Just wanted to say thank you for this technique. Had a couple locks I was having trouble with my sparrows disc pick and didn't think to counter rotate the pick. After seeing your video I finally got them to open! Stay safe Daz
My friend this has made my day, thank you so much I really appreciate it. Disc detainer locks are fantastic fun to pick. You too have a great weekend. 😎👍
Phenomenal info bro. The time and effort you put into this did not go past myself. I thank you for doing the work involved to besting this type of situation. I will never forget it and use it too. Cheers and Happy Pickin!
Thank you so much mate I really appreciate it. Disc detainer locks are so much fun to pick, & I know this little technique will help a lot of people with theses locks. Have a great week. 😎👍
Nice vid, very helpful, thanks! From the look of the bitting on that Abus plus key you could tension that one off disc 8 with a rear tension tool and leave the butterfly on 9 alone, but that wouldn't help most of the time!
Thanx Daz. I was just gifted a DD lock from work that was cut off a bike stand after sitting all winter. Still waiting to get a sparrows pick so I can start with DD locks.
I really hope that sparrows get some more DD picks up on sale soon. They really good tool. You will have a lot of fun picking Disc detainer locks. Have a great week mate .
Nice pick, and nice picking, geez. Trying to pick the exact model lock you have there, but I've no key for it, so it's more than a bit challenging. Knowing it's a 6-disc will help immensely, I reckon.
Nobody Special Thanks mate, I hope this helps, your lock will also have a 0 disc somewhere in the core. It will be the only one that clicks when you return it back to the start position. Have a great week my friend.
Great explanation my friend, very informative. You are really getting into disc detainers. Now you need to manufacture dd picks with your design flair.🤔🍺👍
Don'z Lockz Thanks Don, I’d love to make a really cool DD pick, I just need a lathe, it’s on my to get list, so hopefully I will sort it out soon. Have a great week mate.
Hey Daz, great addition to Lock Noob's video. I'm a noob myself but did notice a big difference in feedback when tensioning from a non tensioning disc. I was able to open the few dd locks i have though. In my case swap front to back disc tension like lpl demonstrates often, before setting disc one. Seems to me pushing the sidebar out one way often still pushes it in slightly on the other side, but i dont have a working transparent or cutaway to verify that. Thanks Daz 👍
Thanks my friend. Lpl is a fantastic resource for information on DD locks, I’ve learnt so much from him. DD are such fun to pick & work out. Have a great week,👍
Super information!!! Great video demonstration!! So one should look for a 0 cut in the mid part of the key for the clue that it tensions from that cut? Think I have got it😅 Thank you for sharing this !!!! Stay safe my friend!! 🐈👍🐈👏🐾😷
Thanks Chris. Absolutely the 0 cut disc mid way through the lock/key will definitely help to know, if your not getting any feedback. Have a great week Chris.
Thanks again for the tip it got me to open my first disc lock the other day but I can only open it once out of every 15 or 20 tries my zero cut I believe is on the third disc and the last three or four I can feel and hear the click the first couple discs is mushy no click so I think that's the only reason it's taking me so many tries is I'm just getting lucky on the first couple discs is it because I'm doing this in the wrong order I'm going linear backward to forward I'm wondering if maybe I should start somewhere like second disc and then first disc or maybe third second and first and maybe then I can get clicks on all of them?
I’m so pleased that this video & technique has helped. Disc locks definitely take a bit of practice to master, they are so much fun to pick open. & to think that it wasn’t that long ago they were considered unpickable. Have a great day my friend.
Very well explained Daz. Very clear information. Am I right in thinking that if you haven't seen the key to know which is the zero cut disk, it's the one that doesn't click when you fully turn it counter clockwise? Then you would just rotate it back fully clockwise?
Thank you Roy, absolutely that exactly how to find it. Plus I’ve always found that the 0 disc drags through the full rotation of the disc. Have a great week Roy.
Thanks mate, I really appreciate it. P.s I’m still can’t get that bloody lock I’ve borrowed of you open. I’m going to have another couple of goes then sent it back.😩 . It tensions from a disc in the middle but with the Classic profile it’s not easy. Have a great week
Daz, is the one you’ve just picked, the same as the identical looking Kryptolock Series 2? Gonna try to make my first DD pick from scratch. Will make the tips on the the milling machine and use some thumb wheels from my stainless 1” 2in1 components. Do you know what the maximum tip thickness needs to be to clear each disc?
The Abus & kryptonite are similar apart from the Abus disc locks generally have false gates, the Kryptonite disc locks generally have slightly thinner discs. Some of the kryptolock cores have a small secondary lever/disc at the bottom of the lock that needs to be moved first. Apart from that the tools require are identical. The picking tips i make are 0.3mm but you can go up to 0.5mm , that’s same as the Sparrows DD pick Did you see my video on how i made my disc detainer pick. Here’s a link. ruclips.net/video/PbAhCvIrFCk/видео.html Any other questions just ask. 👍
Amazing info here thanks a lot !! so when tensioning from a butterfly disc, is it better to use heavy tension or light tension ? I can use this counter rotation technic well on a chinese lock that has a core quite similar to the Kryptonite lock. However, on my Abus 88/40 I seem to have no feedback at all. Maybe it's because of those butterfly disks. Any clue ? What am i doing wrong here ? Thanks man
Hi mate, believe me you are doing nothing wrong, they are pretty tricky locks to pick, the feedback is very subtle until you have all the disc’s in a gate, weather it be false or true. As for the tension you just need a moderate tension. I’ve just brought another Abus plus lock the Abus 89/40, so when it arrives I will do another in-depth video on it, to try & cover all aspects of picking them. I’ll also use the sparrows DD pick.🤞 Have a great weekend.
@@dazevers that would be great, I can't wait for this video you're going to make. Still don't get any feedback at the moment from my Abus 88/40 I don't know why... Still trying to figure it out.
very interesting, i havent messed about to much with these locks , so would you need 3 differnt tools for top bottom and middle tension ? i see sparrows now to do top tension tools but never seen the other 2 types for sale ,
great video. As I also wrote in comment to lock noob. LPL does this trick so often, but never explain it in details for the beginners to understand the trick.
Very nice explained both before and during the picking. It was a pleasure watching! 👍
Thank you so much mate, I really appreciate it. 😊
Man your videos are priceless for anyone learning to pick or make tools for disc locks... Explained well and all ground covered... Thanks
You are the most underrated lock pick channel on RUclips. I don’t get why you don’t have a million subs. The information you share is great.
😊 thank you so much my friend I really appreciate it. 👍 Have a great week.
Just wanted to say thank you for this technique. Had a couple locks I was having trouble with my sparrows disc pick and didn't think to counter rotate the pick. After seeing your video I finally got them to open! Stay safe Daz
My friend this has made my day, thank you so much I really appreciate it. Disc detainer locks are fantastic fun to pick. You too have a great weekend. 😎👍
@@dazevers glad it did, you made mine after seeing that technique and finally getting those two locks picked. Have a great weekend too my friend
You make this look easy, there’s real professionalism on show here
Thank you Roger, I really appreciate it. Have a great week.
Daz I am saving this one. Thank you for the most helpful information. Take care and keep on picking, and helping us DD learners out.
Thank you so much I’m really pleased it will help. You to have a great week.
Daz the Disc Detainer Destroyer! 🤣
Awesome work and great info there as to how to pick these locks! 😁🥚
Lol I like that the “DD Destroyer”
Cheers mate, Have a great week
Super video Daz!
Your the Disc man for sure.
Thanks for sharing this valuable information. 👍👍👍👍🧡
Thank you so much Cherokee I really appreciate it. Hope you are well. Have a great week.
Good job Daz, this is why Abus can be tricky also because of the butterfly discs. Keep up the good work
Albert Lebel Absolutely they are really tricky locks to pick, but as you know so rewarding when you get them open. Have a good one mate. 👍
A fantastic explanation Daz.
You make it look so easy. 👍👍
Thanks Wez, I really hope it helps. DD locks are so much fun to pick. Have a great week mate. 👍
Phenomenal info bro. The time and effort you put into this did not go past myself. I thank you for doing the work involved to besting this type of situation. I will never forget it and use it too.
Cheers and Happy Pickin!
Thank you so much mate I really appreciate it. Disc detainer locks are so much fun to pick, & I know this little technique will help a lot of people with theses locks. Have a great week. 😎👍
Nice vid, very helpful, thanks! From the look of the bitting on that Abus plus key you could tension that one off disc 8 with a rear tension tool and leave the butterfly on 9 alone, but that wouldn't help most of the time!
Hi Cris
That is right with this particular padlock. But once you can master this technique you can open every Abus plus core. 😎👍
Awesome video with some great tips!! Thank you for sharing!! Happy pickings!!
Thanks Daz! That’s some good info. I can definitely use it.
Thanks Fried I hope it helps, have a great week.
Thanx Daz. I was just gifted a DD lock from work that was cut off a bike stand after sitting all winter. Still waiting to get a sparrows pick so I can start with DD locks.
I really hope that sparrows get some more DD picks up on sale soon. They really good tool. You will have a lot of fun picking Disc detainer locks. Have a great week mate .
@@dazevers Sparrows is now telling me mud June. COVID-19 has disrupted supply chain for parts.
Cracking bit of advice shared with everyone there! Expertly shown aswell! 😯😎😎 Great stuff
Thanks Matt. I hope it helps as these DD locks are just so much fun to pick. Everyone should have ago. 😊👍
Very informative Daz👨🎓
Thanks for sharing your knowledge.
All the best mate 😁
Thank you so much Harry I really hope it helps. Have a great week. 👍
Nice pick, and nice picking, geez. Trying to pick the exact model lock you have there, but I've no key for it, so it's more than a bit challenging. Knowing it's a 6-disc will help immensely, I reckon.
Nobody Special Thanks mate, I hope this helps, your lock will also have a 0 disc somewhere in the core. It will be the only one that clicks when you return it back to the start position. Have a great week my friend.
Great video---- not seen the turning the lock idear before
Thanks my friend I really appreciate it. Disc detainer locks are so much fun to pick.
Have a great week mate.
I don't understand the language, but the video is very interesting. This model where the tensor leads, forward or backward. 😘😘 A greeting from Italy 💪
Thank you for stopping by I really appreciate it. I too watch video’s I different languages
Have a great week. 😎👍
Great video mate nice technique 👏👏
Thanks you mate, I hope it helps .👍
fantastic video Daz my friend have a great week👍👊😊🇬🇧😎
Leon's lockpad Thanks Leon, I hope this video helps. Disc Detainer locks are fantastic fun to open. You too have a fantastic week mate.
Nice to see you, Daz! DD are not common around here, but it's a pleasure know about them.
And that was fast...
Be safe!
Thank you so much my friend. You too have a great week. 😎👍
Thank you for the information! Great video, have a nice week.
Thanks Keymaster my friend. I find these locks fascinating, & great to work out & pick, you too have a great week.
Nicely explained there Daz, have a great week my friend.
Thanks Mate I really appreciate it. You to have a great week.
Great explanation my friend, very informative. You are really getting into disc detainers. Now you need to manufacture dd picks with your design flair.🤔🍺👍
Don'z Lockz Thanks Don, I’d love to make a really cool DD pick, I just need a lathe, it’s on my to get list, so hopefully I will sort it out soon.
Have a great week mate.
Really interesting, Im not on DD locks yet, but knowledge is power. Thanks for sharing 👍😀🔓
Thank you so much mate, they really are fantastic locks to pick. Have a fantastic week.
great informative techniques taught/shared thank you👍👍👍👍👍🔑🔐🔒🔓
Thanks mate I hope it helps, have a great week. 👍
@@dazevers any bit of tutorial will help me and others 👍👍👍👍👍🔑🔐🔒🔓
Hey Daz, great addition to Lock Noob's video. I'm a noob myself but did notice a big difference in feedback when tensioning from a non tensioning disc. I was able to open the few dd locks i have though. In my case swap front to back disc tension like lpl demonstrates often, before setting disc one. Seems to me pushing the sidebar out one way often still pushes it in slightly on the other side, but i dont have a working transparent or cutaway to verify that. Thanks Daz 👍
Thanks my friend. Lpl is a fantastic resource for information on DD locks, I’ve learnt so much from him.
DD are such fun to pick & work out.
Have a great week,👍
I am now starting with DD, very good explanation, thank you.
Don't you have it as a PDF ;-)
Nice Video Daz 👍👍👍
Thanks my friend. 👍
Super information!!!
Great video demonstration!!
So one should look for a 0 cut in the mid part of the key for the clue that it tensions from that cut? Think I have got it😅
Thank you for sharing this !!!!
Stay safe my friend!!
🐈👍🐈👏🐾😷
Thanks Chris. Absolutely the 0 cut disc mid way through the lock/key will definitely help to know, if your not getting any feedback.
Have a great week Chris.
Daz Evers great!! Thank you!!
😷🐾🐈👍😷
such fantastic information within this video.
Thanks I really hope it helps everyone over come those tricky locks that need to be tension from a Random disc. 😎👍
Thanks again for the tip it got me to open my first disc lock the other day but I can only open it once out of every 15 or 20 tries my zero cut I believe is on the third disc and the last three or four I can feel and hear the click the first couple discs is mushy no click so I think that's the only reason it's taking me so many tries is I'm just getting lucky on the first couple discs is it because I'm doing this in the wrong order I'm going linear backward to forward I'm wondering if maybe I should start somewhere like second disc and then first disc or maybe third second and first and maybe then I can get clicks on all of them?
I’m so pleased that this video & technique has helped. Disc locks definitely take a bit of practice to master, they are so much fun to pick open. & to think that it wasn’t that long ago they were considered unpickable.
Have a great day my friend.
Awesome video! Thanks for sharing.
Lock Picking Coal Miner Thank you so much my friend, I really appreciate it. Have a fantastic week.
Great info for beginners like me, thank you for sharing ;o))
Thank you, I hope it helps, Have a great week.
Great video! really informative and clear ...
Thanks mate. I really hope that the video helps, these DD locks are fantastic fun to pick. Have a great week.
This is great information to go along with locknoobs video yesterday.
Thanks Jim I hope it helped. Have a great week.
Very well explained Daz. Very clear information. Am I right in thinking that if you haven't seen the key to know which is the zero cut disk, it's the one that doesn't click when you fully turn it counter clockwise? Then you would just rotate it back fully clockwise?
Thank you Roy, absolutely that exactly how to find it. Plus I’ve always found that the 0 disc drags through the full rotation of the disc.
Have a great week Roy.
Great info bro.
Thanks Bearsback back mate, have a great week.
Very helpful.
Thank you my friend, I really hope it helps. Have a great week.
Thanks daz very informative video and hope you have a good week
Thanks mate, I really appreciate it.
P.s I’m still can’t get that bloody lock I’ve borrowed of you open. I’m going to have another couple of goes then sent it back.😩 . It tensions from a disc in the middle but with the Classic profile it’s not easy. Have a great week
@@dazevers I was going ask how you was getting on with that lock so a good core in a flimsy body and I'm definitely not in a rush for it's return
Great video. Thanks for sharing. Is the pick made by you?
Thanks mate, yes thats one of mine. Gen 1, I’ve modified a bit now. 😊👍
@@dazevers lovely bit of craftsmanship.
Daz, is the one you’ve just picked, the same as the identical looking Kryptolock Series 2? Gonna try to make my first DD pick from scratch. Will make the tips on the the milling machine and use some thumb wheels from my stainless 1” 2in1 components. Do you know what the maximum tip thickness needs to be to clear each disc?
The Abus & kryptonite are similar apart from the Abus disc locks generally have false gates, the Kryptonite disc locks generally have slightly thinner discs. Some of the kryptolock cores have a small secondary lever/disc at the bottom of the lock that needs to be moved first. Apart from that the tools require are identical. The picking tips i make are 0.3mm but you can go up to 0.5mm , that’s same as the Sparrows DD pick
Did you see my video on how i made my disc detainer pick. Here’s a link. ruclips.net/video/PbAhCvIrFCk/видео.html Any other questions just ask. 👍
Amazing info here thanks a lot !! so when tensioning from a butterfly disc, is it better to use heavy tension or light tension ? I can use this counter rotation technic well on a chinese lock that has a core quite similar to the Kryptonite lock. However, on my Abus 88/40 I seem to have no feedback at all. Maybe it's because of those butterfly disks. Any clue ? What am i doing wrong here ? Thanks man
Hi mate, believe me you are doing nothing wrong, they are pretty tricky locks to pick, the feedback is very subtle until you have all the disc’s in a gate, weather it be false or true. As for the tension you just need a moderate tension.
I’ve just brought another Abus plus lock the Abus 89/40, so when it arrives I will do another in-depth video on it, to try & cover all aspects of picking them. I’ll also use the sparrows DD pick.🤞
Have a great weekend.
@@dazevers that would be great, I can't wait for this video you're going to make. Still don't get any feedback at the moment from my Abus 88/40 I don't know why... Still trying to figure it out.
very interesting, i havent messed about to much with these locks , so would you need 3 differnt tools for top bottom and middle tension ? i see sparrows now to do top tension tools but never seen the other 2 types for sale ,
Thanks my friend, the Silver bullet is the only commercially available DD that will tension all three ways.
great video. As I also wrote in comment to lock noob. LPL does this trick so often, but never explain it in details for the beginners to understand the trick.
Thank you so much Rune I really appreciate it. I hope it helps more people to pick these wonderful locking systems.
Have a great week my friend.
Past my ability. Thanks Daz. Take care
Thanks Randy, you too have a great week.
If you didn't have the key how would you know which is a zero cut please
I have never practiced any cylinder with disc
You really should they are wonderful locks to pick, have a great week.
What kind of tool did you use?
This DD pick I made my self, just from some 20mm Alu bar & Stainless tube. Nice, simple & cheap. Have a great week.
@@dazevers was that a injector pin
Cool
Thanks mate, have a great week. 👍
Başarılı,takipteyim,kanalıma beklerim,görüşünüz önemli
Thank you my friend. Have a great week.