Installing an Island

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 22

  • @zibusisomalelencube
    @zibusisomalelencube 9 лет назад +1

    Love your work...AB-SOUL-UTELY.. 😊All the way from capital pàrk , pretoria .... South Africa. Your work has strengthened to my resolve to go ply.

  • @brandiandjasonpinkerton9481
    @brandiandjasonpinkerton9481 7 лет назад

    Really nice work! Very informative video that will help me with my install.

  • @jenniferstedham2196
    @jenniferstedham2196 3 года назад

    If you wanted to relocate an island installed this way, where would you start?

  • @karlmadsen3179
    @karlmadsen3179 3 года назад

    Was that island assembled from a flat pack (e.g. IKEA)?

    • @KerfDesign
      @KerfDesign  3 года назад

      No, we build custom cabinets, it's one of ours.

  • @cyanide786
    @cyanide786 4 года назад

    How would you attach a toe kick to a floor that has ceramic tile?

    • @KerfDesign
      @KerfDesign  4 года назад

      You would have to drill through the tile so that you could anchor into the sub floor. Sometimes it is easier to drill at the grout lines than it is to get through the tile.

    • @cyanide786
      @cyanide786 4 года назад

      @@KerfDesign thanks so much. Any tips on drilling so you dont crack the tile?

    • @KerfDesign
      @KerfDesign  4 года назад

      ​@@cyanide786 I hold my breath. And use a hammer drill. I"d cross my fingers but they are holding the drill. Maybe better to get advice from a tile shop. It depends a lot on the tile you are drilling into.

  • @sethgrueneberg
    @sethgrueneberg 9 лет назад

    Nice. Thanks! And you can run a screw through the top of the foot into the floor for anchoring the toe kick?

  • @masterbuiltdesigns6734
    @masterbuiltdesigns6734 7 лет назад

    How would you go about securing that island if it was tiled floor?

    • @larrybailey5080
      @larrybailey5080 7 лет назад

      Looks like im would use the same principles as screwing into a hard wall. By using wall plugs im guessing. I have a island to fit as well so need to know the right answer as well as my island will be going on to a tiles floor

    • @jamestv58
      @jamestv58 6 лет назад

      tapcons

    • @ericl113
      @ericl113 5 лет назад

      Screw a piece of 2x4 into the grout and then use a L bracket or screw right into the cabinet through the 2x4. Just make sure to use the right screw length

  • @sethgrueneberg
    @sethgrueneberg 9 лет назад

    What kind of levelers are you using?

    • @nathanhartman8861
      @nathanhartman8861 9 лет назад

      Seth: This isn't our supplier, but they look like this: www.replacementtablelegs.com/steel-cabinet-and-furniture-leveler-heavy-duty-abs-insert-330lb-weight-capacity-100-pack/

  • @sethgrueneberg
    @sethgrueneberg 9 лет назад

    Hey Nathan, I contacted that supplier but they only sell bags of 100. Unfortunately I only need 10. Anyway you could sell me some of your stock? I'm striking out finding another supplier. Thanks.

  • @bryanjaimes3191
    @bryanjaimes3191 7 лет назад

    looks like you took over 4hrs on this island alone

    • @MrStingray186
      @MrStingray186 7 лет назад

      Ya he should have rushed it so it was all screw up. GEEEEZ

  • @michaelglaser1669
    @michaelglaser1669 7 лет назад

    your floors are going to buckle.

    • @lyndafyelds1906
      @lyndafyelds1906 6 лет назад

      michael glaser no the floors aren't going to buckle.