BEST Travel Tripod of 2023 - NOT Peak Design

Поделиться
HTML-код
  • Опубликовано: 21 дек 2024

Комментарии • 520

  • @chaseadventures
    @chaseadventures 2 года назад +23

    Hey man I just wanted to say your videos are really really good. They're punchy, information dense, but entertaining at the same time. As someone who is just getting started making adventure films your content has been really helpful to optimize my gear, settings, etc to get the most out of what I've got. Thank you!

  • @Docdug
    @Docdug 2 года назад +8

    This summer I upped my travel tripod. I have the PD CF and like others have commented, it is somewhat flimsy. I now mainly use my PD when I just have my iPhone with me.
    Otherwise, I upgraded to the RRS Ascend tripod, which at 5x the cost of the Ulanzi is ridiculously expensive. And like everything else RRS makes, it is made in the US and it is extremely robust.
    The RRS will get a terrific workout later this month as I head to Nepal for a trekking tour!
    Cheers
    Doc

  • @keith5824
    @keith5824 2 года назад +41

    Years ago I bought PDTT because of those fancy cool designs and terrific reviews. Yet at it’s arrival I immediately felt the weight, which is much heavier than my previous tripod. But that’s fine, it’s cool, I’ll give it a shot. Years later the pain just grows more and more.
    - The key was lost in my first year
    - it is so much pain to flip it to portrait mode
    - it’s flimsy AF and shake like a jelly in the wind
    - u do feel the weight every single day
    - it is not fast to setup / pack the legs compared to my previous rotation lock ones
    - the rotation ring on ball head cannot guarantee a precise adjustment, especially with a heavy lens. Once locked it drift down a little bit. And it can be a huge pain to frame when shooting at 400mm or more
    - had to pay extra for a spike feet. When I do astrophotography it can very oftentimes stay there for hours. And a slight movement can ruin my stacking. Yet even with careful attention I still accidentally scrubbed / kicked/ touched in the dark several times. Buying spike feet is a must, yet still changing footpad is a pain bc I lost that damn alien wrench on my first year in the field
    Just like you said, a cool awesome fancy design may not be as efficient. I do agree. Im only raising my pain tho, absolutely no tripod can beat it in the cool factor. But as a landscape / astro / wildlife photographer going out almost every single week, the weight and awkward to use flimsy ball head is a real pain in the ass - again especially with longer lenses like 400mm. With that price tho, it kept me as a customer bc I don’t want to admit my wrong decision and pay a bunch to buy another
    *THE PAIN COMES TO ME MAY NOT COME TO YOU. THIS IS SOLELY ** MY OWN ** EXPERIENCE BASED ON MY DAILY USAGE.
    IF U LIKE IT, GOOD, IM HAPPY FOR U. IM NOT HERE TO FIGHT, JUST SHARING MY OWN EXPERIENCE

  • @MotoFeelz
    @MotoFeelz 2 года назад +2

    Haha I was wondering what label make you use - glad I stuck around.
    You sold me on the Ulanzi. The speed and mobility of the ball head is a game changer for me personally. Awesome honest review 👊

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      Thanks for sticking around to the end Moto Feelz! I appreciate you watching man!

  • @HikingwithGus
    @HikingwithGus 2 года назад +12

    I have been using the ULANZI Mini Flexible Tripod for my back-country videos and love it. I dumped my Jobi after years of frustration with it's legs falling off. The PD Tripod has been on my radar for sometime now but the cost was ridicules. This looks like the ticket for me. Thanks for the review!

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      Stoked to hear that Gus, I've looked at their flexible tripods for awhile now and couldn't make up my mind. I'll for sure pick one up to test out. And as for travel tripods, the Ulanzi is for sure the way to go!

  • @chrisholland8226
    @chrisholland8226 2 года назад +2

    What type of carrying case does the Ulanzi come with compared to the peak? Other than the approx 1 inch height difference, how do they compare in packing space?

  • @frstesiste7670
    @frstesiste7670 2 года назад +26

    I've had the PD tripod for around 2.5 years now. The allen key on the leg has never fallen off for me. Totally agree about the head. It's clearly the weak point of the PD. I can kind of see why they did it. There are no knobs or levers that stick out from the head, making it slightly more packable, but with the disadvantages you mention. Also the PD head have trouble with quite a few third part plates because the thing that holds the plate in place is (too) low.
    To me packed size is super important and really the main, maybe only reason for getting the PD. Seems like the PD is a bit smaller packed than the Ulanzi tipod, at least in length and you don't mention (or maybe I missed it) packed diameter. Btw, when looking at length a Gitzo Traveler (5 section legs, series 1) is even shorter by quite a bit and easier to get into something where max length is a restriction. The Gitzo has a larger diameter though so occupies more volume unless you pack some small items in the gaps between the legs and center column.
    What surprised me most about your review is that you don't compare stability at all. To me (often using tele lenses) stability is important and it would have been super interesting with a test of stability. Particularly since the Ulanzi is significantly lighter which might (or might not) influence stability.

  • @YoungBlaze
    @YoungBlaze 2 года назад

    Need information on a handle to pan

  • @Team974
    @Team974 2 года назад +1

    It’s an Allan key plus the top is flat head so 3 tools, I personally love that peak has that plus the koi lens holder. I do video mostly though and always wanted a better smoother panning method that the Ulanzi has. The articulation wasn’t the issue for me, the fact that opening the wheel makes the peak move all directions but the ulanzi lets you pan only is a big win.

  • @serena-yu
    @serena-yu 2 года назад +5

    9:15 There's another big advantage with a screw-in head clip. For people who use telephoto lenses, it's pretty common to replace the lens foot with an arca-swiss compatible version, and some newer lenses have an arca-swiss foot built in, like the new Tamron 50-400mm f4.5-6.3. Then the problem comes: with the peak design tripod head, the lens foot would be way too long to fit in, whereas a screw-in head clip can well take a lens foot of virtually any length. For me, that was a deal breaker since I have 3 telephoto lenses.

    • @rubenb263
      @rubenb263 2 года назад +1

      I'm able to fit my 70-200 and 150-600 tamron on my PD head and I just loosen the foot and I can go vertical no problem, on time I run in to a problem going vertical is when I attach the camera it's self to the ball head

    • @serena-yu
      @serena-yu 2 года назад

      @@rubenb263 I mean replacing the entire lens foot with an "arca-swiss compatible lens foot", not attaching a loading plate under the lens foot. Attaching a loading plate is not as stable.

  • @zZola_Photography
    @zZola_Photography 2 года назад +7

    The really big one in the ballhead comparison which u didn't mention was that the Ulanzi tripod can tilt about 15 degrees without extending the center column at all... where as if you want a slight tilt on the PD tripod you HAVE to start extending the center column. That was a big selling pt for me as I prefer to use the center column as little as possible. Also I'm not sure whether the PD does but also the fact that the Ulanzi center column can be removed and flipped to hang the camera below the tripod is really cool and something I was looking for that my other tripods can not do.

    • @nigelpong143
      @nigelpong143 Год назад +2

      PD does as well

    • @DavidManningvlog
      @DavidManningvlog  Год назад +2

      Nope Nigel, on the PD, you need to raise the center column slightly before you can tilt 👍

  • @shaunaaron
    @shaunaaron 2 года назад +2

    New F38 version of this has a quick release plate integrated into the tri pod head. And in traditional Ulanzi fasion if you own this older version you can buy the new F38 head for it and swap them.

  • @teamsaunz
    @teamsaunz 2 года назад +5

    I have been subscribed for about 2 to 2.5 years and watched all your videos in that time and I don’t ever remember you being so pro on a comparison video. Usually you say the pros and cons and say what would work best for certain types of videography/photography and leave it up to the viewer. I have an old tripod from like the late 90s that is like metal and quite bulky and heavy…needless to say I rarely use because to travel with it is quite the pain. However, at approximately 25 years it still looks as good as new (I did use it a lot when I first got it). If I were to look into a new one, id probably go for the Ulanzi as well.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +4

      Totally agree with you and I'm usually trying to just lay out the pros and cons. But with this one, I've been using the Peak Design tripod for awhile now and have been so incredibly frustrated with it that I think I was just super stoked to find a replacement that solved almost all of my issues. I felt similarly to the DJI Action 2 when it came out. Just really frustrated with some design choices. I'm super stoked on the Ulanzi and it's been a relief from a lot of frustration🤣

  • @BrandonTalbot
    @BrandonTalbot 2 года назад +5

    Got an affiliate link for this David? The first time I tried to use my phone mount on the PD, it snapped in half when putting my phone in it. PD is super cool, like the company, and I love their bags but man this Tripod has just been a pain in the ass.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      Not an affiliate link, but link in description👍

  • @ulisesgonzalezzuniga7550
    @ulisesgonzalezzuniga7550 2 года назад +2

    Can you remove the ball head and replace it with another on the Ukanzi? Say a fluid head or a telephoto gimbal?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +2

      The Ulanzi ballhead is mounted directly to the center column, but the center column is removable. So in theory, Ulanzi could offer additional style ballheads in the future that would also come with their own center column to slot in. Nothing out yet though

    • @ulisesgonzalezzuniga7550
      @ulisesgonzalezzuniga7550 2 года назад

      @@DavidManningvlog thank you! I do change my ball head quite often for a telephoto gimbal for bird photography. Loving the tripod, though. If they do release a replaceable center column that's an instant buy for me.

  • @catherinesimard5751
    @catherinesimard5751 8 месяцев назад

    Thank you so much for this! The ballhead vertical position problem on the peak design isn't talked about enough and has literally made me miss so many shots while doing big panoramas. A nightmare. Will be buying the Ulanzi

  • @scottw6960
    @scottw6960 2 года назад +1

    Great video! Curious, the pan head… does it allow smooth movements for video like a fluid head? Any resistance to it?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      Pan head is super smooth for video. Only pan though, tilt and roll axis are in the ball head, so not great for video

  • @NT-or9wh
    @NT-or9wh 2 года назад +3

    Love the Ulanzi, only flaw I discovered so far is the level bubble is not accurate. Definitely missed on some quality control there.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      Interesting, I'll have to check that out on mine to see

  • @vonrunner
    @vonrunner 2 года назад +6

    Great review/comparison video! Cheaper than the Peak Design aluminum tripod, but lighter and better than the Peak Design carbon tripod... This makes my travel tripod decision a no brainer!

  • @rbcrist
    @rbcrist 10 месяцев назад +1

    Hello There. What plate are using as I see you switch between the 2 ball heads with the same camera.... I would like to buy an Ulanzi but unfortunately the Peak Design plate that i use because of the shoulder strap holder which i have from PD.... That is the only thing stopping me to order the Ulanzi today.

    • @DavidManningvlog
      @DavidManningvlog  8 месяцев назад +1

      Check my video on the F38 backpack strap that beats the Peak Design version and you'll have a whole system with one plate and all quick release!

  • @clifffawcett
    @clifffawcett 2 года назад +6

    At the risk of seeming to miss the point of this video (which is obviously that the Ulanzi tripod is SWEET) I must say, I love the old school label maker. It reminds me of the one my parents had when I was a kid 👍🏻

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      Dude, it's the best and I want to label everything! I might be going a little overboard around here🤣

  • @alainmenoxfotografo8207
    @alainmenoxfotografo8207 Год назад +1

    Hi. I really enjoyed your video and I´ll probably buy and Ulanzi one. I have one question. I use the Peak Design plates on my camera all the time, I notice that your camera have one too and you can fit it on the Ulanzi head. It's that correct? the Peak Design plate can be use on the Ulanzi tripod?

    • @DavidManningvlog
      @DavidManningvlog  Год назад

      Sort of! Normally, the plates are not cross compatible with each other's quick release systems. BUT, Ulanzi makes a plate that's both F38 in one direction and Peak Design in the other. So with the one plate, I can slide it into the Peak Design capture clip and the F38 tripod👍

  • @davecurtis8833
    @davecurtis8833 Год назад +7

    Great review. One spec addition - the PD has a much greater payload according to their spec sheet. 9kg vs 5kg

    • @jonesbbq307
      @jonesbbq307 11 месяцев назад +1

      it says on their website that Ulanzi supports max of 18kg

  • @carlosr.2027
    @carlosr.2027 6 месяцев назад

    Which model was recommended in this video the ulanzi zero f38 or zero Y

  • @LisaOsta
    @LisaOsta 2 года назад +48

    The Ulanzi & Coman is better mostly because the head. I prefer the mini leveling head of the Ulanzi to the very odd Peak Design one that you have to raise to tilt. I’ve had my Ulanzi about a month and used it often on a recent trip to Iceland. My only complaint on the Ulanzi is that I lost the hook to hang weight from but I never had a chance to use it. I’ve also had the the Peak Design since early 2020 and I hardly use it. So I agree with your comments.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +4

      So awesome to hear you got to use it on a trip like that! The ballhead is for sure the main reason I made the switch. I wonder if Ulanzi offers the hook sold separately. Might be handy to have an extra around here too!

    • @k.o.t.o.n.
      @k.o.t.o.n. 2 года назад +1

      @@DavidManningvlog So on the website, once it says, it can hold 3kg, than 5kg, which is true? Can i use it with nikon z9, sony e mount converter, 1.4 cony teleconverter, an sony 200-600 g, and rode videomic pro plus on top of it? It's right in the middle just under 4kg all in all. :)

    • @HokkaidoSan
      @HokkaidoSan 2 года назад

      The head and the price

  • @ZVEnvy
    @ZVEnvy 2 года назад

    I don't like that the plate that comes with the head has to be screwed onto the camera with a coin or hex key. Could that plate be replaced with one that has a D-ring to easily had screw it onto the camera body? Or is the plate unique to Ulanzi and cannot be substituted? If there is a plate that can be substituted with one that has a D-ring, could someone provide a link where I could purchase one? Thank you.

  • @DevRel1
    @DevRel1 Год назад +2

    Bought the Ulanzi using your code, BTW I got the mobile mount as a gift for free (I was purchasing this to use with my iPhone so that's great) also they gave me a $40 Ulanzi L2 Cute Lite Waterproof LED Light 2172 for free. We'll see how useful that is, but I'm stoked with my 2 free gifts, lighter tripod, more versatile and way cheaper than the Peak Design which I was about to purchase for almost $300 more...

  • @JosephHawkins
    @JosephHawkins 2 года назад +2

    I agree the ulanzi is better- Plus you missed two extra features 1. With the center column all the way down the ball head will still move a small amount - making it more stable without raising the center column, 2. There is a 1/4 screw on the side of the head assemble that you can screw in a clamp to hold what ever you like - phone for camera control , a light or microphone etc … - THANKS FOR THE REVIEW - ALREDY REPLACED thePeak Design

  • @BillSmithBSartist
    @BillSmithBSartist Год назад

    Very helpful. Thanks! What’s the little round tag hanging from your camera. Some kind of tracker?

    • @BinuKR_KRB
      @BinuKR_KRB 11 месяцев назад

      in case you didn't find out, its Camera Strap/connectors

  • @ZagZagSama
    @ZagZagSama 2 года назад

    Which is more stable? Any comparison pictures of the mirror flap wobble?

  • @GarryBurgess
    @GarryBurgess 2 года назад +1

    I use my smart phone a lot, but those mounts are small and I can carry it another way. I am now sold on the Ulanzi tripod for all the reasons that you have cited here.

  • @npvids
    @npvids Год назад

    I bought this six months back. The F38 plate that attaches to the camera does not stay put because its rubber padding easily peels causing scratches to the camera. I asked Ulanzi to send a previous generation center column but they couldn't instead sent a video head to use with a generic center column.
    I now use "3-Legged Thing AirHed Pro Ballhead" instead.
    IMO they're stable but I don't think it's handling any vibration. maybe because of the size (diameter) of the tube? does anyone experience this problem?

  • @judeemclaughlin7394
    @judeemclaughlin7394 2 года назад +2

    I have been looking for a review on that tripod. Thanks

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      It's crazy how much better the user experience is on the Ulanzi. Especially at almost half the price!

  • @kevinhoctor62
    @kevinhoctor62 2 года назад +4

    I bought this Ulanzi & COMAN as soon as it hit the market and I LOVE it. Years ago, I owned a cheap tripod with the flip latches, which made me hate them. But after owning a better tripod with spin locks and comparing it to the Ulanzi flip latches, the flip latches are so much faster and more secure. Brilliant head design, especially being able to tilt it without having to raise it. I'm so glad I spent the money on this one. I also added PGYTECH SnapLock Plate Adapter to all my tripods so I can switch quickly between my PGYTECH Mantispod Pro and the rest.

    • @williamcarter6374
      @williamcarter6374 2 года назад

      Kevin, where did you purchase it? The Ulanzi website now says it can't be shipped to the U.S., Canada or Mexico

    • @kevinhoctor62
      @kevinhoctor62 2 года назад

      @@williamcarter6374 I bought it on the Ulanzi website, but it's been replaced by the newer model with the F38 quick latch system.

    • @williamcarter6374
      @williamcarter6374 2 года назад

      @@kevinhoctor62 Thanks Kevin. That's unfortunate since the new quick release doesn't look to be arca compatible and I use a Kirk L bracket.

    • @diamondly6250
      @diamondly6250 2 года назад

      @@williamcarter6374 i just got it on amazon im in the u s

    • @camadamedia6728
      @camadamedia6728 8 месяцев назад +1

      Hello ! Are you still happy with the Ulanzy Tripod? I want it ! TK

  • @rachelhusband9890
    @rachelhusband9890 Год назад

    Hi. Is this the 'Ulanzi Zero Y Lightweight Travel Tripod' model? Just followed your link and it then says kit 1, kit 2, all the way up to kit 5, though not showing what the kits are, which is weird. Thanks.

  • @KevinMullett
    @KevinMullett 2 года назад +18

    Very thoughtful comparison, particularly because you've used the PD one for so long. I wish Ulanzi would have implemented a lever arca plate retention design like the Colorado Tripod Company has, which I absolutely prefer now over screw in type. And, it would have fit/made sense given they are already using levers for other parts. Still might look at this for travel.

    • @NikhilShahi
      @NikhilShahi 2 года назад

      The Colorado Tripod Company ball-head is excellent. It is my goto travel combo (coupled with the Sirui AM 284).

    • @DevRel1
      @DevRel1 Год назад +1

      Wait can't you get something similar with ulanzi (you have to add the ballhead to the order) please correct me if I'm wrong.

  • @markkempton4579
    @markkempton4579 2 года назад +1

    Confusing specs. I need to be able to hold my 400 2.8 with a pro body, so I reviewed the max load details. The center column holds 18kg, but the ballhead only supports 5kg. It does not appear to have a replaceable ball head, so what's the point of a center column that can hold more? Also, what do the legs hold and why do they not show that? I love the look of this thing, but seems fishy. . .

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      The weight capacity of both is almost the exact same. I saw the same thing on the specs sheet and thought it was confusing, but realized that Peak Design wasn't super transparent on their specs. They say the tripod can hold 20lbs, but that's with the center column all the way down and just using the legs to hold the weight. They don't have a spec for if the center column is up, or if the ballhead is at an angle. For a 400 2.8, I think you would have no problem on either tripod, but might feel a little unstable if you have either ballhead in the vertical position

    • @KarenVaisman1
      @KarenVaisman1 2 года назад

      Could this tripod hold a pro body and long lens? Nikon z9 an 100-400?

  • @ChristineTabor
    @ChristineTabor Год назад

    is there a specific Ulanzi model for travel version? What is the difference between the Zero F38 and the Zero Y?

  • @ken830
    @ken830 2 года назад +3

    One thing I wish someone would test is load capacity and stability, which is the primary function of a tripod. I have the PD CF tripod, but would like another and I use these things everyday here at home and when I go out, so it does need to support heavier equipment.
    You shouldn't tighten the lock lever so much on the PD head... There's no risk of the camera falling out... you just need to get it to the locked position to take out the little bit of slack and to prevent accidentally hitting the release lever. For the tool, I agree it falls out easily when traveling, but the fix (and PD should do this officially) is to attach a hair-tie (or a durable rubber band) around the tool's eyelet, insert the tool into the holder and loop the hair-tie around the other end of the tool. Problem 100% solved.

    • @FlyinRyanProductions406
      @FlyinRyanProductions406 2 года назад +1

      Good call with the tool, thanks. I been using the PD CF for real estate since 2020 and never once was bothered by the ball head locking mech 🤷🏻‍♂️

    • @ken830
      @ken830 2 года назад +2

      @@FlyinRyanProductions406 Exactly. I also like to insert my camera "reverse" with the release tab facing the lens (away from me). That way, the camera won't fall even if I accidentally press the release lever.
      There are so few quick release receivers out there that allow you to snap-in your camera with one hand and have no risk of it falling to the ground before tightening. 99.999% of the "normal" cheap (and not-so-cheap) QR receivers require you to hold onto your gear while you place it in and tighten it down. I only know of this Peak Design Tripod head and the Kessler Kwik Release Receiver that do this and are Arca Swiss compatible.

    • @FlyinRyanProductions406
      @FlyinRyanProductions406 2 года назад +1

      @@ken830 man I jest did the hair tie trick for my tool and it works perfectly! That was really my only complaint. Great call with that!

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      The load capacity is a tricky thing to test with tripods, but both are rated to over 20lbs, which is far more than I'll ever put on there. Where it gets tricky though is that load capacity from the manufacturer is always based on having the center column all the way down, so really you're just saying that the legs can hold 20lbs. But what about if you have the center column up? What if you have the ballhead at a slight angle? What if you're shooting vertical? There's a bunch of situations that change load capacity, but from my use with both of these, they both feel like they can handle about the same load.
      The hair tie trick sounds solid, just feel like I shouldn't need to do any tricks for $650🤷‍♂️ If you're looking for a second tripod, I would say go for the Ulanzi and save quite a bit of money. You might even find that your Peak Design ends up a bit dusty sitting at your studio

    • @ken830
      @ken830 2 года назад +3

      ​@@DavidManningvlog I understand it's tricky, but being in the position of having both tripods and having a large audience here, doing exactly those kinds of tests would benefit a large number of people (your audience) and save them money.

  • @imboredDB
    @imboredDB Год назад

    HI, I own a DJI Action 4 and am looking to buy a fupl size Sony mirrorless camera. My goal is to purchase one tripod for both that raise to 60 inches ( give or take); any such thing?😮 Thx!

  • @XtophergeorgeX
    @XtophergeorgeX 11 месяцев назад

    from the ulanzi link, it looks like there's a few options when buying--first seems to not have middle bar??

  • @justinblacktravels
    @justinblacktravels 2 года назад +1

    Will the Peak Design base plate fit on the Ulanzi? Guessing not but thought I would ask if you still have both.... I love the PD capture clip for hiking, so if I get the Ulanzi it would be an extra step to have to switch base plates when I need to use the tripod.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      There's two versions of the Ulanzi, the F38 Quick Release and the Arca Swiss plate version. The Peak Design plates will fit the Arca Swiss plate version, but not the F38 version. BUT, Ulanzi makes a plate that fits both the F38 Quick Release system AND the Peak Design quick release sytem👍

    • @justinblacktravels
      @justinblacktravels 2 года назад

      @@DavidManningvlog Thank you! That's great! appreciate you taking the time to answer.

  • @petermorgan4720
    @petermorgan4720 Год назад

    Loved the video, David. Could you have a look at the new kid on the block - namely, Neewer? They seem to be coming out with some interesting stuff (the TP65 is the one Im really interested in), but I've seen no-one do any reviews yet. My travel tripod is a CF Manfrotto whilst my larger one is Gitzo. 😉

  • @never_arrive
    @never_arrive 2 года назад +43

    Great review! I think one thing to mention though is that the PD tripod has a load capacity of 40lbs, whereas the Ulanzi is only rated for 13lbs (that is the ballhead max load which cannot be removed).

    • @XxXSEPIOXxX
      @XxXSEPIOXxX Год назад +2

      It looks like the ball head can also be removed? Maybe you're saying there's no alternatives directly?

    • @eddy.alexandru
      @eddy.alexandru Год назад +4

      13 lbs is more than enough for me if I can save $300

    • @capntonydanza
      @capntonydanza Год назад +2

      I shoot sony cameras and they around 2lbs with out a lense. So less than 3lbs with a lense. Unless Youre using some kinda crazy lense I can’t see you needing more than 13lbs.

    • @navireljan1857
      @navireljan1857 11 месяцев назад +1

      40lbs is not realistic on that size and who will trust 40lbs equipment to put on that tripod. That's a silly specs.

    • @iDealMedley
      @iDealMedley 11 месяцев назад +1

      It's a travel tripod you're not gonna load a cine rig on it lol

  • @elinamakeva2270
    @elinamakeva2270 7 месяцев назад

    What about this tripod for the sony 100-400mm gm? Is that work?

  • @michaelkoppenhoefer5910
    @michaelkoppenhoefer5910 2 года назад +2

    I have the pd carbon I love it and I use and abuse it. I have broken parts on it and peak design has sent out new parts free. They have a warranty that you can trust.

  • @elgab8714
    @elgab8714 2 года назад

    Please check the carbon fiber (CF) tubes on the Ulanzi tripod you have. The one I returned appears to have been made from a CF sheet rolled into a tube. There is a distinct line that runs from top to bottom that appears like a seam where the ends are fused together. Structurally, to me this won't be as strong as one continuous weave that I'm familiar with on tripods and monopods I have. I won't be confident to use it with thousands of dollars worth of camera and equipment.

  • @LadyFireHorse
    @LadyFireHorse 2 месяца назад +1

    Would you still recommend the Ulanzi today (2024 for future vid watchers) or did you find another tripod that surpasses this one? I'm looking for a lightweight travel (shorter the better) tripod for a pachade/easel for watercolour painting and I know there are cheaper tripods out there but I would rather invest in something that will last. Thanks.

    • @DavidManningvlog
      @DavidManningvlog  2 месяца назад +1

      The only tripod I now like more, even though I still use my Ulanzi F38 a ton, is the Falcam TreeRoot tripod. I’ve got another video walking through that tripod on the channel ruclips.net/video/JwGDurnRPM4/видео.htmlsi=TQygJw0YvXjzvNu4

    • @LadyFireHorse
      @LadyFireHorse 2 месяца назад

      @@DavidManningvlog thank you!

  • @PBlaik
    @PBlaik Год назад

    The Ulanzi seems great, but that single screw type clamp/plate retention seems to be a weak point, vs the two step lock of the PD. No fears of the camera getting loose especially in the vertical position on the Ulanzi?

    • @DavidManningvlog
      @DavidManningvlog  Год назад

      The single step button can also be rotated into a locked position. Just clicking it in fully locks it in place, but if you want to prevent any accidental button presses that would release your camera, you just rotate the button to lock it👍

  • @GeoRides114
    @GeoRides114 Месяц назад

    Love your videos, very informational and entertaining. Keep up the good work! This is going to be my next tripod at the right price!

  • @vettepwr23
    @vettepwr23 Год назад +3

    I don't prefer the lock on the Peak Design for securing your camera but it has a purpose especially for those who carry their camera on their tripod. You don't want your camera to fall off when during transport.

    • @vgtgoat
      @vgtgoat 11 месяцев назад

      Don't many arca swiss have safety pins if the arca latch fails? The PD plate doesn't have it which does scare me when using it with other arca mounts.

  • @MichaelFord15
    @MichaelFord15 Год назад

    Love your content and advise! I tried the Ulanzi link and it doesn’t pull up anything. Can you look and share which one it is from their site?

  • @minutemanprep
    @minutemanprep 9 месяцев назад +1

    Incredibly helpful. Thanks!

  • @earonsotto9908
    @earonsotto9908 2 года назад

    Are the center columns interchangeable? I already own the Peak Design CF tripod. It would be great if I could purchase just the Ulanzi center column with its ballhead and fit it into the Peak Design legs.

  • @stephaniesoltau2485
    @stephaniesoltau2485 2 года назад

    Thanks for the great review! Do you use this tripod for both film and photography? Looking for an all in one tripod solution to take personal family films and photos :). Is it necessary to have both a ball head and fluid head mount or is this set up enough? Thx!

  • @HK-NYC
    @HK-NYC 2 года назад +1

    Does both work with my Really Right Stuff plates?

  • @simplemindedperson
    @simplemindedperson Год назад +1

    Wonderful review. What is the label maker you are using here :)

  • @ianbrierley5671
    @ianbrierley5671 10 месяцев назад +1

    fantastic honest review and packed with great advice. I would make it clear that there is an F38 travel tripod model which is non arca swiss compatible that looks identical in all other aspects apart from the ball head design and this would be a huge mistake for anyone with l brackets or arca swiss plates as they will not fit. The Zero Y travel tripod is the one to go for!

    • @DavidManningvlog
      @DavidManningvlog  8 месяцев назад

      Nice addition, thanks for the comment! Now they have and Arca Swiss option, an F38 option, and a base option that lets you mount your own ballhead👍

  • @hectorgarcia9783
    @hectorgarcia9783 10 месяцев назад

    Is there a way to mount a fluidhead for videography on a longer lens?

  • @unknownKnownunknowns
    @unknownKnownunknowns 2 года назад

    Hey very interesting. Do you happen to know of a reliable panning head that I can pop on my PD? I am annoyed by the lack of true panning w/the PD. ( PS- I'm keeping my PD because I love buying American to support living wages, health benefits, retirement, and not a factory worker camp.
    Thanks.

  • @japrtorres
    @japrtorres Год назад

    Needed this in upgrading my 6 year old Zomei tripod. Thanks for the insights! After a year from publishing, have you had a better tripod than Ulanzi?

  • @racers-sw1og
    @racers-sw1og 3 месяца назад

    Thanks so much for the review. I went with Ulanzi tripod after trying the peak design😁

  • @צִלם-ג7ק
    @צִלם-ג7ק 2 года назад +2

    It's amazing, you can save so much money if you only cut R&D for "inspiration" (not to mention fair payment for production employees...)

  • @Chuck8541
    @Chuck8541 2 года назад +31

    Imagine the audacity you have to charge 700 bucks for a tripod, AND THEN AN ADDITIONAL 35 bucks for ground spikes? Geezus.
    I bought an overpriced camera bag from them, but really…it was a waste of money. So many bags compete with it easily.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +3

      I'm for sure with you Chuck that $650 for a tripod is wildly overpriced👍

  • @jdjr3640
    @jdjr3640 Год назад +1

    Great video! Where can I get that label maker!?

  • @richardmendoza4389
    @richardmendoza4389 Год назад

    Has anyone used the PD universal adapter to swap out & use a different brand ballhead/tripod head on the the travel tripod? Just curious.

  • @iandavis1355
    @iandavis1355 2 года назад

    Weight is important particularly if you are back country hiking or canoeing/portaging. Have you used both tripods in sub-freezing conditions?

  • @garyhill5377
    @garyhill5377 2 года назад

    Does the head remove to add a fluid head for video the way the peak system does, if so do you have a preference from experience..good review…edit it appears from another comment that the head cannot be removed?

  • @nrice3623
    @nrice3623 Год назад

    Just learned about this tripod when it popped up on my IG feed. I don't need a new tripod right now, but the size and weight of this are super tempting! Thanks for the detailed review.

  • @RobertSE6
    @RobertSE6 Год назад

    Very true about the allen key/holder coming off - but PD replaced mine free of charge when I lost it. Still like the PD one but agree about the ball head.

  • @southpaww
    @southpaww 2 года назад +3

    Good to know! I don’t have the best eyes so i hate a tripod with any wobble while trying to manual focus. For the price, The wobble i saw in the PD tripod was just unacceptable. It’s priced for its cleverness and the R&D they put into it, not its actual worth of utility, in my opinion. But for 330 and change after their 10% coupon…. This is much, much more acceptable!

  • @CurtisWarnasch
    @CurtisWarnasch 7 месяцев назад

    Hey there David. I'm going the be filming so auto racing and i'm looking for a tripod that i can spin 180º. My current Manfrotto tripod is 3 feet at the base when fully open causing a trip hazard. Any suggestions for me. Thanks Curt (CWV)

  • @Backstagebayarea
    @Backstagebayarea 2 года назад +1

    I returned my PD tripod over the same issues. I'm looking at the IFOOTAGE Carbon Fiber Travel Tripod $349. Your thoughts on this one?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      That's a tough call, iFootage makes some awesome products and I use an iFootage tripod as my main legs in studio. For travel tripods though, I would still go with the Ulanzi. The iFootage is almost 21" vs Ulan's 16" or so and that doesn't include a ballhead on the iFootage. I haven't used it though, but I would guess that the iFootage would feel a lot sturdier, but that the Ulanzi is lighter, smaller, faster to setup and use👍

  • @sbai4319
    @sbai4319 2 года назад +1

    I have a classic 3 LT Brian. More than three sections makes for wobbly legs.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      I think that depends on the quality of the locking mechanism👍

  • @pll66
    @pll66 Год назад +4

    Great review and fair assessment of both - hats off too for going against Peak Design that can be akin to bristling the likes of the Apple fanbase:). Was in the tripod hunt for a trip coming up and this stopped me in my tracks just before pulling the pin on the PD. Thanks!

  • @KarenVaisman1
    @KarenVaisman1 2 года назад

    Great review! The legs click out far but with center column how can you get low to the ground for macro?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      Multiple ways. The center column comes apart in two pieces, so that helps you get lower, or you can invert the center column so your camera is upside down and you can basically get your camera almost completely on the ground!

  • @g_w_j_l
    @g_w_j_l 2 года назад

    Can you do video with this? I dont really see an easy way to grip it for pans and tilts

  • @timjones5817
    @timjones5817 Год назад +1

    The intent us a travel tripod and some reasonable inconveniences should be accommodated. Also, PD is an American company and they add a lot of value in this space. I will buy PD, thanks for the excellent review.

  • @NoahStephens
    @NoahStephens 2 года назад

    Try locking it facing the opposite way. That said, you’re absolutely right about the lack of vertical adjustment on the Peak. That disappointed the shit out of me

  • @KarenVaisman1
    @KarenVaisman1 2 года назад

    If you wanted to shoot video could you swap out the head for a small video head? (Saw a small rod video head) thanks!

  • @davidsmithson9236
    @davidsmithson9236 2 года назад

    I’ve been looking for a label-maker like the one you used. What make/model is it? Thank you.

  • @gianniawiequaunegv2016
    @gianniawiequaunegv2016 2 года назад +2

    I love the peak design except for the ball head for panos. I lost my tool the very first time I took it out of the bag in the wild. Didn't even notice it was gone until I got home. I like how the ulanzi head is much better for shooting panos with and for portraits. Peak design lacks there as well.

  • @JAaronMattox
    @JAaronMattox 2 года назад

    Is it possible to unscrew the Ulanzi ball head and use a different type of head?

  • @winc06
    @winc06 2 года назад

    What a great user experience review. Thanks. Is that a regional accent I hear? Where are you from?

  • @nuclear64_
    @nuclear64_ 2 года назад +1

    Brother, this is a fantastic video. Thank you so much. Cheers from LA, Frank.

  • @newtonianinter8625
    @newtonianinter8625 2 года назад +1

    Thank you for the video! Great review! I owned a PD Alu tripod for a while, I agree about the ball head, it is quite frustrating. I also have problem when I finished setting up the frame and tightened the ball head ring, the frame tents to shift a little.
    After I watched your review, I notice how small of Ulanzi legs. So I jump right away to Ulanzi website to find out the load capacity.
    For PD tripod, they claim 9.1KG load. And I never have even I used 100-400 attached on FF mirrorless. I wonder Ulanzi’s max. load capacity ballhead @ 5KG and center column @ 18KG. I am not sure which capacity load is the one that I should be considered. Do you think the Ulanzi can handle such a huge zoom lens?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      The load capacities are almost identical between the two tripods. The Peak Design load capacity is only referring to how much the legs can hold. So ballhead and center column down, the Peak Design can hold 18Kg. So they just don't say that if the center column is up or if the ballhead is at any sort of angle, what the load capacity is. But they're about the same between the two, so you're good to go with a 100-400 on either one👍

    • @newtonianinter8625
      @newtonianinter8625 2 года назад

      @@DavidManningvlog Thank you

  • @TheArrogan
    @TheArrogan 2 года назад +1

    Hi David, did you notice Ulanzi's one year warranty, which is worrisome. Even SIRUI provides 6-year warranty. Do you think if this would be a problem?

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      Ya know, in 14 years of shooting, I’ve never needed to use a tripod warranty. I think if you see that something is built well, you’re usually good to go and the warranty is mostly marketing talk

    • @TheArrogan
      @TheArrogan 2 года назад +1

      @@DavidManningvlog I rarely use warranty either. But this is a young company, that's why I was a bit more cautious. If they are confident with their product, why not just give a 5-year warranty. I think I'm a bit paranoid :)

    • @commonsense5709
      @commonsense5709 Год назад

      @@TheArrogan I totally agree. $360 for a Chinese made tripod is a lot of money when you check out Amazon selling Chinese tripods for a lot cheaper even carbon fiber ones for under $40 shipped.

    • @commonsense5709
      @commonsense5709 Год назад

      @@TheArrogan It's also why I personally prefer non Chinese made items such as Manfrotto Italy.

  • @birit911
    @birit911 2 года назад +2

    BTW the Ulanzi tripod comes with a free arca swiss mobile phone holder which came in the box when I ordered mine from Ulanzi

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      What the whaaaat?! Mine did not come with that🤷‍♂️

  • @shupingyin8082
    @shupingyin8082 Год назад +1

    Thanks for your review. I think I’m going to buy one?

  • @BoomixDe
    @BoomixDe 2 года назад

    I'm using the Ulanzi Falcam F38 Quick release on all my gear.
    They even offer Gimbal plantes with build in F38 Quick releases

    • @patrickgilmour1221
      @patrickgilmour1221 2 года назад

      the falcam f38 is flawed, the base comes lose too easily, one bump and it loosens.

  • @StephenLinhart
    @StephenLinhart 2 года назад

    The one thing missing is putting a heavy camera on each and shaking the camera to give a visual comparison of stability in practice rather than perceived stability from guessing based on the legs.

  • @LesterLaVonne
    @LesterLaVonne Год назад

    Thank David you got me sold! I used your code and saved 70$ on my purchase!

  • @markkasick
    @markkasick 4 месяца назад

    Other than the head what's the difference between the Ulanzi and any number of other tripods that would be possibly even less expensive?

  • @MauriceMercado
    @MauriceMercado 2 года назад +2

    I almost bought the Peak Design tripod when it was announced. Glad I did not. I have a Vanguard Carbon Fiber Travel Tripod that has worked great but that Ulanzi look fresh man.....very tempting.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      I'm stoked you didn't Maurice! The Ulanzi is for sure the way to go when it does come time for you to pick up some new legs👍

    • @MauriceMercado
      @MauriceMercado 2 года назад +1

      @@DavidManningvlog Mos Def!!! So pumped you're about to hit 300k, thats amazing. Blessings bro.

  • @magicalblossommusic
    @magicalblossommusic Год назад

    You are not boring to watch & I loved the informational video. Thanks! New Subscriber 🎉

  • @BigOlson
    @BigOlson 2 года назад

    push the tool clip up to near the top, as high as possible with the legs closed. the tool can't come out until you fold the legs out.

  • @TAG_Productions
    @TAG_Productions Год назад

    Does the peak design arca plate work with the unlazi tripod?

    • @btbw3729
      @btbw3729 Год назад +1

      with the F38 system, no

  • @thisiserich
    @thisiserich 2 года назад +1

    I’ve been waiting two weeks for the Ulanzi to get to my house lol. It’s in my town at least. Just needs sorted or something I guess.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      Ahhh, so stoked for you Eric! You're going to love it man. Super simple to use and a really solid tripod!

    • @thisiserich
      @thisiserich 2 года назад

      @@DavidManningvlog I am so glad it has panning. I can’t wait to shoot some video with it!

  • @popeyerubi1981
    @popeyerubi1981 2 года назад +2

    I was looking at the Aluminum Peak Design tripod but since the Ulanzi came out with this at almost the same price as the aluminum one, i think i’ll buy the ulanzi carbon fiber.

    • @DavidManningvlog
      @DavidManningvlog  2 года назад +1

      On ballhead alone, you'll be way more stoked on the Ulanzi!

    • @popeyerubi1981
      @popeyerubi1981 2 года назад

      @@DavidManningvlog yessssir!!

  • @MichaelVash7886
    @MichaelVash7886 2 года назад +1

    Cool video.
    I am looking for a tripod or something that would be a good fit between a desk and a wall. The real trick is it's a sit stand desk. So I don't think most tripods would be a great option as how much room they'd need for the legs while the desk is lowered to sit at

    • @DavidManningvlog
      @DavidManningvlog  2 года назад

      Look for desk clamp light stands. There’s poles that you can mount to your desk and then just add a ball head on top. Then, no matter how short or tall your desk is, the camera follows the height

    • @MichaelVash7886
      @MichaelVash7886 2 года назад

      @@DavidManningvlog thanks will try that. Any ones or ball head your recommend?