Vitamin C! The Lord bless you and the family!
I miss my little brothers being that age they were too cute and and getting them to laugh was the best
That orange paint kinda reminds me of the general Lee and then flashing lights would drive me insane beautiful truck
I am sitting here in tears right now😭 I learned to drive in a orange Dodge stepside just like that my granddaddy had one that he bought from the construction site that he worked for and that's the first truck I ever driven I always wanted to find one Dylan I wish I had the money to try to buy it from you I would great find buddy great find😔
I looked and saw 43 minutes ago and a 59 minute video, and thought, nobody should have commented yet, and first comment I see is “why is there so many bots” anyways I was going to finish junkyard digs most recent video, but now I’m gonna watch this right after, love your vids Dylan.
Great job Pops!. keep it up, you're doing great.
What a find those old Dodges you can't beat them she cleaned up really nice I call it the Orange streak
Very cool truck love it was much fun thanks 👍👍👍👍👍😊
OOO she is soo adorable! we are having our third and are at 8 weeks now. We have our first ultra sound tomorrow!
Great content guys 👏. Thanks for sharing your daughter with us,she is very cute,an U guys are very blessed 😍.
Pretty little girl my friend and congratulations to you and your wife. RESPECT ✌️
Beautiful truck.
This was my first video i ever watched of yours been here ever sents old rump love it and you have a beautiful little girl im a dad of 1 girl also congratulations
rump is back good job
Great video. I enjoyed the car show! Hopefully next year my
89 s10 be running
A new set of wheels and tires and she'll probably stop the shaky shake. Or maybe it just seemed like it was doing that. Nope it was doin that LOL. Love the car trucks and the channel!! Thank you! Oh and the Baby!! She's a sweetie! But what baby isn't??
Nice job sir Nice Dodge truck Nice show sir 😃👏👏👏👍👍👍👍
Nothing like having the gas tank right behind you, lol
It was great to meet you at the car show Dylan! Hopefully we'll see you again at Moparty!
You are a blessed man my friend. 😊
Great video! Might could do a video of rust prevention on some of your cars, winter will be here soon.
dude nice d100
Oh what a gas tastrify lol and the most beautiful thing about that truck was the mini version of you in there
Hi ya Dylan, hope you’re doing good dude
I think the coolest part about that D100 other than the fact that it cleaned up so well is that homemade shifter that thing is awesome
Reminds me of Kevin's mopar, had the same matte look when dry. I do believe he buffed and polished it, came out more red then orange after.
Hi Dylan and Brier and Rump nice video 📹 and workmanship the trucks cool 😎!!! Is that a Dukes of hazzard color !!! Was that TOP CAT PETTY PULLING IT OUT OF THE SPOT LOL
I'd like to see this truck get some real love starting with fuel injection. A few body and bed mounts might be nice but new bushings all around is a must. Put some suspension in there and she's a daily driver.
Daddy and daughter gets more ❤.. precious
What a great truck , I can’t recall if you have a dedicated “shop” truck and if you don’t I feel this ol’ girl would be up to the task Dylan . The orange and black scheme works well together. Cheers 🇨🇦
Dylan, you're a daddy now.....your voice is still cracking!!!! Stay young at heart!
Long overdue for Rump! Get a door glass asap. My 72 gad thise same junkie after market mirrors at the same weird angle. Agree with the old barn wood fir the bed. Hope to see a lot more of Rump
WOW its Orange, I thought that was rust
Rump is back baby!
At least you have something there that can be fun and last!!!
Watche Dylan do the burnout co test at Moparty a few hours ago. He totally should have won! Bad crowd. You did a fantastic job sir!
Praise God from whom all blessings flow... after a very long day of work, this video was a delight! Thank you.
I dont think they changed those step side beds at all in the 60-70s, I have a 59 out back and the bed looks identical as far as I can tell.