Cheap Chinese LCD Screen For Electric Bike (WIRE CONNECTIONS)
HTML-код
- Опубликовано: 12 сен 2024
- Patreon - / evcustoms
Channel Support - www.paypal.com...
EV-Customs Website - ev-customs.com
Instagram - / ev_customs
Facebook - goo.gl/tu3Qdk
Music - A Himitsu No Copyright Music
thank you so much i needed this to much for a "project" I was working on
PS: keep an eye out for the 5th of December ;)
Hi, thanks for the helpful video. At 1:20 u mentioned 'voltage choice connection' what is that? (I got a display with a similar wire too)
This screen looks very similar to the NIU NQi LCD Display! May be it's from the same manufacturer, but the display for NIU is customized and communicates over the RS-485 bus whith the ECU of the NIU.
Just wondering why you don’t ever speak in your videos? I know you probably think just by pointing at something we all might understand but words along with video is always better. Your channel is awesome, just wish you would talk about what your doing.
Hi Kevin.. i will try on my next videos..
Looks good, I like the large battery indicator and speed digits. Seems a little bulky though, have any images of it mounted to a bike?
I must search for that... :)
@@EVCustoms where to find motor phase
@@Hapit_TV looks like in motor )
Gran video amigo es posible usar este LCD en una controladora para scooter 48v, gracias
Hello. Thanks for such a great video. I'm trying to install mine and I just don't know where to connect the light and blinkers 😕 could you explain how you did it? Should I just connect the light wire of this display to the lighting circuit? Thanks in advance
If you didn't do it already you can connect 12V or 5V ground to the ground that is coming to the display and positive12 or 5V to each wire (left, light, right)
Could you tell me where to buy it or pls share me the link. Many thanks :D
I need help all my lights are 12v but I need 72v input. Can I change something on the Display, for exempel to remove the resistors on the lines wich I need to be 12v input.
Did you find out about 12v or 72v, I have same dilemma on scooter I'm building, should I hook up 72v to positive on the odometer or 12v
Hey, I am building my own e-bike and was wondering if there is any controller for this and I did not understand what the turn right and turn left is. Can you please help me?
Wonder if this could be wired to work on a Daymak Em1...🤔🤔
Gracias, excelente aporte. Siempre nos sucede lo mismo por falta de diagrama de conexión...👍
Gustavo, cómo conseguiste conectarlo? Tengo una pantalla similar, el positivo y negativo van a la batería, el de la velocidad a una fase del motor pero y la Luces e intermitentes? Se conectan directamente al circuito de Luces?
@@alex-eucmad.7133 @Alex - EUCmad. Deberías consultar escribiendo en inglés a quién subió el vídeo.
De todas formas en el vídeo (me parece que 2:41) muestra una referencia de cables por color discriminado por función y que pudo determinar previo acceder al circuito-plaqueta. Luego con un cable (+) comienza a probar las lámparas de giro, luz alta, etc. es decir que deberías tomar el positivo de tu lámpara de giro derecho y conectarlo al cable de la consola..en el caso de error cuando actives el giro encenderá la la lámpara del otro lado o quedará intermitente la luz alta 🤔 ...
Recuerda que puedes tomar una foto de tu dispositivo googlear por foto y encontrarás mucha info., en algunos casos yo encontré diagrama de conexión directamente del fabricante que oferta todos sus productos en China por las grandes plataformas de venta internacional 👌
PDT: Por regla general (global) las lámparas, intermitentes, etc funcionan a 12V 🕵️
@@roman_abelardo si, ya le pregunté en inglés a l persona que subió el vídeo. El problema es que mi modelo de moto sólo se fabrica aquí en España y no hay nada de información en internet. Por eso preguntaba. Muchas gracias
thank you! I ordered a goofy color LED version of the display on Aliexpress for $10 USD. So I'll follow your steps here when I connect it to my generic motor hub kit.
i wish there was no music, i also wish there was talking, but i still like the videos you upload
Sorry about that my friend... you must know that this videos is to old... now i am trying to talk on my videos..
Hello, i have similar display but i noticed that when I apply resistance to the motor (riding up the hill) the display increases the speed even though the speed of the bike remains the same. So in other words it shows wrong speed measurement.
Any idea about that?
Kool stuff bro..I am using the ct-22 from Q's motors...I think that the best one once you get pass the mounting challenges..lol!
great music but it takes away from if you are trying to help some one that doesn’t know what u are how about slowly talking us thru
I have this speedometer and backlit is not glowing anymore.. How to repair ? please reply
hi im wondering if you can help? i just got an lcd for my scooter 60v 2000w brushless. there is a wire marked "speed" on the lcd where would i connect it im assuming its for the speedometer but there is no speed wire on my controller.
Hello friend... this speed wire must be connected on any from three hub motor power wires.
@@EVCustoms thanks for the reply man really appreciate it
Price,& where to buy
Nice Video
Does it show the Amps (current) used
Hi friend... Unfortunately this screen does not have this option...
justamente instale un traductor de chino al español en el telefono para traducir esas dichosas letricas, he reparado varias la mayoria se van por los diodos de la pantalla si fallan por falso se apaga la pantalla y el voltaje que esta en el circuito de diodos es como un voltage de referencia para la placa. Saludos de cuba para grecia
We sell city coco with this display. Light is when headlight are activated. Think it's a 12v signal. Battery indicator is for 60v. Don't know if it's reprogrammable.
Comprei 2 painéis já, e nenhum tem o potenciômetro de calibração de velocidade, 😢
Very nice video,good job,thanks for your help
Precio y donde comprar y si es compatible con una TST Buddy GRP 20x4
So the battery will always flash empty and the speed will never read correct?
A motor has 3 wires for the power, and 5 for the hall sensor, what exactly can a controller do with those wires and is the display just showing the voltage and counting the pulse from one power wire, connected to the battery and one phase.
What if the controller has a microprocessor on it that connects to a display, can't that do a lot more but what protocol does it use and how does the display decode it?
No relief in the cables then could have at least popped some white goop on there and open to the elements.
Can't see this being long lived..
Is there any con formal coating on the PCB?
Hi, How to enter the battery SOC chart values ? I replaced my escooter's lead acid battery with Li ion battery, now it is not showing correct charge value.
Did you get answer for your question? I am also interested in same
@@kingoftheput no response from anyone. I think Li ion battery and lead acid battery keeps similar terminal voltage corresponding to the charge, but Li LFP battery seems problematic. Irrespective of charge in the battery it maintains its terminal voltage closer to the rated voltage.
Same with me. I have changed 6 PB batteries to 20S liion,and I don't have correct reading on my display. I found my display very similar to this one by wires coming out of display body. So I thought it will be similar for adjustments... My display shows drop of voltage only moment before BMS cuts of battery...
Hola qe tal tengo una TRIMOTO eléctrica y en la pantalla LCD vienen 2 cables con una etiqueta qe dice 60 v y 48v.
Pero vienen desconectado
La pregunta es te lo que conectarlo porqe todo funciona igual esté o no conectado
Does this display show the temperature of the motor?
Top left or is it the air temperature?
Hey what type of lcd screen is that ,could u send me a link
Tried to connect speed signal to phase wire but it didn’t work. Connected it to blue phase wire.
How can I use the One-line wire (usually yellow) instead of the Analog wire (purple) to measure speed ?
What will happen if I don't connect white wire(speed) to anything?
Hi, can you please let me know if it is showing the total trip? I have the same one but I can't get it to show me the total trip,
Meter price???
Sir can you please tell me where to buy it... Pleaee provide me the buying link.... 😢
Price please
Hi. My display is left with one purple wire and one white wire. Where do I connect those 2 wires. I know white is for speed and purple for HL Hall.but I don't know where to connect them to
Do you have only electric bike meter or Petrol bike's too?
Did you get it how to get 3 speed display status???
gracias por el video puede poner el link donde comprarlo gracias===thanks for the video you can put the link where to buy it thanks
To show speed on the speedometer which wire to be connected
Hello friend, could you please write me what type of display it is? One with hall speed wire and second yxt type. I'd like to install it on an electric scooter, but you're too far away. Thanks!
The white cable from te meter, to what wire did you connect is from te moter?
how do you set the mode? like the gear in electric scooter that has 3 gears
Clearly the guy was just showing off no help at all.
I replaced my controller with a higher specs but my speedometer didn't work. I did double check my wirings and all was on their right position. Can I do something about it?
Can I put this on a fiido D3
what does mean by buck out i have cluster which have one pin with buck out can you explain me
Battery temperature, most likely.
I have problem with my Rawaton Recon / exactly same display / speedometer going up to 20km and no more regardles Im driving over 20km/h also battery meter is stuck with full charge display /all dots/ regardless of actual battery status .. any idea ?
Hi mate! What do you call your dc voltage supply you are using? Thanks
How much current on the phase wire for the speed sensor? Can a 24v RPM gauge can handle it?
Where did you buy it, cant find
Hi I have similar speedometer but, the merchant give me hall wire. Where do I need to connect the wire hall? Thankyou
dear sir kindle let me know about digital color meter wiring note Red wire will connect controller Red, Green will connect with black of controller while black will be connect with motor face wire but meter is not showing speed in km
you got the website where you buy the LCD screen??
how about to set speeddometer on non hub motor like chain or gear type
Tegangan untuk lampu senja dan sen juga harus sama seperti vcc ya mas???
it can be work on kelly controllers?
How to connect kilometers which is the wire?
What speed does it show? The speed depends on the diameter of the wheel.
Normally you enter that in the parameters of the display. This was showing the default wheels size.
@@NeilSnapePhotography hi, I have the same problem, do you know how to adjust this parameter? For sure the speed presented is only a estimation / default value.
hey man they said speedometer has two variant phase wire motor connection and hall sensor? is it true how to know?
Hi... you can try it, but first with hall sensors because there is low voltage, if is working fine live it there.
Tnx man i tried in hall sensor and its accurate thn when i put it in the phase motor its true that speedo have two types. My problem now is the battery gauge always zero😂
Hello,
I have same display and motor having 72V and 3KW and kelly controller KLS7218MC. When I attached this display, It can't show me speed, trip and battery%. can you help me in this?
doet it work on 48 volt ebike?
hallo sir, I need this meter Please tell me.....!
Sir contact me plsss
how to settings wheel speed? help me please...
No gear display?
high and low speed in lcd? where to connect tnx
how do you connect that same lcd to daul hub motors?
hey whats up how did you bild that white box the one were you control the speed i need one like that.
thanks
Simple e-bike controller in the box :) if more subscribers want to see how to make this simple controller box.. I will make one video for that...
@@EVCustoms please do 👍🙂
Please do
Hi. Have similar situation of white speed wire on display but not on motor sensor wire loom (has only the 5 standard wires). Didn't quite get what you connected it to to register speed on display. You write 'connected to any free phase motor wire'. Do you mean 'three phase'? as I do not have any 'free' ones - they are all used. Could you please explain more clearly, as I was going to get an external speed sensor to hook up somehow. Thanks
Hi friend... i mean connect on any phase power (on yellow or blue or green) wire, don't disconnect any power wire, connect it in parallel with power wire.
@@EVCustoms Thanks - just learning about all this stuff. So, if I double up a wire with any of the phases and run it to the spare pin on the 6 pin hall sensor wires connector (between red and black), to match white wire from display, speed will register on display? Ok... so the display can handle the 35VAC (on a 48v system) that the phase wire put out? Oh, by the way, I'm doing a conversion to a Bafang 750w GEARED motor. Still applies?
@@joc1862 My friend you confuse me now, have you same display? if yes find your speed meter wire of display witch in your case is white,,, and connect it on one thick power wire of the motor, with geared motor also is can working.
@@joc1862 And don't worry about hi voltage on your phases...
@@EVCustoms Hi again, thanks for your patience. I'm confused myself! Checked it out on the bike this morning and realised I got it wrong. My display does not have a white wire on it. Has 5 wires - Y, G, Black, Blue, Red. It is my motor, the hall sensor lines, that has the white wire as well as the other 5, coming from it. Problem is, the new, larger, contoller I changed to, does not have it on it's sensor connector - no white wire going in to the controller, so speed would not be registered inside controller to output to display. This is a work in progress and have not hooked up display to controller because wiring does not match - this is what I'm trying to sort out. Running bike with throttle only and no display. Mistakenly thought your white wire hookup would solve part of my problem.
Hi, whats if my motor hall sensor only have 5 wire?
hello sir, can i ask you for display wirings, where can i contact you, thank you.
hello friend, where can I buy that lcd display for e-bike?
can you send me display details and where i can buy??
hello that display have settings software
How can i fix this on my electric bike
where can we buy it?
now how do connect the speed switch
can you ship this product to india ?
How do you know the motor wattage?
Link to Part? Please add where you acquired LCD Screen.
Found it...
www.dhgate.com/product/lcd-display-48v60v72v84v96v-speedometer-light/440166645.html
How do you do u do this as you need to have the connections from the hub motor going to the controller??
And also how would the throttle work?
Is there a way to switch to MPH?
how to reset its odo
How exactly does this speedometer show the discharge of a lithium battery?
By its volt
Price?
How to set speed limit
এই মিটার কোথায় এবং কিভাবে পাওয়া যাবে ৪৮ ভোল্ট সাইকেল এর জন্য
Is This Universal For Every Electric Scooter ?
Yes my friend..
Online speedometer chahiye bhai saste ma koi link hai
Mare pass hero optima hai 2015 model wali
Up to what voltage?
Up to 72Volts nominal... 84Volts max
20S lithium battery..
@@EVCustoms cool
how can i connect blinkers to the front and back? so when i blink from the speedometer then it blinks in front and the back
Sorry?
EV - Customs how can i connect blinkers, in The front/back to this?
Hello how did you callibrate the wheel size on this screen?
i wonder about that too
how to change temp C to current A option in ebike universal display ? i saw a guy did on youtube but didn't show the method
Hmmm interesting... have you any URL to check?
@@EVCustoms I will try to find that video and share it’s link here , I ask him in comments but didn’t got any reply , most of these LCD meters have C , A, ? Three options , by default they come as temperature meter, I have JK BMS and I can monitor battery temperature via app , and I don’t have temperature sensor in hub motor , that’s why in meter temperature option is useless , if I could somehow be able to change it to Amp draw. That would be so cool to see amps on meter.
@@EVCustoms ruclips.net/video/r9OgozAJDYg/видео.html
Ah ok... This guy have different speed meter screen, this type of screens have extra shunt input, which can measure millivolts end convert it to current, my screen didn't have shunt input..
@@EVCustoms oh , ok 👍🏼 thank you
Wantef lcd display only
How mutvh
how much the coast
Hello sir ye Meter Mike chahiye please Link de dijiye