$30 PVC P-Rail in 5 Minutes (2023)

My old rail from the video I made years ago is no longer here. So I had to build a new PVC p-rail but with post-inflation pricing it’s about $10 these days. Still not terrible if you ask me!!
At one point you could have done this for $20
• Building a PVC P-rail ...
#prail #inflation #therealkylewood #pandemic

[@djPrawn]

nice one - mine have last over 10 years - can't go wrong with this design

[@therealkylewood]

Thanks! Yeah it’s the Go-2 design for stability and price imo. Until I see another diy video to prove otherwise 😂

[@plaguearttutorials]

Nice they're looking more like I make my own PVC
Would like to see you make a another rail exactly the same size that locks on
To the current rail for longer grinds easy to find pieces that will lock it together at any hardware store

[@therealkylewood]

Will do, this is a great idea. We’ve done it with skate boxes.

[@djstylistik]

Plumbing PVC runs 1 1/4” - 1 1/2” - 2” looks like you have 1 1/4” which is uncommon. 2” might be best because it will go over the wood and you won’t stick. May get wheel bite riding flat though

[@aloysiusexpialidocious]

Subbing for this video! Muchos gracias! I wanted a p rail but didn't want to drop over $1-200 to buy one online.

[@rollforever_85]

Wish there was a space at my house to use one of these

[@zernicht9r286]

haha i dont believe you have a one house

[@iitstre_4550]

Got mine for I think $17 total because I got my wood on a 90% discount 😂.
Building it today

[@therealkylewood]

Appreciate this update. Let us know how you like it!!

[@mikegordon697]

Good job!

[@Lunarl4ndr]

Why not put the screws through the wood into the pipe instead of drilling holes in the sliding surface?

[@therealkylewood]

Well it’s a 2x4 so that would not be so easy… I don’t think. Try it and let me know how it goes.

[@thequestlivetolearntolive.8555]

Thank you im going today to get one

[@therealkylewood]

Love it. Let me know if you have any questions at all!

[@Miajuana444]

Do you know if quadskate/slide blocks would snag on the screws??

[@therealkylewood]

I’m very confident quads would slide fine on this. I’d say about 90% sure. But not 100. Hope that helps!

[@Hey_Alfred]

Quads with slide blocks will work fine. The screws are below the top of the pipe so no danger.

[@DiegoRibeiroyoutuber]

What is the size of the two pieces of wood standing upright? 10CM?

[@therealkylewood]

2x4” so yes I believe so.

[@RicaSkateShop]

360 X really?

[@ismaelgonzalez5475]

Do you feel like the angle of the wood gets in the way of soulplate tricks?

[@therealkylewood]

No doubt, that’s the biggest drawback. It’s not terrible for soul tricks, negative tricks are extra tough though.

[@Ikki3694]

What size drill bit did you use?

[@therealkylewood]

I really don’t remember. The key is to get the hole just large enough to fit the screw head.

[@Rene_Dillon]

Me and my son want to make this one, we made the one without the hinges and had an extra board under the rail

[@therealkylewood]

Super easy, I hope it works great for you!!

[@86lanzo]

What's the better design in your opinion?

[@Rene_Dillon]

​@86lanzo honestly works the same as long as it's stable , that's what's most important, I hate when you soul slap it and it flips over

[@Nick-ih5em]

So if you way about 90lbs this would work just fine?

[@therealkylewood]

This thing can handle up to around 250 lbs jumping on it. Haha so yeah it will hold you. Only thing I’ll add is if you use a pvc pipe like I show, and keep it outside in extreme temperatures, the pvc itself may break or crack if you are tough on it. But it takes quite a bit to break one of these. And if you do, you would just need to replace the pvc part only, which can easily be done.

[@pawellaby3223]

Bro , How long is that rail ?

[@therealkylewood]

I believe 10ft!

[@pawellaby3223]

Its 250 cm? 😂

[@pawellaby3223]

or 300 cm ?:D@@therealkylewood

[@therealkylewood]

@@pawellaby3223 yes based on google 300cm would be right.. next time YOU google it! 🤦‍♂️

[@DiegoRibeiroyoutuber]

🤣@@therealkylewood