SLOG3 LUT pack giveaway winner from last week will be announced in the next video this week :) Also means there's two giveaway winners for next week ;)
i dont think that wobble makes issue and but can it handle the weight of a7iv and sigma 24-70 easily blindly or is the joby 3k trust worthy enough? for vlogging and etc
@@StSoltaa 2kg payload so yes it can handle it but when you extend it, the tripod slowly goes down lol.... joby 3k kit is definitely trust worthy enough. have used a 24-70 GM with it and that is a chunky monkey
Man! I wish you all the best for the success of your channel! very professional and engaging. Love what you do! I want your LUTs so, tripod I like all the ulanzi gear (value for money) so I bet this tripod is as good as the rest of their hardware
I'm wondering if that wobble thing part is a Stabilizer? Hahaha since i don't have any tripod and accessories it will be helpful on my zve10✨ wish me luck
I think the wobble might be an issue if you are going to be mobile and travel quite a bit with a slightly heavier setup, however, at home or studio use with a camera like A7C might be Ok!
That wobble is frustrating. Probably due to the fact that it’s all or mostly plastic? We leave for Peru next week and we can’t justify paying over $100 for the Joby 3k Pro so looking for alternatives. Would you feel confident vlogging on the Ulanzi with the A7iv? We have the same camera.
It’s actually almost all metal but I’m still not sure why it’s wobbly. I guess it’s not built for heavier setups. When you also extend the tripod and put it on a table, it goes down slowly because it can’t handle the weight 😅 I have the joby one and it’s 3 yrs old still holds up nice. I just don’t like the legs since you always have to straighten it.
@@VictorLaforteza, thanks for the response! The joby is great, we wish it was a bit cheaper though. Ulanzi makes another tripod similar to the joby the tripod legs aren’t fixed but they can bend and move around I’m sure you’ve seen it but it doesn’t have the arca swiss only the 1/4 in thread which is disappointing. Marlon has the peak design clip with the arca Swiss because he likes to clip the camera onto his shoulder strap on his backpack. Probably end up buying this Mt-46 and see how it works out.
I'm using some off-brand tripod that's a bit longer since I only own the 28-75 so need every bit of distance it provides lol its stable though and I think knowing that little bit of wobble being there would be noticeable at least to me if no one else
The wiggle would definitely bother me. I’m still currently using my weebil s gimbal as my vlogging tripod. Overkill but it works for me. In the market for something smaller though.
You must have smooth vlogs!!! I’m currently trying out the crane m2s. It’s light enough for vlogging but can’t handle the a7iv 24mm combo.. gorillapod still wins this round..
both are the same just the mount is different. 46 has the f38 quick release and the 47 has the normal "arca swiss" kinda of mount that is generic for a lot of tripods
SLOG3 LUT pack giveaway winner from last week will be announced in the next video this week :) Also means there's two giveaway winners for next week ;)
i dont think that wobble makes issue and but can it handle the weight of a7iv and sigma 24-70 easily blindly or is the joby 3k trust worthy enough? for vlogging and etc
@@StSoltaa 2kg payload so yes it can handle it but when you extend it, the tripod slowly goes down lol.... joby 3k kit is definitely trust worthy enough. have used a 24-70 GM with it and that is a chunky monkey
Kia ora! Learning heaps from your vids thanks. Beginner here learning with ZV-E10. Having a Ulanzi tripod would be awesome for my vlogging exp.
hi how is your experience with your Ulanzi so far. Im buying a ZV-E10 as well and looking for an affordable tripod!
I like how tiny it is compared to the joby gorillapod. Wobble wouldn't matter much because i use a small camera ❤️
Great video! I wonder how easily the fully extended tripod would tip during fully extended mode. Would love to try it out!
Man! I wish you all the best for the success of your channel! very professional and engaging. Love what you do!
I want your LUTs so, tripod I like all the ulanzi gear (value for money) so I bet this tripod is as good as the rest of their hardware
Thank you man! Best of luck on the giveaway :)
Does the MT-47 also have this wobble?
I'm wondering if that wobble thing part is a Stabilizer? Hahaha since i don't have any tripod and accessories it will be helpful on my zve10✨ wish me luck
That is not arca swiss mount , that is falcam F38 quick release system.
It is very useful if you're in this 'falcam F38' ecosystem
Well yeah but it fits on arca Swiss base plates too
Appreciate the honest review 🤙🏻🤙🏻
I think the wobble might be an issue if you are going to be mobile and travel quite a bit with a slightly heavier setup, however, at home or studio use with a camera like A7C might be Ok!
definitely my thoughts!! should be good with a smaller setup!
Thanks for the honest review! I think this is a good choice for a lightweight camera and lens. Or a compact option to take with you on a trip :)
It was definitely not too bad on the zv-e10!
That wobble is frustrating. Probably due to the fact that it’s all or mostly plastic?
We leave for Peru next week and we can’t justify paying over $100 for the Joby 3k Pro so looking for alternatives. Would you feel confident vlogging on the Ulanzi with the A7iv? We have the same camera.
It’s actually almost all metal but I’m still not sure why it’s wobbly. I guess it’s not built for heavier setups. When you also extend the tripod and put it on a table, it goes down slowly because it can’t handle the weight 😅 I have the joby one and it’s 3 yrs old still holds up nice. I just don’t like the legs since you always have to straighten it.
@@VictorLaforteza, thanks for the response! The joby is great, we wish it was a bit cheaper though.
Ulanzi makes another tripod similar to the joby the tripod legs aren’t fixed but they can bend and move around I’m sure you’ve seen it but it doesn’t have the arca swiss only the 1/4 in thread which is disappointing.
Marlon has the peak design clip with the arca Swiss because he likes to clip the camera onto his shoulder strap on his backpack. Probably end up buying this Mt-46 and see how it works out.
I'm using some off-brand tripod that's a bit longer since I only own the 28-75 so need every bit of distance it provides lol its stable though and I think knowing that little bit of wobble being there would be noticeable at least to me if no one else
Ya if it works, it works!! The wobble was definitely weird on this one..
Kinda tempted to get this. Is this compatible with the Peak Design dual plate? 😀
Could work but not really sure… kinda threw me off when I tried using my other arca Swiss
Ulanzi do make some pretty neat stuff 👀
Yes the wobble would bother me. If they fix the wobble on an updated version, then I'll buy one.
Exactly my thoughts!
i was tempted on getting that lil boy after my joby 3K started to fall apart lol it looks like a great option
What happened to your Gorillapod? Just long term wear and tear???
I always like Ulanzi's product, the wobble probably wont bother me~ lol nice review like always.
It is nice camera equipment. U see for me here in Africa I can't complain bcoz such things we can't afford we only see it on the internet
The wobble might be a little issue. But it sure looks compact!
Nice little handy tripod for sure! Maybe best for smaller setups 🙌🏽
The wiggle would definitely bother me. I’m still currently using my weebil s gimbal as my vlogging tripod. Overkill but it works for me. In the market for something smaller though.
You must have smooth vlogs!!! I’m currently trying out the crane m2s. It’s light enough for vlogging but can’t handle the a7iv 24mm combo.. gorillapod still wins this round..
@@VictorLaforteza have you looked into the crane m3? Been wondering about that too
I just got mine MT-46, no wobble at all...Sony a6600 + Sony 11/1.8
That’s good! You’ve got a light setup
the wobble definitely would give me anxiety - no way we're mounting a 2k camera w/ a 2k lens on that 🥹
Ya it gave me anxiety just trying it out in the house 😂😂
Update?
Love your videos as always victor! lets go to 10K subs!!
thank you bro!! lets goooo we are getting there :D
Which one is better mt 46 or mt 47?
both are the same just the mount is different. 46 has the f38 quick release and the 47 has the normal "arca swiss" kinda of mount that is generic for a lot of tripods
@@VictorLaforteza thank you for the reply 🙏
I wouldn’t mind the wobble at all!
It’s not bad for smaller cameras!!
I wanted to use it w/ my ZV e10 but considering the camera already doesn’t hav stabilization I’m iffy
definitely agree with you!
FIRST viewer
so I win this
It’s a random draw on the comments 😇😇 best of luck!