I was debating about getting these exact headers for my Impreza. Now I will for sure get them! Thank you for the tips on installing it and the sound clips!
I love how invested this guy is this thing is something else i love it, i cant stand the people that are like why are you modding it? Its not a sti bla bla
I got a header for my civic from inferno fab. the only part about getting headers from him is the wait, I waited about 4 months for mime to come in but ot was more than worth it. The quality of the custom work Steve does is awesome. I really hope inferno fab gets just as big as brands like yonaka or borla.
Just started building my 15 2.0i, still trying to get my brain around the exhaust for this car, i love your setup, but are you running all the r400 parts after the header?
Do you feel a lack in performance switching from equal length to UEL. I've read that there are performance issues but I didn't think it would matter. Also is the cat legit, and it won't throw codes ?
@@WillisDo you got that right man, This is pretty much the only place iv found that has uel in stock or at least has an option to have them made. Im ordering same thing in a week or so.
UEL’s aren’t going to add power, as the exhaust won’t scavenge properly with the pulses from each cylinder colliding in the collector. It’s for sound, for performance you want an EL setup. Although on a essentially stock FB20 the difference will be very minimal
@@BhOLeD I finally got my full system from him. Apparently he is very popular, but still works another job full-time. I got my set, but he built the wrong cat back system. He said he will take care of it. I'm assuming it will take a while. So far the craftsmanship is really good. Super clean welds. Supply your own bolts though.
@@PieceofSlice There was one random occurance of a CEL in extreme cold weather but it has never appeared since. I recently passed PA Emissions with this setup with no issues.
I was debating about getting these exact headers for my Impreza. Now I will for sure get them! Thank you for the tips on installing it and the sound clips!
I love how invested this guy is this thing is something else i love it, i cant stand the people that are like why are you modding it? Its not a sti bla bla
I got a header for my civic from inferno fab. the only part about getting headers from him is the wait, I waited about 4 months for mime to come in but ot was more than worth it. The quality of the custom work Steve does is awesome. I really hope inferno fab gets just as big as brands like yonaka or borla.
I was 11 months brother i got the ej25i uel header. Absolutely gorgeous welds and sounds amazing but damn it took a long time
Congrats on 1k my guy! Keep up the good work!
Thanks man! Let's link up soon.
Sounds great, but why in the world would you opt for the CVT? I would never trade the 5MT in my '15 Impreza for any Subaru CVT.
Ayee that rear wing is dope and the car sounds great 👍
Do you need a tune for UEL on the FB20? I know if I wanted to do UEL on my FA20DIT, I’d need to do a loooot.
Excelente video 🥳🎉🎊
Excelente canal felicidades 🍾🎊🎉🎈
Saludos desde chile 🇨🇱 chile 🇨🇱
I wonder if this header will do anything to the 0 to 60 time ?
Does the 2012 subaru impreza have UEL stock headers? Please respect comment ✌️
Let’s go!
Where did you get it
So is there anyone to get this motor to 250 300 hp
Just started building my 15 2.0i, still trying to get my brain around the exhaust for this car, i love your setup, but are you running all the r400 parts after the header?
How do you get your car to bounce off the rev limiter like at 9:23?
Hold down the throttle lol. There's nothing special done
@@WillisDo I never had the balls to rev that high at idle! Lmfao I did not know that happened
@@dawnofthedew7303 rev limiter on these is like 4K
Do you feel a lack in performance switching from equal length to UEL. I've read that there are performance issues but I didn't think it would matter. Also is the cat legit, and it won't throw codes ?
Could you link the headers you used?
What can we do to get more power out of the fb20? Or is there a sensible motor swap?
Stainless or mild ?
Wear can I fined the headers I have Been looking all over the place
You can find them at Inferno fabrications website
Hey dude, why did Subaru stop using UEL? why did they delte that beautiful Burble??? They could have at least kept it for the Sti's?
The EJ motors still have uel headers
Thanks for making the video. About how long did it take for you to remove and install the new headers?
It doesn't take that long, it's like any other exhaust piece.
How much hp gain with the headers? No cel? No loss power?
It that a broadway mirror in your car?
Are there any chip tunes for this car?
I wonder if these will fit my 2014 crosstrek
It will
Just saw you 2 days ago in pa by the royal farms. Car looked good and sounded great my man. Hmu if you are in the area again
willis can you give me the heardes information for me to buy it thanks
What's the weight difference between the stock and inferno fab headers?
Feels a little lighter but I didn't weigh them.
what did you do with the 4-1 uel you had?
Hey Willis did you decide to sell your old CNT headers with the weld missing? I'd be interested if you wanna sell it!
DM me on IG @will.kgfx
@@WillisDo Dm'd you!
What header is that. I've been looking for a set. Can't seem to find any for the 2.0i sport.
Inferno Fabrications Catted UEL Header. infernofab.com although I recommend messaging him on Facebook first.
What wheels do you have? What’s ur specs?
What horsepower is your Impreza pushing with the mods you've installed?
About 5 more then stock. These are not motors for power gains
So this is all off the FB20D platform? You have the same engine as a 2017 Subaru Impreza?
I guess I should add. Does that matter?
Yo where you got the coil overs for this car it’s hard to find some ? Mines a 2016
08-14 wrx coils will fit. I'm on Silver's Neomax
I'm running bc racing coilover on mine
you should upgrade the head unit in that car, it's really bad especially with iphone. nice car.
What wheels do you have? i have the same car and i loveeee the look and fitment!
In this video they are Volk Racing TE37SL
Willis Do got a wing on.
Would this header set up fit a 2018 Impreza sport?
no
Did you get the original splash guards back on?
Yes, although there a few spots where the header has melted through. Nothing major though.
I have a 2017 impreza.....will this fit for mines??
Not too sure
What shift knob do you have?
Mishimoto weighted
Does it fit on a ej25? i 2.5
This is designed for 2.0
does this add any horsepower or just because it sounds good?
Probably adds something but it just sounds good pretty much lol.
@@WillisDo you got that right man, This is pretty much the only place iv found that has uel in stock or at least has an option to have them made. Im ordering same thing in a week or so.
UEL’s aren’t going to add power, as the exhaust won’t scavenge properly with the pulses from each cylinder colliding in the collector. It’s for sound, for performance you want an EL setup. Although on a essentially stock FB20 the difference will be very minimal
How long was your exhaust delay? I've been waiting 6 months for my full exhaust.
Didn't have to wait long. Ordered from SMY Performance
@@WillisDo what did you order from Inferno?
Sorry thought you were talking about my catback. I ordered the headers from Inferno
@@WillisDo how long did those take? I ordered a full exhaust from Inferno and it's been 6 months.
@@BhOLeD I finally got my full system from him. Apparently he is very popular, but still works another job full-time. I got my set, but he built the wrong cat back system. He said he will take care of it. I'm assuming it will take a while. So far the craftsmanship is really good. Super clean welds. Supply your own bolts though.
Hey man Do i need a tune for this?
To get full benefits yes, but it does not trigger a CEL
@@WillisDo Have you got a CEL yet? I notice it takes a while for them to appear
@@PieceofSlice There was one random occurance of a CEL in extreme cold weather but it has never appeared since. I recently passed PA Emissions with this setup with no issues.
@@WillisDo Awesome thanks
Is your Subaru turbocharged?
No way in hell to turbocharge a 2.0i engine. Too high of a compression ratio. Engine go boom lmao.
Did you get a tune for the headers
Suban mas videos de SUBARU IMPREZA
O SUBARU WRX
SUBARU WRX STI
To bad they stopped making header for the older impreza
Hi fb20 frm singapore
These WILL turn on your check engine light.
In my experience, after having these installed for a year, I have never got a check engine light. You will get one if the cat goes bad
@@WillisDo It must depend on the year.
Thats EL not UEL
Still waiting for my money back from Inferno....(6 months)....no headers....no money back
so different from the EJ 😢
is this the brz engine with a turbo or na impreza engine?