I also need to change the wiring harness to the left low beam light. I wonder if that could be causing my truck to act all crazy electorally and not start? or other problems I am having in my description above?
This is a great starting point for me. . . TY. . sounds as if YOU know wwhat you are sharing. . love that you asked for advice. . . sign of a humble soul. . ;-}
That is not the starter fuse… In my 2013 the starter fuse is the 40amp one to the top right of the starter relay. Look up any 2007-13 1500 fuse box diagram.
I’m having the issue with Escalade 6.2 2010 It clicks but won’t start tomorrow I’m going to try to check the starter relay and also do the old trick hitting the starter
On my 2009 chevy Silverado I just replaced the flex plate and now the starter would work at times and wouldn’t so I would have to take it off and put it back on and it would work another 3 times and do the same thing and now I got a new starter and still does the same thing snyone have any idea what it could be ? Maybe the fuse or the relay or battery ? Anything helps 😢
This may just help me with my problem. My gages will sometime get power and or radio or will do nothing at all and not start. other times the power to the gages will work but not radio and it will start and run just fine, sometime just my radio and AC will work but gages go back off, but it starts and runs fine. best case everything comes on and it starts and runs fine but I will almost always have to take of the ground wire and wait 10 secs. to 10 Mins. For it to finally start up one way or the other. One other thing I noticed. when it appears to be working and running just fine, the ac controls won't work or the volume on my steering wheel to turn down or up the radio won't work. This has been a HUGE STUMPER to me. I think it happened when I was jumping my truck because my battery appeared dead. Got a and I heard something pop electrical like a hot touching a ground from the fuse box or EMC area under the fuse box almost / Same general area for both. I will try these fuses tomorrow. ECM or says (PWR TRN) fuse and starter fuse. I already checked Mosty all of them if not all, but it wouldn't start for me after about 45 mins of taking the neg. battery wire off and on after work. Even tried to reset the EMC by connecting the hot battery terminal to the neg ground wire not hooked to the battery. after that still no power to the cluster gages at all sometimes I would get Radio AC cab lights windows would work as well but when i did get power to the gages they would just go back off. they stayed on one time, and this has also happened a few other times it would start then turn right back off or shut off...like no fule or something. - Reset neg battery wire and would work fine or reset again until it did. But now it won't. you get the picture!!! X my fingers for tomorrow. 4/27/22 ...
Also, I checked the wires at ground points and hot points from battery to other lead end and sanded the area clean. If the 2 fuses, I try tomorrow don't work it must be the ECM itself (Meaning the Computer Control module).
I watched your video because my truck wont start... I think it may have to do with the gear shift indicator. Can you elaborate on that issue? My truck was working fine and now its not showing what gear I am in and wont start.
@@ivansantos5435 ever figure yours out? I'm have a no power no start on 08 Silverado. it was starting after i reset the ground wire on and off. but it quit it appears today. left it on the job.
@@awayne03 im not sure what part on the shifter hes talking about, I fixed my problem but it was due to bad wiring some guy had done previously, so I had to sort that mess out
When connecting those two point to start the truck. Nothing happens. I have a good battery and good starter my engine is not seized. Where could I have a bad connection?
I was literally stranded and just swapped the headlight fuse and it started. Thank you so much. Clear quick instructions. Much love
I also need to change the wiring harness to the left low beam light. I wonder if that could be causing my truck to act all crazy electorally and not start? or other problems I am having in my description above?
Dude i did what you show on the video and got me out of problems thank you very much
Excellent troubleshooting video 👍
Great tips, great video
this video helped me alot! thank you !
Thanks got my truck running
appreciate you bro just got me home
Muy bien explicado
Thank you. This is a big help
Did you ever figure yours out? I'm having a bad day for sure today. It won't start half the time. today not at all after work. left on job.
my key will not send power to the starter I can bypass the relay and crank the engine but then i have not spark or fuel. any thoughts?
Thank you! Very helpful
thanks I didn't figure it out but I ruled some stuff out and I'm on track
good job
This is a great starting point for me. . . TY. . sounds as if YOU know wwhat you are sharing. . love that you asked for advice. . . sign of a humble soul. . ;-}
great starting point for me as well. I'm going through a rough time with mine...
Thank you for the video
Had the 2amp fuse blow as well
That is not the starter fuse… In my 2013 the starter fuse is the 40amp one to the top right of the starter relay. Look up any 2007-13 1500 fuse box diagram.
How do you check and replace the fuse behind the battery
My 2009 will start but dies within seconds. Any advice? Thanks.
What happens if you connect the red and grey
Mine doesn’t get any power and seems to be a good battery. I’m going to try these tips.
Ever figure out the issue? I’m having a similar situation.
@@bengonzalez1730 same or similar.
having a bad time with mine... posted a comment with what it's doing above.
Grasias👍👍
So my 2008 starts but sometimes it keeps cranking then I have to turn it off and try again
I just did all steps, not able to get it started with out going straight to starter. But it will not turn on with key? What can be the next step?
I think the 40 Amp green fuse is the fuse for starter
Yes it is in a 2011 Tahoe! It is important to check the manual. 40A is the correct rating for the starter circuit.
On my 2008 sierra the green 40amp is the starter as well
I’m having the issue with Escalade 6.2 2010
It clicks but won’t start tomorrow I’m going to try to check the starter relay and also do the old trick hitting the starter
Ever find out what it was?
In most cases it would be bad connection on your battery or ground. You may want to check it
On my 2009 chevy Silverado I just replaced the flex plate and now the starter would work at times and wouldn’t so I would have to take it off and put it back on and it would work another 3 times and do the same thing and now I got a new starter and still does the same thing snyone have any idea what it could be ? Maybe the fuse or the relay or battery ? Anything helps 😢
This may just help me with my problem. My gages will sometime get power and or radio or will do nothing at all and not start. other times the power to the gages will work but not radio and it will start and run just fine, sometime just my radio and AC will work but gages go back off, but it starts and runs fine. best case everything comes on and it starts and runs fine but I will almost always have to take of the ground wire and wait 10 secs. to 10 Mins. For it to finally start up one way or the other. One other thing I noticed. when it appears to be working and running just fine, the ac controls won't work or the volume on my steering wheel to turn down or up the radio won't work. This has been a HUGE STUMPER to me. I think it happened when I was jumping my truck because my battery appeared dead. Got a and I heard something pop electrical like a hot touching a ground from the fuse box or EMC area under the fuse box almost / Same general area for both. I will try these fuses tomorrow. ECM or says (PWR TRN) fuse and starter fuse. I already checked Mosty all of them if not all, but it wouldn't start for me after about 45 mins of taking the neg. battery wire off and on after work. Even tried to reset the EMC by connecting the hot battery terminal to the neg ground wire not hooked to the battery. after that still no power to the cluster gages at all sometimes I would get Radio AC cab lights windows would work as well but when i did get power to the gages they would just go back off. they stayed on one time, and this has also happened a few other times it would start then turn right back off or shut off...like no fule or something. - Reset neg battery wire and would work fine or reset again until it did. But now it won't. you get the picture!!! X my fingers for tomorrow. 4/27/22 ...
Also, I checked the wires at ground points and hot points from battery to other lead end and sanded the area clean. If the 2 fuses, I try tomorrow don't work it must be the ECM itself
(Meaning the Computer Control module).
I watched your video because my truck wont start... I think it may have to do with the gear shift indicator. Can you elaborate on that issue? My truck was working fine and now its not showing what gear I am in and wont start.
Samee
Ever figure it out? H
I'm having the same problem
I have a 2005 Chevy Tahoe it won’t turn over I’ve changed alternator still nothing
I just replace the starter relay, and it was working for a while only then again the truck doesn’t star
Must be your ground , I’m having the same problem right now , did you find out your problem ?
@@Hauntedteepee is something on the shifter lever
@@ivansantos5435 ever figure yours out? I'm have a no power no start on 08 Silverado. it was starting after i reset the ground wire on and off. but it quit it appears today. left it on the job.
@@Hauntedteepee Same problem. What on the shifter was the guy talking about? I thought it was my ignition switch for a while... but don't know now...
@@awayne03 im not sure what part on the shifter hes talking about, I fixed my problem but it was due to bad wiring some guy had done previously, so I had to sort that mess out
When connecting those two point to start the truck. Nothing happens. I have a good battery and good starter my engine is not seized. Where could I have a bad connection?
I have the same question lol find anything?
Help 09 Silverado took battery cable to reset my mirrors switch want start now raido. Continues to play Help please
Swap mines out and still no starters
My ignition fuse keep blowing in silverado 6.0 2013